kingsley-bate AK05 Adirondack Ottoman User manual

Kingsley-Bate
AK05 Adirondack Ottoman
Assembly Instructions

KINGSLEY – BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE AK – 05
STEP-I
Unpack, inspect and lay all the parts on a clean,
flat, soft surface to avoid marring the wood.
NOTE: During assem bly of the furniture
please match all the joints with the
corresponding letters or num bers stamped on
the furniture.
STEP-II
Carefully place the SEAT of the ottoman upsid e down and attach the legs to the outside
of the SEAT using the brass sleeves, the knock down bolts and the brass caps provided.
STEP-III
As shown in the diagram, tighten the caps onto the bolts using a proper screw driver and
the enclosed allen wrench.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1 IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]