Lee & Plumpton Atmosphere Cantilever Crescent User manual

Part C
Minifix cover
Quantity=18
Part A
Minifix bolts M6
Quantity=18
Fittings supplied Tools required
Pozi head screw driver
Allen key (4mm)
Assembly instruction leaflet no. 59 A
Assembly steps
1. Place the top upside down.
Screw six Part A into the top
(for modesty panel attachment).
2. Screw six Part A into the
corner leg, connect to one modesty
and tighten three minifix cams.
3. Connect the second modesty to the
corner leg, and tighten three
minifix cams.
4. Lift and locate the attached modesty
panels and corner leg onto the six
Part A in the top. Do not tighten
the six minifix cams.
5. Screw six Part A into the
uprights on the two leg frames.
6. Fix the leg frames onto the desk top,
locating the three Part A on
each leg frame with the three minifix
cam holes on each modesty panel.
Tighten minifix cams to secure the
leg frames to each modesty panel.
7. Screw six Part B through the leg
frames into the top.
8. Tighten the six minifix cams in the
modesty panels.
9. Push Parts C into the appropriate
places to finish the desk.
Atmosphere Cantilever Crescent
Part B
M6 Flat head bolt
Quantity = 6
C
A
B
Leg frame
Modesty
Corner leg
Modesty
Top
Leg frame

Part C
Minifix cover
Quantity=22
Part A
Minifix bolts M6
Quantity=24
Fittings supplied Tools required
Pozi head screw driver
Nylon hammer
Assembly instruction leaflet no. 59 B
Assembly steps
1. Place the top upside down.
Screw six Part A into the top
(for modesty panel attachment).
2. Screw six Part A into the corner leg,
connect to one modesty and tighten
three minifix cams.
3. Connect the second modesty to the
corner leg, and tighten three
minifix cams.
4. Lift and locate the attached modesty
panels and corner leg onto the six
Part A in the top. Do not tighten the
six minifix cams.
5. Screw six Part A and push four
Part B into the top for slab panel
attachment. Knock two Part D
into rail ends.
6. Screw six Part A and push two
Part B into the appropriate
holes on the slabs to locate with
modesty panels.
7. To add the Slab panel, lift the
modesty slightly and locate three
Part A on one slab leg with the
appropriate holes on one end of the
modesty panel. Then lower the both
the slab and modesty panel onto the
two Part A/Part B in the top. Repeat
this process for the other slab panel.
8. Tighten the nine minifix cams in the
modesty panels and the two in
each slab panel.
9. Push Parts C into the appropriate
places to finish the desk.
Atmosphere Slab Crescent
Part B
Wood Dowels
Quantity = 8
C
A
B
Slab Modesty
Corner leg
Modesty
Slab
Top
Part D
Plain silver bung
Quantity=2
D