KI Doni Guide

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Repair & Replacement Instructions
Doni®, Grazi®, Intellect Wave®, Ruckus™, Strive® & Versa® Seating
4-Leg Stack Chair Glide Replacement
March 2019
hoof
nippers
tabletop
chair
steel
glide
steel glide
retainer
cold chisle
mallet
mallet
replacement
steel glide
chair leg
Figure 1
Figure 2
Figure 4
Figure 3
chair leg
chair leg
Steel Glide Replacement
1. Place chair upside down onto a
soft, protective surface or with the
seat portion sitting on a table as
illustrated (Figure 1).
2. Using a hoof nippers, cut/break the
glide portion off. Throw un-used
glide end away (Figure 2).
3. Next, using a mallet and cold chisel,
knock the glide retainer deeper into
the leg so that there is enough room
to insert a new glide (Figure 3).
4. With retainer out of the way, insert
new glide and press into the leg. The
glide may need to be lightly tapped
in using a rubber mallet (Figure 4).

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Doni®, Grazi®, Intellect Wave®, Ruckus™, Strive®& Versa®Seating - 4-Leg Stack Chair Glide Replacement
Repair & Replacement Instructions
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel [phone] • www.ki.com
© 2019 Krueger International, Inc. All Rights Reserved • Code KI-RR-000004R1/KI/PDF/0319
Poly Glide Replacement
1. Place chair upside down onto a
soft, protective surface or with the
seat portion sitting on a table as
illustrated (Figure 1).
2. Using a putty knife, pry up on the
glide edge until it is free
(Figure 2).
3. Once glide its removed, press
in the new replacement glide
Figure 3).
Figure 1
putty knife
plastic
glide
plastic
glide
chair leg
Figure 2 Figure 3
mallet
chair leg
tabletop
chair