Kramer K-Bar User manual

www.kramerAV.com
[e-mail]
User Guide
MODEL:
K-Bar
Communication Bar
P/N:
2900- 301533QS
Rev:
1
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our
Web site where updates to these installation instructions may befound.
We welcome your questions, comments, andfeedback.

2
K-Bar Communication Bar
K-Bar Communication Bar
Congratulations on purchasing your Kramer K-Bar Communication Bar. K-Bar provides a 3 in 1 compact design,
including a camera, a speaker, and a microphone. Control K-Bar via the IR remote controller.
Get to know your K-Bar
#
Feature
Function
1
Camera
High quality Camera.
2
On/OFF Push Button
Press to toggle microphone on/off.
3
AUX OUT 3.5mm Mini Jack
Connect to an audio acceptor.
4
DEVICE USB-C 2.0 Port
Connect to a computer.
5
12V, 2A Input
Connect to the power adapter.
Mounting K-Bar
You can place your K-Bar on a surface, mount it on the wall or on top of the display (using the special TV mount,
purchased separately).
To attach K-Bar onto a wall:
1. Find the correct location on the wall.
2. In the desired location, Drill 3 holes (using a
6mm drill-bit).
3. Attach the wall bracket to the wall using the 3
supplied screws.
4. Attach the device bracket to the K-Bar using
smaller size screw.
•Ensure that the environment (e.g., dust, maximum ambient temperature, humidity & air flow)is compatible
for the device.
•Avoid exposing the product to direct sunlight or any other heat source.
•Keep away from children –product includes small accessories and components.
•Avoid uneven mechanical loading.
•Do not insert any sharp objects into the product.
•Avoid dropping or hitting the product to avoid damaging the product.
•For maintenance, call tech support.

Installation Instructions
3
5. Slide the fixed device bracket onto the wall
bracket.
Connecting the K-Bar
Always switch OFF the power on each device before connecting it to your K-Bar.
Connect the power cord to the K-Bar and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
•There are no operator serviceable parts inside the unit.
Warning:
•Use only the power cord that is supplied with the unit.
•Disconnect the power and unplug the unit from the wall before installing.
•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which
located on the bottom of the unit.




4
K-Bar Communication Bar
Controlling K-Bar
You can operate K-Bar via the remote IR, or via your PC, as follows:
#
Feature
Function
1
Auto framing
Press to enable/disable auto-framing feature.
2
Mute Button
Press to turn Mic on or off.
3
Arrows Button
Press, after zooming, to move the camera
direction.
4
OK
Button
Press to restore camera image to original
settings.
5
Start Call Button
Press to start a Microsoft Teams® call.
6
End Call Button
Press to end a Microsoft Teams® call.
7
Volume Button
Press to increase/decrease volume level.
8
Zoom Button
Press zoom camera in or out.
9
Presets Button
Press and hold a number (1 or 2) to save the
current view settings (including zoom level and
viewing angle information).
Available only when camera is on, and auto-
framing is disabled.
Technical Specifications
Ports
1 USB-C 2.0
On a USB-C connector
AUX OUT
On a 3.5mm mini jack
Camera
Pixel
12M
Max. Field of View (FOV)
120° (D)
Adjustable Angle (Manual)
±15° (Up/Down)
Focus Mode
Fixed focus
Focus Distance
2m
Resolution and Frame Rate
H.264/MJPG: 3840x2160; 2560x1440; 1920x1080; 1280x720; 1024x576;
960x540; 800x600; 640x480; 640x360; 480x270; 352x288; 320x240
YUY2: 640x480; 640x360; 480x270; 352x288; 320x240
Output Format
MJPG/YUY2/H.264
Sound
Reinforcement
Sound Channel 1.0
Sound Channel 1.0
Output Power 1x8W
Output Power 1x8W
Microphone
Quantity
6
Voice Pickup Distance
Up to 8 meters
Controls
Remote control
Power
Consumption
12V DC, 1A max.
Source
12V DC, 2A
Standby Power
≤0.5W
Environmental
Conditions
Operating Temperature
0° to +40°C (32° to 104°F)
Storage Temperature
-20° to +60°C (-4° to 140°F)
Humidity
10% to 90%, RHL non-condensing
Altitude
Below 5000 meters
Regulatory
Compliance
Safety
CE, FCC
Environmental
RoHs WEEE
Enclosure
Type
Aluminum and plastic
General
Net Dimensions (W, D, H)
46cm x 9.7cm x 7.3cm (18.1" x 3.8" x 2.9")
Shipping Dimensions (W, D, H)
53cm x 16.5cm x 15.7cm (20.8" x 6.5" x 6.2")
Net Weight
1.05kg (2.3lbs) approx.
Shipping Weight
2.3kg (5.1lbs) approx.
Accessories
Included
1 USB-C cable, remote control, power cord and adapter, lens cover, wall
bracket kit, screws set
Specifications are subject to change without notice at www.kramerav.com