KI Lancaster Auditorium Seating Installation instructions

Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Lancaster Auditorium Seating
Page 1 of 2Rev. 0P0033-0061
A. Steel B. Plastic
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure:
1. Remove the screw, washer and nut holding each side of the seat
to the seat support column and remove the seat assembly.
2. Remove the screws and nuts holding the backrest onto the back
supports and remove the backrest assembly.
3. Remove the screws holding the arm cap onto the top of the seat
support column and remove the arm cap.
4. Remove the nuts holding the column onto the floor and remove
the column.
(continued next page)
General Notes:
1. Disassembly time: 15-30 minutes
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
All fasteners not explicitly tagged or
shown are Material Type A: Steel
SCALE 0.050
Gloves Safety Glasses
Pry Bar
Philips Screwdriver Putty Knife
Hex Socket Wrench
Rubber Mallet
Flat Screwdriver
Channel Lock Pliers
Torx Screwdriver Combination Wrench
A
A
B
B

Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Lancaster Auditorium Seating
Page 2 of 2Rev. 0P0033-0061
A. Steel B. Plastic C. Foam D. Fabric E. Wood
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure (continued):
6. Remove the screws holding the backrest shroud onto the back-
rest assembly and remove the shroud. Remove the screws
holding the backrest support brackets to the backrest and re-
move the brackets.
7. Remove the screws holding the seat shroud to the seat and
remove the seat shroud. Remove the screws holding the seat
frame to the seat board and remove the seat frame. Cut the web-
bing sleeve over the seat frame to remove it.
Gloves Safety Glasses Pry Bar
Philips Screwdriver
Hex Socket Wrench
Rubber Mallet
Flat Screwdriver
Channel Lock Pliers
Torx Screwdriver Utility Knife
A
A
B
CDE
A
B
CDE
D