Kolpin Outdoors 10-0190 Instruction sheet

1
© 2017 Kolpin Outdoors Inc. REV 02
Kit contents:
Rubber Blade Flap
Product Instructions | Part No: 10-0190
Kolpin Outdoors, Inc. | 9955 59th A e N | Plymouth, MN 55442
[phone] or [phone] | www.kolpin.com | customerser [e-mail]
1
2
3
4
Item Qt Part Description Spare PN
1172” Rubber Blade Flap PUR1901
211 Hex Bolt, Zinc Plated, 1/4-20 x 0.75” LG
311 Flat Washer, 1/4”
411 Locknut, Zinc Plated, 1/4-20
CYC0967
Hardware
Package
Kolpin Blade Installation:
1. Align one end hole of the flap, item #1, with
one end hole of the blade on top edge. Use the
blade flap as a template, to drill ¼” diameter
holes into your blade where no pre-drilled
alignment holes exist. Secure the blade with
the pro ided ¼” x ¾” bolts, washers and lock-
nuts. Position the bolts, item #2, as shown,
from the topside down thru the flat washers,
item #3, and then secure with locknuts, item
#4, on underside of top blade edge. Tighten
locknuts to apply slight squeeze to rubber and
make sure the end of bolt is e en with nut bot-
tom or bolt threads extend past the locking por-
tion of locknut.
2. Mark and the trim your excess blade flap to
proper length of your blade using tin snips or
tin shears, as shown.
Note: If any hardware is missing, do
not return to the store. Call us to
help, Toll Free 1-877-9 6-746.

2
© 2017 Kolpin Outdoors Inc. REV 02
For additional assistance, please contact Kolpin customer ser ice
department at [phone] or [phone]
or email customerser [email protected]
C cle Countr / Universal Blade Installation:
1. Use the blade flap as a template, to drill ¼” holes into your blade. Align the flap
so that it is centered on the blade. Secure the blade with the pro ided ¼” x ¾”
bolts, washers and locknuts. Position the bolts as shown, from the underside out-
ward, with the flat washers and locknuts on top of the flap. Tighten locknuts to
where the top of the nut is e en with the end of the bolt.
2. Trim your blade flap to proper length of your blade.

3
© 2017 Kolpin Outdoors Inc. REV 02
One Year Limited Warrant
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser,
free of charge, any part or parts found upon examination by Kolpin to be defecti e in material,
workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be
borne by the purchaser. If Kolpin determines that the product must be returned to the factory for
credit, please call 1-877-956-5746 for a Return Merchandise Authorization (RMA) number and
shipping instructions.
This warranty does not apply to parts that ha e been damaged by accident, alteration, abuse,
improper maintenance, normal wear, or other causes beyond the manufacturer’s control. In order to
protect you and your ATV, certain parts of the plow system and/or hardware are designed to fail
when the equipment is o er-stressed. Parts that are lost due to loosening and improper
maintenance are not co ered under warranty. This warranty does not co er remo al or reinstallation
labor fees of the plow system and related components.
Peripheral products such as engines, electric motors, and actuators may carry an original
manufacturer’s warranty. Most hardware is general in nature and is easily obtained locally. Be sure
to replace with minimum metric class 8.8 specification.
Kolpin Outdoors, Inc.
Telephone: [phone]
Toll Free: (877)-956-5746
Fax Number: (800)-245-7569
www.kolpin.com
Email: [e-mail]