Kaabo Skywalker 8 User manual

Skywalker

Product Introduce
Safety Instruction
Open & Fold
Basic Operation
Take The First Ride
Daily Maintenance
FAQS
Warranty
Memo
1
15
16
18
21
23
24
25
26
CATALOGUE

0201
01 PRODUCT
INTRODUCE
PRODUCT DIAGRAM 8
[2]
[5]
[3]
[6]
[8]
[11]
[9]
[12]
[1] Handle [2] Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8] Light&Horn [9] Protecon Pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 8” Tire [14] Kickstand [15] Motor
[1]
[15] [14]
[10]
[13]
[7]
SPECIFICATION 8
38 km/h
Max. Speed
3-5 h 6-8 h 4-6 hCharging
Rear Drum Brake + Electronic Brake
8.0 x 2.0 Tires
350 w 500 w
Motor
Brake
Tire
N.W 16 kg 18 kg 19.3 kg
Configuraon 36V
10.4AH
36V
21AH
48V
13AH
28-32 km 65-70 km 45-50 km
Max. Range
Front Shock Absorber
1100 x 190 x 320 mm
Shock Absorber
Open Size 1050 x 560 x 1150 mm
Folding Size
1070 x 260 x 430 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
[4]

PRODUCT DIAGRAM 8H
[1] Handle [2] Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8]Light&Horn [9] Protecon Pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 8” Tire [14] Kickstand [15] Motor
[2]
[5]
[4]
[3]
[6]
[8]
[11]
[9]
[12]
[1]
[15] [14]
[10]
[13]
[7]
03 04
35 km/h 38 km/h
Max. Speed
3 - 5 h 6 - 8 h 4 - 6 hCharging
Rear Drum Brake + Electronic Brake
8.0 x 2.0 Tires
350W 500W
Motor
Brake
Tire
N.W 17.3 kg 19.4 kg 18.6 kg
Configuraon 36V
10.4 AH
36 V
21 AH
48 V
13 AH
28 - 32 km 65 - 70 km 45 - 50 km
Max. Range
Front and Rear Shock Absorber
1060 x 190 x 320 mm
Shock Absorber
Open Size 1070 x 560 x 1150 mm
Folding Size
1120 x 260 x 430 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
SPECIFICATION 8H

05 06
SPECIFICATION 8S
40 km/h
Max. Speed
4 - 6 hCharging
Rear Disc Brake + EABS Electronic Brake
85mm Soild Tire
800 w
Motor
Brake
Tire
N.W 22 kg
Configuraon 48 V
13 AH
40 - 45 km
Max. Range
C Shock Absorpon
1080 x 190 x 350 mm
Shock Absorber
Open Size 1100 x (520 ~560) x 1150 mm
Folding Size
1120 x 260 x 430 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
PRODUCT DIAGRAM 8S
[1] Handle [2]Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8] Light&Horn [9] Protecon Pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 8” Tire [14] Kickstand [15] Motor
[2]
[5]
[4]
[3]
[6]
[8]
[11]
[9]
[12]
[1]
[15] [14]
[10]
[13]
[7]

07 08
SPECIFICATION 10
38 km/h 42 km/h
Max. Speed
3 - 5 h 6 - 8 h 4 - 6 hCharging
Front and Rear Disc Brake + Electronic Brake
10.0 x 2.25 / 10.0 x 2.5 res
400 w 500 w
Motor
Brake
Tire
N.W 17.3 kg 19.3 kg 18.6 kg
Configuraon 36 V
10.4 AH
36 V
21 AH
48 V
15.6 AH
28 - 32 km 65 - 70 km 50 - 55 km
Max. Range
No
1120 x 240 x 360 mm
Shock Absorber
Open Size 1135 x 560 x 1200 mm
Folding Size
1200 x 300 x 450 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
PRODUCT DIAGRAM 10
[1] Handle [2] Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8] Light&Horn [9] protecon pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 10” Tire [14] Kickstand [15] Motor
[2]
[5]
[4]
[3]
[6]
[8]
[11]
[9]
[12]
[1]
[15] [14]
[10]
[13]
[7]

09 10
SPECIFICATION 10H
38 km/h 42 km/h
Max. Speed
3 - 5 h 6 - 8 h 4 - 6 hCharging
Front and Rear Disc Brake + Electronic Brake
10.0 x 2.25 / 10.0 x 2.5 res
400 w 800 w
Motor
Brake
Tire
N.W 19.6 kg 21.7 kg 21.4 kg
Configuraon 36 V
10.4 AH
36 V
21 AH
48 V
15.6 AH
28 - 32 km 65 - 70 km 50 - 55 km
Max. Range
Front and Rear Shock Absorber
1170 x 240 x 360 mm
Shock Absorber
Open Size 1186 x 560 x 1200 mm
Folding Size
1240 x 300 x 430 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
PRODUCT DIAGRAM 10H
[1] Handle [2] Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8] Light&Horn [9] Protecon Pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 10” Tire [14] Kickstand [15] Motor
[2]
[5]
[4]
[3]
[6]
[8]
[11]
[9]
[12]
[1]
[15] [14]
[10]
[13]
[7]

SPECIFICATION 10S
50 km/h 60 km/h
Max. Speed
Charging
Front and Rear Disc Brake + Electronic Brake
10.0 x 2.25 / 10.0 x 2.5 res
800 w 1200 w
Motor
Brake
Tire
N.W 23.5 kg 25 kg
Configuraon 48 V
23.4AH
60 V
23.4 AH
80km 90 km
Max. Range
1220 x 230 x 380 mm
Shock Absorber
Open Size 1208 x 560 x 1200 mm
Folding Size
1260 x 300 x 470 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
PRODUCT DIAGRAM 10S
[2]
[5]
[4]
[3]
[6]
[8]
[11]
[9]
[12]
[1]
[15] [14]
[10]
[13]
[7]
11 12
12 h (2A charging) 12 h (2A charging)
6 h (4A charging) 6 h (4A charging)
Front Type C Shock Absorber
Rear Common Shock Absorber
[1] Handle [2] Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8] Light&Horn [9] Protecon Pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 10” Tire [14] Kickstand [15] Motor

13 14
SPECIFICATION 10S+
60 km/h
Max. Speed
12 h (2A charging)
6 h (4A charging)
12 h (2A charging)
6 h (4A charging)
Charging
Front and Rear Disc Brake + Electronic Brake
10.0 x 2.25 / 10.0 x 2.5 Tires
800 w x 2 1000 w x 2
Motor
Brake
Tire
N.W 29 kg 30.5 kg
Configuraon 48 V
23.4 AH
60 V
23.4 AH
80 km 120 km
Max. Range
Front Type C Shock Absorber
Rear Common Shock Absorber
1220 x 230 x 380 mm
Shock Absorber
Open Size 1208 x 560 x 1200 mm
Folding Size
1240 x 300 x 430 mm
Package Size
* The specificaon can be changed by manufacturer to meet the requirements and laws of
different countries and regions.
* The distance can be affected by loaded weight, wind direct (wind speed), riding surface
density, slope and re condion.
PRODUCT DIAGRAM 10S+
[2]
[5]
[4]
[3]
[6]
[8]
[11]
[9]
[12]
[1]
[15] [14]
[10]
[13]
[7]
[1] Handle [2] Light&horn Switch [3] Display
[4] Folding Lever [5] T Bar [6] Lock Nut
[7] Main Tube [8] Light&Horn [9] Protecon Pin
[10] Shock Absorber [11] Pedal [12] Rear Light
[13] 10” Tire [14] Kickstand [15] Motor

Safety Instruction
Tips
This Chapter is very important. Please read carefully and understand
all the instrucon. We will not be responsible for any property loss,
casuales, accidents, legal disputes caused by violaon of the safety
instruons on chapter.
5. One scooter for one person only.
1. Do not drive in rainy days.
2. Do not repair by yourself, electric shocks can occur.
3. Please abide by the local road traffic law.
4. Do not acrobacs.
6. Beer to wear safety protecve equipments such as a helmet,gloves,elbow
and knee pads when ride.
7. Please pracce on open ground first,and then ride on the road.
02 SAFETY
INSTRUCTION
8. Adjust to a suitable height to avoid injury.
9. Suggest to charge six hours before the first me to ride the scooter.
10. Do not cut off the power when scooter is running.
11. Do not climb a step higher than 3cm to avoid turning over and possible injury.
12. Use and storage scooter temperature range is -5℃ to 50℃.
13. If le a long me mo use of the scooter,charge it once every month to
maintain the longevity if the baery.
15. Keep feet on pedal when the scooter is run tuble.
14. Do not ride in puddle deeper than 5cm or avoid sprayed directly by water in
case of motor or electrical faults.
Please do not exceed maximum speed for local traffic
requirements when you driving this equipments,
otherwise there may be danger!
Step1:
Kickdown the lever to unfold the
scooter.Put the safety pin to right
poson to lock it
Step2:
Pull the T-tubes to the le
and right side.
Step3:
Adjust the height by open
the locking nut and move the
main tube up or down.
Step4:
Lock the nut.
Open
03 OPEN
FOLD
Before driving, please make sure the folding lock is
locked, this is very important !
15 16

Step1: Step2:
Step3: Step4:
Step5:
Step6:
Switch off
Pull T-tubes to the le and
right sides respecvely.
Fold the handles.
Open the locking nut.
Withdraw the extension
Unlock the protecon pin.kick down
the folding lever and push the handlebar
forward to fold the scooter.
Always keep protecon pin in posion
when the scooter is unfold
Fold
Power Switch
04 BASIC
OPERATION
Press the power switch for 3 seconds and the LCD panel will light
up, power on now.If the scooter le 90 second unmoved, power
will be off automacally.
Speed Control
Power Indicator
When the power is on ,press the power switch and then
the MODE buon, the screen will show the level of speed.
press Mode to change the Level (L1,L2,L3).
Small rectangles indicates baery power.
Do not wait to change unl baery is fully running out.
Change the scooter mely when there is only one rectangle
or two le to avoid damage of baery.
17 18

19 20
DISPLAY &
KEY SETTINGS
3. Power Buon. To turn the scooter on or off press buon for 2 seconds.
4. Accelerator. Pull to accelerate. The stronger you pull, the faster it
accelerates. The scooter is delivered in “Non-Zero Start” seng
(Kick-And-Go is ON), i.e. the accelerator only works if the scooter is
already in moon.
5. Mode Buon. Press to select various display opons:
Detailed P-sengs mode. To access P-sengs to make various advanced
changes, press POWER [3] and MODE [5] simultaneously for 2 seconds.
Cycle through the P-sengs using the MODE buon. To select a P-seng in
order to make changes press the POWER buon. Change the value (up or
down) using the MODE (Up) and POWER (Down) buons. To return to the
P-sengs menu aer changing a value, wait 2 seconds. To return to operang
mode, wait a further 2 seconds. Only
COMMENTMODE
TIME Time since powering on the scooter.
TRIP Distance travelled since powering on the scooter.
ODO Total distance travelled.
VOL Current baery voltage.
CH2:00 Charging mode. Time (2 hours) scooter stays ON (overrides auto-switch off)
so you can use display’s USB port to charge e.g. your phone.
P-SETTINGS
P0 Tire diameter .
P1 Controller shut-down voltage. Default set to 52V .
P2 Motor magnec pole seng. Default is 30. Do not change.
P3 Speed signal selecon. Default is 0. Do not change.
P4 Distance / speed unit. 0=km, 1=miles
P5 Start seng. 1=non-zero start (Kick-and-Go), accelerator won’t work if scooter not in
moon; 0=immediate start (CAUTION while using this!)
P6 Cruise control. 0=cruise control OFF, 1=cruise control ON.
P7 Inial acceleraon. 0=strong, 1=so.
P8 Electric (regenerave) braking (E-ABS). 0=E-ABS off, 1=E-ABS on
P9 Speed limit as % of top speed, i.e. 100=no speed limit.
PA Clear total distance travelled (ODO).
PB Scooter auto-turn off me in minutes.
PC Display brightness (1=low, 3=high)
Driving Mode Selecon
Located underneath the main display on the right side of
the handle bar you can find two switches to configure
driving modes:
The ECO/TURBO switch regulates the power of your scooter. By pressing
down the buon, ECO mode is acvated which will reduce torque and top
speed to maximize range. When the buon is not pressed, TURBO mode is
acvated and there is no restricon of power.
The SINGLE/DUAL switch toggles single or dual motor drive. By pressing down
the buon DUAL motor drive is acvated. When the buon is not pressed,
SINGLE (rear) motor drive is acvated.
For Maximum range, select ECO mode and SINGLE motor drive. For maximum
power and speed, select TURBO mode and DUAL motor drive.
Display Sengs
Scooter is equipped with the following display:
Gear change. To change the gear (1=slow, 2=medium, 3=fast), while the
scooter is powered ON, press the POWER buon to enter gear seng mode.
Press MODE to switch between gears. To return to operang mode either
press POWER or wait for 2 seconds.
1. Speedometer. Shows the speed at which you are travelling.
2. Baery Indicator. Charge your scooter frequently, do not let it run out
of baery. As a rough guideline, charge at or below 2 bars.

Start
05 TAKE THE
FIRST RIDE
You should choose a right place when first riding, which is outdoors and
should be flat, not be slippery and smooth, without obstacles. Spread the
scooter and adjust the T-tube to the appropriate height.
Driving
Parking
1.Press power switch to start.
2.Put one foot on the front secon of the pedal and other foot on the
ground. Boost yourself forward by the foot on the ground to start riding.
Slightly pull the accelerator and lt body forwards.
3.When the scooter starts to go forward, get your feet both on pedal.
The harder you press the accelerator, the quicker you will be.
Slightly and gradually brake to cut power and slow down.
Do not brake hard,otherwise may lead to re arion, or suffer a sudden
loss of power and fall down.
Every piece of the scooter is equipped with specialized lithium baery
and intelligent charger, so do not adopt other brand’s. Other types of
baery are not suitable to the scooter’s charger.
It is me to charge the scooter when the baery meter flickers or
there is only one bar of power le. If le the scooter long me no use,
please charge it once a month at least, otherwise the baery may
become unusable.
Battery & Charger
Lithium Battery
Aer scooter fully charged, please unplug power supply in me.
Charger
1.Insert the charging plug into the charge hole of the scooter first
and then plug the other end to the AC supply.
2.It is under charging when the indicator light of the charger shows red.
And when the red light turns to green. It means the scooter is fully
charged.
(It is suggested that to charge one more hour to guarantee the range
and endurance)
Instruction of Charging
21 22

Scooter T-tubes
DAILY
MAINTENANCE
Re-lubricate the T-tubes once in six months.
Do not use WD-40 to lubricate the product components.
Tire
Brake
Battery
Skywalker 10s both re are pneumac re.
When the braking performance degradaon occurs, adjust the regulator
(nut)in the rear wheel in order to achieve the required sensivity.
The lithium baery of scooter is able to recharge for 1000 mes.
The baery needs changing when range per full charge shortens sharply.
06
When the scooter can not work normally, please check the following list.
- Power is on.
Checking List
FAQs
07
- There is surplus electricity.
- All the hubs and connectors are clean and in accurate link.
If all the above are yes and the scooter sll do not work,
please consult with people involved.
- Brake is unstuck.
23 24
This manual suits for next models
5
Table of contents
Other Kaabo Scooter manuals

Kaabo
Kaabo Mantis User manual

Kaabo
Kaabo Wolf Warrior GT Series User manual

Kaabo
Kaabo MANTIS KING GT Product information sheet

Kaabo
Kaabo Wolf Warrior 25Ah User manual

Kaabo
Kaabo SKYWALKER 8 36V/10.4A User manual

Kaabo
Kaabo Mantis 48V 13Ah User manual

Kaabo
Kaabo WOLF WARRIOR X User manual

Kaabo
Kaabo Wolf Warrior 11 User manual