jbc JTSE-1UA User manual

JTU
Hot Air Control Unit
INSTRUCTION MANUAL

Manual ............................................................1 unit
Ref. 0027698
Power cable .................................................1 unit
Ref. 0023715 (100V / 120V)
0023714 (230V)
JTU Control Unit .......................................1 unit
Packing List
The following items are included:
This manual corresponds to the following references:
JTSE-1UA (100V / 120V)
JTSE-2UA (230V)
22

E2064
Extractor 64
(20x26mm)
Hot Air Button
(On / Off)
Power Socket
Fuse
USB Connector
Robot RS232 Connector
P405 Pedal Connector
Equipotential Connector
Auxiliar Connector
Heating Element
JTT
Heater Hose Set
JTS
Stand for JT
Heater Hose Set
Thermocouple Type K
Activates the Suction Pump
USB-A Connector
Features and Connections
A2330
Suction Tube for
Protectors & Extractors
Control Unit
Control Unit
33
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240
ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240 ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240
ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
· Add point
· Delete point
· Load profile
· Save profile
· Exit
Current
Air
Temp.
Data for
These Points
Profile
Name
Current
Air flow
Current
External
TC Temp.
In this mode you can set up or edit as many as 25 air flow and temperature profiles.
Edit Mode
Menu
Options
Profiles
Advanced Functionalities
To work with profiles it is essential to use RWB / RWS / RWT rework arms. The
Rework Arms supports the Hot Air Heater maintaining the distance and position to
the component.
19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240
ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250 ºC
Flow
60%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
Menu Options
Station
Information
Current
Air
Temp.
Selected
Air
Temp.
Instant Power
Supplied to
Heater
Time to
Stop
Selected
Air Flow
Selected
External TC
Temp.
JT / TE Work Screen
Status Bar
JT/TE offers an intuitive user interface which provides quick access to station parameters.
Default PIN: 0105
Current
External
TC Temp.
Station Tools Counters
ResetLanguage
Set the station
parameters
Set the tool
parameters
Display the hours
worked in each cycle
It is possible to
choose the language
from a list.
Allows you to carry
out an overall station
reset restoring all the
parameters to their
default values.
Station troubleshooting available on the product page at www.jbctools.com
Troubleshooting
44

19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240
ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240 ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240
ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
· Add point
· Delete point
· Load profile
· Save profile
· Exit
Current
Air
Temp.
Data for
These Points
Profile
Name
Current
Air flow
Current
External
TC Temp.
In this mode you can set up or edit as many as 25 air flow and temperature profiles.
Edit Mode
Menu
Options
Profiles
Advanced Functionalities
To work with profiles it is essential to use RWB / RWS / RWT rework arms. The
Rework Arms supports the Hot Air Heater maintaining the distance and position to
the component.
55
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

JBC Net
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
System Notifications
Station software update.
Press INFO to start the process.
Warning.
Press INFO for failure description.
Error.
Press INFO for failure description,
the type of error and how to proceed.
The following icons will be displayed on the screen’s status bar.
19:29
20ºC
Power
45% 120ºC Selected
TC
Temp.
4m 38s
400ºC 80%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
Hot Air Temp
240
ºC ºC %
Ext. TC Temp
20
Air Flow
80
3m 18s
19:29
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
19:29
Ext. temp
450
400
350
300
250
150
100
50
200
Power Temp
19:29
JT-A
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
By pressing Graphics in the main MENU, temperature and power figures in real time
are displayed. This helps you decide which nozzle to use to obtain the best quality
solder joints.
Graphics
Temperature
Power (%) External
Temp.
Export Graphics
Insert a USB flash drive into the USB-A
connector to save your soldering process
in csv format.
The first system to optimize traceability in soldering
- Get greater quality and control in your production
- Manage your whole soldering process remotely in real time
Station Update
Download the JBC Update File from
www.jbctools.com/software.html
Insert the USB flash drive with the file down-
loadedto the station.
Files
Update
66

TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. AirFlow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
NH
NH
NH
NHS (NH)
JTS
TES
JTT
JTT
JTT
NH
NH
NH
NHS (NH)
JTS
TES
JTT
JTT
JTT
Adjustable Stand
Operation Modes
Press Press
1. From the Tool Settings Menu, select the mode to activate the tool depending on the task.
2. The tool stops blowing when pressing the start/stop button.
If the stand is connected to the station and for safety it will also stop when returned to the stand.
Tool button Pedal (not included)
Adjust the tool holder angle to suit your work position.
Press the start/stop button to blow hot air. Press the Pedal P405 to blow hot air and
release to stop.
77
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
We recommend using the protector + tripod We recommend using the manual extractors
Protectors & Extractors
1 2 3 4
For small components (fig. 1 and 2). For large components (fig. 3 and 4).
Position the extractor with the
appropriate suction cup and
press the suction button.
Heat the component. The component lifts off
automatically when the
solder melts.
Operation
3. Extracting1. Placing 2. Heating
88

Protectors
No.*Ref. AxB (mm)AxB (in) No.*Ref. AxB (mm)AxB (in)
P3353 4,3 x 3 0.16 x 0.12 P1249 12 x 23 0.47 x 0.9
P3786 5,2 x 5,2 0.20 x 0.20 44 P4000 12,5 x 12,5 0.49 x 0.49
P3352 5,2 x 7,5 0.20 x 0.29 P3354 13,2 x 13,2 0.52 x 0.52
P3355 5,2 x 9,5 0.20 x 0.37 P4025 13,5 x 21,5 0.53 x 0.85
P3356 6,2 x 4,2 0.24 x 0.16 48 P2230 15 x 15 0.59 x 0.59
P3785 7, 2 x 7, 2 0.28 x 0.28 60 P4010 17 x 17 0.67 x 0.67
P3784 8,2 x 8,2 0.32 x 0.32 P4005 18 x 29 0.71 x 1.14
P4035 9 x 13 0.35 x 0.51 P4030 18,5 x 18,5 0.73 x 0.73
P4040 9,5 x 19 0.7 x 0.74 P1068 18,5 x 24 0.73 x 0.94
P4080 9,5 x 21 9.5 x 0.83 P2685 28,5 x 28,5 1.12 x 1.12
32 P2220 10 x 10 0.39 x 0.39 P4085 31,5 x 31,5 1.24 x 1.24
P4045 10,5 x 21 0.14 x 0.82 P2672 33 x 46 1.30 x 1.18
P4090 11 x 16 0.43 x 0.63 P4002 50 x 50 1.97 x 1.97
24 P2235 12 x 17 0.47 x 0.67 P3357 52,5 x 14 2.06 x 0.55
øD
* Position in Extractor Stand
Tripods
Ref. øC (mm) øC (in)
T2050 39 1.53
T2250 85 3.35
Manual extractor
Ref. øD (mm) øD (in)
E2190 70.27
Extractors
No.*Ref. AxB (mm) AxB (in)No.*Ref. AxB (mm) AxB (in)
52 E2052 20 X 20 0.79 x 0.79 E4015 31,5 X 31,5 1.24 x 1.24
64 E2064 20 X 26 0.79 x 1.02 E2084 33 X 33 1.30 x 1.30
80 E2184 24 X 24 0.94 x 0.94 E2100 38 X 38 1.50 x 1.50
E2068 27 X 27 1.0 6 x 1.06 E2124 45 X 45 1.77 x 1.77
E4020 28,5 X 28,5 1.12 x 1.12
Accessories (not included)
99
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. AirFlow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. AirFlow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
Using the Thermocouple Type K
You can choose from two work modes:
Regulation: the station regulates the air
temperature automatically to maintain the
External Thermocouple (TC) temperature.
IPC* does not recommend exceeding ramp-up rates over 3-4ºC / sec. (5-7ºF / sec) so as to reduce
the risk of thermal stress on the PCB.
* IPC was founded in the U.S. in 1957 as the Institute for Printed Circuits.
Fix the TC with Kapton Tape (Ref. PH217) as near as possible to the component being worked on.
If Kapton tape is not ESD you must use an ionizer.
Protection: the station cuts the air supply off
when the External Thermocouple (TC)
temperature is reached.
Connect a TC type K (PH218) to the station and use it as a protection or regulation sensor.
You can define its use mode by means of the “Ext TC mode” option in the “Tool” menu.
1010

TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
NH
NH
NH
NHS (NH)
JTS
TES
JTT
JTT
JTT
NH
NH
NH
NHS (NH)
JTS
TES
JTT
JTT
JTT
In case of a loosely fitting nozzle:
*Ref. Shape Size
(mm)
Size
(in)
*JN2020 Straight Ø 8 Ø 0.31
JN8417 Straight Ø 10 Ø 0.4
*JN2015 Bent Ø 4 Ø 0.16
*JN2012 Bent Ø 6 Ø 0.24
JN6633 Bent Ø 8 Ø 0.31
JN7637 Flat 10 x 2 0.39 x 0.08
JN7638 Flat 20 x 2 0.79 x 0.08
JN7639 Flat 30 x 2 1.18 x 0.08
Straight Bent Flat
Ø Ø A x B
1. Push the nozzle tab inwards with a screw-
driver or flat-nosed pliers.
2. Assemble the nozzle onto JTTagain.
Nozzle Extractor
Turn the tool off and handle with care. The heating element and the nozzle are still hot.
Compatible Nozzles
JTTworks with JT nozzles. Find the model that
best suits your soldering needs in www.jbctools.
com
* Supplied with JT
Place the heating element with its nozzle in the
nozzle changer and pull the tool to remove it.
The nozzle comes to rest in the nozzle storage.
Attach the nozzle and press the nozzle onto the
heating element with the help of the opening
in the nozzle changer.
1. Removing Nozzle 2. Attaching Nozzle
1111
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. Air Flow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
1
2
Note: Only perform this operation when the element is cold and the unit is disconnected from the
mains.
Loosen the screw (1) and pull the worn heating element out of the handle (2).
Insert the new heating element, make sure its pushed all the way in (2) and tighten the screw (1).
Replacing the Heating Element
JTT
Heater Hose Set
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)
JTH
Heating Element for JTT
JTH1: Ref. 0014105 (100V and 120V)
JTH2: Ref. 0014107 (230V)
Handle for JTT
Ref. JT-A (100V / 120V / 230V)
Changing the JTT Heater Hose Set
1
2
Note: Only perform this operation when the
station is turned off.
Use a spanner to unscrew the nut (1) and
remove the tool hose (2).
Insert the new hose, make
sure it is pushed all the way
into the connector (2), and
tighten the nut (1).
1212

TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. AirFlow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp. AirFlow Selec.
TC
Suction
OK
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
Maintenance
Clean periodically
Before carrying out maintenance, always allow the equipment to cool.
- Clean the station screen with a glass cleaner or a damp cloth.
- Use a damp cloth to clean the casing and the
tool. Alcohol can only be used to clean the
metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Periodically check all cables and tubes.
- Replace a blown fuse as follows:
1. Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2. Insert the new fuse into the fuse holder
and return it to the station.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Fuse holder
Fuse holder
Fuse
1313
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

Safety
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded before
use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode. The
soldering tip or nozzle, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working
to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced physical,
sensory or mental capabilities or lack of experience provided that they have been given adequate
supervision or instruction concerning use of the appliance and understand the hazards involved.
Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
1414

Specifications
JTU
Hot Air Control Unit
Ref.: JTSE-1UA 100V - 120V 50/60Hz. Input fuse: 8A. Rated current: 7A
Ref.: JTSE-2UA 230V 50/60Hz. Input fuse: 4A. Rated current: 3A
- Temperature selection: Room temp. 150 - 450 °C / 300 - 840 °F
- Nominal power: 700W
- Cool mode: T off. Used to blow air to room temperatur
- Ambient operating temp.: 10 - 50 ºC / 50 - 122 ºF
- Air flow regulation: 5 - 50 SLPM
- Vacuum: 30% / 228 mmHg / 9 inHg
- Connectors: USB station-PC
Robot RS232
P-005 Pedal
- Control Unit Dimension/Weight: 1.90 kg / 4.2 lb
(L x W x H) 230 x 148 x 160 mm / 5.83 x 7.24 x 5.51 in
- Total Net Weight:
- Total Package Dimension/Weight: 258 x 328 x 208 mm / 2.56 kg
(L x W x H) 10.15 x 12.9 x 8.2 in / 5.64 lb
Complies with CE standards.
ESD safe.
1515
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0027698-130522