Kramer VIA Campus PLUS User manual

VIA Campus PLUS Quick Start (P/N: 2900-301035QS REV 1)
P/N:
2900- 301035QS
Rev:
1
Scan for full
manual
VIA Campus PLUS Quick Start Guide
For Installer
Thisguide helps you installand configure your VIA Campus PLUS for the first time.
Go to www.kramerav.com/downloads/VIA Campus PLUS to download the latest user
manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
VIA Campus PLUS Collaboration Device
HDMI cable extender (M to F)
1 Quick start guide
1 Power adapter (19V DC)
DVI to VGA adapter
Step 2: Get to know your VIA Campus PLUS
#
Feature
Function
1
Power Button
For turning the unit on and off.
2
USB 2.0 Connector
For upgrading firmware or connecting a USB device.
3
DC IN 19V Connector
Connects to the 19V DC power adapter.
4
USB 3.0 connectors
Connect to up to 2 USB devices.
5
DVI-I OUT Connector
Connect to a DVI display.
6
HDMI IN Connector
Connect to an HDMI source (for example, a laptop).
7
HDMI OUT Connector
Connect to an HDMI display.
8
eSATA Connector
Connect an eSATA drive to expand your storage.
9
LAN RJ-45 Connector
Connect to a wireless router or to a LAN.
10
USB 2.0 Connectors
Connect to up to 2 USB devices.
11
AUDIO LINE OUT 3.5mm Mini Jack
Connect to an unbalanced stereo audio acceptor.
12
AUDIO MIC IN 3.5mm Mini Jack
Connect to a microphone.
Step 3: Install VIA Campus PLUS
Install VIA Campus PLUS using one of the following methods:
Mount the unit in a rack using an optional RK-Campus 19” rack adapter.
Place the device on a flat surface.

Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your VIA Campus PLUS. For best results, we
recommend that you always use Kramer high-performance cables to connect AV equipment to VIA Campus PLUS.
1. Connect the keyboard and mouse.
2. Connect an HDMI display and/or a DVI display.
3. Connect a laptop or other HDMI source.
4. Connect a Local Area Network (LAN) cable for connection to your network.
OR
Use a wireless router for connecting to the device with Wi-Fi.
5. Connect powered speakers and a microphone.
Step 5: Connect the power
Connect the 19V DC power adapter to VIA Campus PLUS and plug it into the mains electricity.
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics power adapter that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See www.KramerAV.com for updated safety information.
Step 6: Configure VIA Campus PLUS
A wizard guides you through configuration. If you choose to skip the wizard, follow these steps for configuration:
1. On the Kramer VIA dashboard, click Features > Settings.
2. Enter the User Name (default = su) and Password (default = supass) and
click Login.
The VIA Settings window appears.
3. The VIA Settings tabs are:
LAN Settings –Configure your network parameters and apply
settings (DHCP is enabled by default).
System Controls –Manage your display and audio settings, run
control panel, select your language, etc.
Third Party Apps –Install/remove third party software applications.
4. When you have finished defining settings, click Reboot to apply all
settings. For more details, see the VIA Campus PLUS User Manual.

Scan for full
manual
VIA Campus PLUS Quick Start Guide
For User
This guide helps you participate in a meeting using VIA Campus PLUS.
Go to www.kramerav.com/downloads/VIA Campus PLUS to download the latest user
manual.
Step 1: Connect your personal device to the proper network
Connect your personal device to the same LAN or Wi-Fi network used by the specific VIA Campus PLUS device in your
meeting room.
Step 2: Run or Download the Kramer VIA app
For MAC or PC computer:
1. Enter the Room Name of the VIA Campus PLUS device into your computer’s browser.
The Welcome page of VIA Campus PLUS appears.
2. Select Run VIA to execute the Kramer VIA app without downloading it. (Intended for guests who are using VIA only
temporarily.)
OR
Select Install VIA to download the Kramer VIA app onto your computer. (Intended for regular users of the VIA.)
For iOS or Android devices:
Download and install the free Kramer VIA app from Apple App Store or Google Play or scan the QR code
above..
Step 3: Join the meeting
Wirelessly, using the Kramer VIA app:
1. In the Room Name field of your Kramer VIA login window, enter the room name
as it appears on the main display wallpaper (IP address of the VIA Campus
PLUS device).
2. In the Nickname field, enter a name for your device. This name appears on the
main display when you present content.
3. In the Code field, enter the 4-digit code as it appears in the lower left of the main
display (if enabled).
4. Click Login to join the meeting.
Using the HDMI IN socket:
Connect your device directly to VIA Campus PLUS using an HDMI cable.

Step 4: Using the VIA dashboard menu
Click Features to access VIA Campus PLUS features.
Click Present to present your screen to the meeting participants on the main display.
Click Participants to see who else is connected.
Step 5: VIA Campus PLUS Features
For a complete, updated list of available features go to: www.true-collaboration.com/products.html#.
Wireless Connection
Recording
Whiteboard
Powerful Content Security
Native ePolling
Chat
Mobile Mirroring
Web Browser
Enable Control
Full HD Video Streaming
Third-Party Apps
HDMI Input
Integrated YouTube Player
Digital Signage (available as an
optional license)
Windows PC Operating Platform
Do Not Disturb (DND)
View Main Display
4K Output
Customizable Features
Streaming Output
Unified Communications
VIA Pad Compatible
File Storage
Customizable Screen Layout
VIA Site Management (VSM)
File Sharing