LSIS XP10BKA/DC User manual

XGT Panel
XGT Panel
Right choice for ultimate yield
LSIS strives to maximize customers' profit in gratitude of choosing us for your
partner.
User’s Manual
LS values every single customer.
Quality and service come first at LSIS.
Always at your service, standing for our customers.
z Read this manual carefully before
installing, wiring, operating, servicing
or inspecting this equipment.
zKeep this manual within easy reach
for quick reference.
Programmable Logic Controller
■HEAD OFFICE
Yonsei Jaedan Severance Bldg. 84-11 5 ga, Namdaemun-ro,
Jung-gu Seoul 100-753, Korea http://eng.lsis.biz
Tel. [phone]~4649 Fax.[phone]
■LS Industrial Systems Tokyo Office >> Japan
Address: 16F, Higashi-Kan, Akasaka Twin Towers 17- 22,
2-chome, Akasaka, Minato-ku, Tokyo 107-8470, Japan
Tel: [phone] Fax: [phone]
e-mail:[e-mail]
■LS Industrial Systems Dubai Rep. Office >> UAE
Address: P.O.BOX-114216, API World Tower, 303B, Sheikh
Zayed road, Dubai, UAE. e-mail: [e-mail]
Tel: [phone] Fax: [phone]
■LS-VINA Industrial Systems Co., Ltd. >> Vietnam
Address: LSIS VINA Congty che tao may dien Viet-Hung
DongAnhHanoi,Vietnam e-mail:[email protected].vn
Tel: [phone] Fax: [phone]
■LS Industrial Systems Hanoi Office >> Vietnam
Address: Room C21, 5th Floor, Horison Hotel, 40 Cat Linh,
Hanoi, Vietnam
Tel: [phone] Fax: [phone]
■Dalian LS Industrial Systems co., Ltd, >> China
Address: No. 15 Liaohexi 3 Road, economic and technical
development zone, Dalian, China e-mail: [e-mail]
Tel: [phone] Fax: [phone]
■LS Industrial Systems (Shanghai) Co., Ltd. >> China
Address: Room E-G, 12th Floor Huamin Empire Plaza,
No. 726, West Yan’an Road, Shanghai, China
Tel: [phone]
■LS Industrial Systems(Wuxi) Co., Ltd. >> China
Address: 102-A National High & New Tech Industrial
Development Area, Wuxi, Jiangsu, China e-mail: [email protected]
Tel: [phone] Fax: [phone]
■LS Industrial Systems Beijing Office >> China
Address: B-tower 17th Floor, Beijing Global Trade Center building,
No. 36, BeiSanHuanDong-Lu, DongCheng-District, Beijing, China
Tel: [phone]
■LS Industrial Systems Guangzhou Office >> China
Address: Room 1403, 14F, New Poly Tower, 2 Zhongshan Liu
Rad, Guangzhou, China e-mail: [e-mail]
Tel: [phone] Fax: [phone]
■LS Industrial Systems Chengdu Office >> China
Address: Room 2907, Zhong Yin B/D, No. 35, Renminzhong(2)-
Road, Chengdu, China e-mail: [email protected]m
Tel: [phone] Fax: [phone]
■LS Industrial Systems Qingdao Office >> China
Address: 12th Floor, Guodong building, No52 Jindun Road,
Chengdu,China e-mail:[e-mail]
Tel: [phone] Fax: [phone]
10310000924
XGT Panel
/
200
7
.
0
9
※ LS Industrial Systems constantly endeavors to improve its product so that
Information in this manual is subject to change without notice.
ⓒ LS Industrial systems Co., Ltd 2007 All Rights Reserved.
XGT Series
XGT Panel
XP10BKA/DC
XP10BKB/DC

Revision History
2
Revision History
Version Data Remark Page
V 1.0 ’05.03 First Edition -
V 2.1 ’08.02 1. Adding contents
(1) Communication system configuration
example 4-1 ~ 4-5
(2) Panel Editor function setting and example 6-11, 6-16
(3) Function reference display 6-12
(4) Function limit factor 6-16
(5) Function operation description 7-1
(6) Supported communication driver 8
(7) Connectable PLC module 8-3,8-8
(8) XGK series communication driver 8-17~8-18
(9) Installation method 9-1
(10) Adding cable specification 9-2
(11) Adding troubleshooting App.3
2. Fixing contents
(1) Precaution -
(2) General specification name 3-2
(3) Company logo and name (LG->LS)
4-1~4-5, 5-2,
6-5, 6-9,
8-2~8-16,
app2
(4) Indicating area at Panel Editor screen 6-1
(5) Product specification (Operating temperature,
humidity) 9-1,10-1,10-3
※The number of User’s manual is indicated right part of the back cover.
ⓒLS Industrial Systems Co., Ltd 2007 All Rights Reserved.

About User’s Manual
7
About User’s Manual
Congratulations on purchasing HMI of LS Industrial System Co., Ltd.
Before use, make sure to carefully read and understand the User’s Manual about the functions,
performances, installation and programming of the product you purchased in order for correct
use and importantly, let the end user and maintenance administrator to be provided with the
User’s Manual.
The User’s Manual describes the product. If necessary, you may refer to the following
description and order accordingly. In addition, you may connect our website(http://eng.lsis.biz/)
and download the information as a PDF file.

◎ Contents ◎
Chapter 1. General
1.1 Guide to Use This Manual·······················································1 - 1
1.2 Features·················································································1 – 2
1.2.1 Features of XGT Panel ······································································1 - 2
Chapter 2. Names of Parts
2.1 Names of Parts and Description ·············································2 - 1
Chapter 3. General Specifications
3.1 General Specifications ··························································3 - 1
3.2 Performance Specifications ···················································3 - 2
Chapter 4. System Configurations
4.1 1:1 Configuration·····································································4 - 1
4.2 1:N Configuration ··································································4 - 3
4.3 N:1 Configuration································································ 4 - 7
4.4 N:M Configuration·································································4 - 10
4.5 Slave Configuration·······························································4 - 13
Chapter 5. Panel Editor Installation
5.1 System Requirements·····························································5 - 1
5.2 Panel Editor Installation ··························································5 - 2
5.2.1 Panel Editor Installation Procedure ·······················································5 - 2
Chapter 6. Panel Editor
6.1 Main Screen of Panel Editor ···················································6 - 1
6.1.1 Project Window······················································································6 - 2
6.1.2 Screen Edit Window···············································································6 - 3
6.1.3 Toolbar ···································································································6 - 4
6.1.4 Menu······································································································6 - 4
6.2 Project Window·······································································6 - 5
6.2.1 Project Window Tree··············································································6 - 5
6.2.2 Edit Project Window···············································································6 - 5
6.3 Screen Edit Window································································6 - 8
6.3.1 Screen Edit Window···············································································6 - 8

6.4 Menu & Toolbar·····································································6 - 12
6.4.1 Menus ··································································································6 - 12
6.4.2 Toolbar ·································································································6 - 15
6.5 Project Menu·········································································6 - 18
6.5.1 New Project··························································································6 - 18
6.5.2 Open Project························································································6 - 27
6.5.3 Save Project·························································································6 - 27
6.5.4 Save As································································································6 - 27
6.5.5 Change PLC Type················································································6 - 27
6.5.6 Change COM Port ···············································································6 - 28
6.5.7 Print······································································································6 - 28
6.5.8 Print Preview························································································6 - 29
6.5.9 Recent File···························································································6 - 29
6.5.10 Exit·····································································································6 - 29
6.6 Edit Menu··············································································6 - 30
6.6.1 Cut········································································································6 - 30
6.6.2 Copy·····································································································6 - 30
6.6.3 Paste····································································································6 - 30
6.6.4 Delete···································································································6 - 30
6.6.5 Order····································································································6 - 30
6.6.6 Align / Space ························································································6 - 31
6.6.7 Grid & Snap ·························································································6 - 34
6.6.8 Select All ······························································································6 - 35
6.6.9 Lock Tag·······························································································6 - 35
6.6.10 Unlock Tag ·························································································6 - 35
6.6.11 Pop-up Menu·····················································································6 – 35
6.7 View Menu············································································6 - 36
6.7.1 Status Bar·····························································································6 - 36
6.7.2 Memory Usage·····················································································6 - 36
6.7.3 System Memory Usage········································································6 - 37
6.7.4 Zoom Box·····························································································6 - 37
6.8 Screen Menu·········································································6 - 38
6.8.1 New Screen ·························································································6 - 38
6.8.2 Delete Screen ······················································································6 - 38
6.8.3 Screen Property···················································································6 - 39
6.8.4 Tag List·································································································6 - 39
6.8.5 Function Key List ·················································································6 - 40

6.9 Tag Menu··············································································6 - 41
6.9.1 Numeric Tag·························································································6 - 41
6.9.2 Message Tag························································································6 - 49
6.9.3 Button Tag····························································································6 - 52
6.9.4 Lamp Tag ·····························································································6 - 55
6.9.5 Bar Graph Tag······················································································6 - 56
6.9.6 Trend Graph Tag··················································································6 - 58
6.9.7 Pie Graph Tag······················································································6 - 60
6.9.8 Rotation Tag·························································································6 - 64
6.9.9 Move Tag······························································································6 - 66
6.9.10 Clock Tag ··························································································6 – 68
6.10 Draw Menu··········································································6 - 70
6.10.1 Selection ····························································································6 - 70
6.10.2 Text····································································································6 – 70
6.10.3 Image Text··························································································6 - 71
6.10.4 Image·································································································6 - 73
6.10.5 Line ····································································································6 - 74
6.10.6 Rect····································································································6 - 75
6.10.7 Circle··································································································6 - 76
6.11 Common Resource Menu ···················································6 - 77
6.11.1 Message·····························································································6 - 77
6.11.2 Image ·································································································6 - 77
6.11.3 Parameter···························································································6 - 78
6.11.4 Alarm··································································································6 - 79
6.11.5 Calculation··························································································6 - 81
6.11.6 Block Communication ········································································6 - 83
6.11.7 Reservation························································································6 - 85
6.12 Communication Menu·························································6 - 89
6.12.1 Wiring with PC ···················································································6 - 90
6.12.2 Download / Upload·············································································6 - 90
6.12.3 Font····································································································6 - 92
6.12.4 Data / Time·························································································6 - 92
6.12.5 Password ···························································································6 - 93
6.12.6 Clear Password··················································································6 - 93
6.12.7 Entire Memory Format·······································································6 - 94
6.12.8 O/S Download····················································································6 - 94
6.12.9 Read Alarm History············································································6 - 96
6.12.10 Delete Alarm History········································································6 - 99
6.12.11 Read System Information·································································6 - 99

6.13 Tools··················································································6 - 100
6.13.1 Customize Toolbars ·········································································6 - 100
6.13.2 Customize Shortcut Keys·································································6 - 103
6.13.3 Option·······························································································6 - 104
6.14 Window·············································································6 - 105
6.14.1 Cascade Mode·················································································6 - 105
6.14.2 Tile Mode ·························································································6 - 106
6.14.3 Arrange Icons···················································································6 - 106
6.14.4 Close All···························································································6 - 106
6.15 Help ··················································································6 - 107
6.15.1 About Panel Editor···········································································6 - 107
6.16 Function Key Settings·······················································6 - 108
6.16.1 None·································································································6 - 109
6.16.2 Bit·····································································································6 - 109
6.16.3 Drive out···························································································6 - 110
6.16.4 Increment·························································································6 - 112
6.16.5 Decrement ·······················································································6 - 113
6.16.6 Screen····························································································· 6 – 114
Chapter 7. XGT Panel Function
7.1 Key Operation·········································································7 - 1
7.1.1 Operation Mode·····················································································7 - 1
7.1.2 Screen Change Mode············································································7 - 1
7.1.3 Alarm History Mode················································································7 - 2
7.1.4 XGT Panel System Menu Mode ····························································7 - 4
7.2 Operation Mode····································································7 - 10
7.2.1 Monitoring mode··················································································7 - 10
7.2.2 Key·······································································································7 - 11
7.3 Changing Screen··································································7 - 12
7.3.1 By Function Keys·················································································7 - 12
7.3.2 From the Screen List············································································7 - 12
7.3.3 Bu Screen Saver··················································································7 - 12
7.3.4 By Online Screen Change ···································································7 - 12
7.4 Alarm·····················································································7 - 13
7.4.1 Alarm Message····················································································7 - 13
7.4.2 Alarm Buzzer························································································7 - 13
7.4.3 Alarm History························································································7 - 13
7.5 Buzzer···················································································7 - 14
7.5.1 Buzzer Operation·················································································7 - 14
7.6 System Memory···································································7 – 14

Chapter 8. Communication
8.1 Drive Download······································································8 – 2
8.2 LS MASTER-K Series Loader Protocol··································8 – 3
8.2.1 Communication Mode············································································8 - 3
8.2.2 Connection Available Device ·································································8 - 3
8.2.3 Connection Diagram··············································································8 - 4
8.3 LS MASTER-K Series : Dedicated Protocol···························8 – 5
8.3.1 Communication Mode············································································8 - 5
8.3.2 Connection Available Device ·································································8 - 6
8.3.3 Connection Diagram··············································································8 - 6
8.4 LS MASTER-K 10S1 : Dedicated Protocol ····························8 – 8
8.4.1 Communication Mode············································································8 - 8
8.4.2 Connection Available Device ·································································8 - 8
8.4.3 Connection Diagram··············································································8 - 9
8.5 LS MASTER-K Series : Dedicated Protocol·························8 – 10
8.5.1 Communication Mode··········································································8 - 10
8.5.2 Connection Available Device ·······························································8 - 10
8.5.3 Connection Diagram············································································8 - 11
8.6 LS MASTER-K 500H/1000H : Dedicated Protocol···············8 – 12
8.6.1 Communication Mode··········································································8 - 12
8.6.2 Connection Available Device ·······························································8 - 12
8.6.3 Connection Diagram············································································8 - 13
8.7 LS GLOFA GM Series : Loader Protocol······························8 – 14
8.7.1 Communication Mode··········································································8 - 14
8.7.2 Connection Available Device ·······························································8 - 14
8.7.3 Connection Diagram············································································8 - 15
8.8 LS GLOFA GM Series : Dedicated Protocol·························8 – 16
8.8.1 Communication Mode··········································································8 - 16
8.8.2 Connection Available Device ·······························································8 - 17
8.8.3 Connection Diagram············································································8 - 18
8.9 LS Inverter : Dedicated Protocol··········································8 – 19
8.9.1 Communication Mode··········································································8 - 19
8.9.2 Connection Available Device ·······························································8 - 19
8.9.3 Connection Diagram············································································8 - 20

8.10 MODBUS Protocol·····························································8 – 21
8.10.1 Communication Mode········································································8 - 21
8.10.2 Connection Available Device·····························································8 - 21
8.10.3 Connection Diagram··········································································8 - 22
8.11 Mitsubishi Melsec FX Series : Link Protocol·······················8 – 23
8.11.1 Communication Mode········································································8 - 23
8.11.2 Connection Available Device······························································8 - 23
8.11.3 Connection Diagram ··········································································8 - 24
8.12 OMRON CPM : C-Mode Protocol ······································8 – 25
8.12.1 Communication Mode········································································8 - 25
8.12.2 Connection Available Device·····························································8 - 25
8.12.3 Connection Diagram··········································································8 - 26
8.13 Koyo Direct Logic 06 : DirectNet········································8 – 27
8.13.1 Communication Mode········································································8 - 27
8.13.2 Connection Available Device·····························································8 - 27
8.13.3 Connection Diagram··········································································8 - 28
8.14 NAIS FP Series : Mewtocol················································8 – 29
8.14.1 Communication Mode········································································8 - 29
8.14.2 Connection Available Device·····························································8 - 29
8.14.3 Connection Diagram··········································································8 - 30
8.15 Siemens S7-200 Series : PPI Protocol ······························8 – 31
8.15.1 Communication Mode········································································8 - 31
8.15.2 Connection Available Device·····························································8 - 31
8.15.3 Connection Diagram··········································································8 - 32
8.16 Fuji Inverter FVR-E11S······················································8 – 33
8.16.1 Communication Mode········································································8 - 33
8.16.2 Connection Available Device·····························································8 - 33
8.16.3 Connection Diagram·········································································8 – 34
8.17 LS XGK Series Loader Protocol·········································8 – 35
8.17.1 Communication Mode········································································8 - 35
8.17.2 Connection Available Device·····························································8 - 35
8.17.3 Connection Diagram··········································································8 - 36
8.18 LS XGK Series: Dedicated Protocol···································8 – 37
8.18.1 Communication Mode········································································8 - 37
8.18.2 Connection Available Device·····························································8 - 37
8.18.3 Connection Diagram··········································································8 - 38

Chapter 9. Installation and Wiring
9.1 Installation··············································································9 – 1
9.1.1 Installation Environment······································································· 9 - 1
9.1.2 Handling Instructions ·············································································9 - 3
9.2 Wiring·····················································································9 – 5
9.2.1 Power Supply Wiring··············································································9 - 5
9.2.2 Cable Specifications for Wiring······························································9 - 6
Chapter 10. Maintenance
10.1 Maintenance and Inspection··············································10 – 1
10.2 Daily Inspection··································································10 – 1
10.3 Periodic Inspection·····························································10 – 2
Appendix
Appendix 1 System Memory······················································ App-1
Appendix 2 Dimension······························································· App-3
Appendix 2.1 External Dimension································································ App-3
Appendix 2.2 Cutting Dimension·································································· App-3

Safety Instructions
Before using the product …
For your safety and effective operation, please read the safety instructions
thoroughly before using the product. Safety Instructions should always be
observed in order to prevent accident or risk with the safe and proper use the
product.
Instructions are divided into “Warning” and “Caution”, and the meaning of the
terms is as follows.
This symbol indicates the possibility of serious injury
or death if some applicable instruction is violated
This symbol indicates the possibility of severe or
slight injury, and property damages if some
applicable instruction is violated
Moreover, even classified events under its caution category may develop
into serious accidents relying on situations. Therefore we strongly advise users
to observe all precautions properly just like warnings.
The marks displayed on the product and in the user’s manual have the
following meanings.
Be careful! Danger may be expected.
Be careful! Electric shock may occur.
The user’s manual even after read shall be kept available and accessible to
any user of the product.
Warning
Caution

Safety Instructions
Safety Instructions for design process
Safety Instructions for design process
1. Please install a protection circuit on the exterior of HMI so that the
whole system may operate safely regardless of failures from
external power or HMI. Any abnormal output or operation from HMI
may cause serious problems to safety in whole system.
(1) Install protection units on the exterior of HMI like emergency stop,
protection circuit.
2. Never let the external power of the output circuit to be on earlier
than HMI power, which may cause accidents from abnormal output or
operation.
3. Please install Read specific instructions thoroughly when
exchange data with PLC or modify operation modes using a
computer or other external equipments
Warning
I/O signal or communication line shall be wired at least 100mm
away from a high-voltage cable or power line. Fail to follow this
instruction may cause malfunctions from noise
Caution

Safety Instructions
Safety Instructions on installation process
1. Use HMI only in the environment specified in HMI manual or
general standard of data sheet. If not, electric shock, fire,
abnormal operation of the product may be caused.
2. Before install or remove the module, be sure HMI power is off.
If not, electric shock or damage on the product may be caused.
3. Be sure that HMI is securely attached after adding a module or
an extension connector. If the product is installed loosely or
incorrectly, abnormal operation, error or dropping may be caused.
In addition, contact failures under poor cable installation will be
causing malfunctions as well.
4. Be sure that screws get tighten securely under vibrating
environments. Fail to do so will put the product under direct
vibrations which will cause electric shock, fire and abnormal
operation.
5. Do not come in contact with conducting parts in HMI, which
may cause electric shock, malfunctions or abnormal operation.
Caution

Safety Instructions
Safety Instructions for wiring process
1. Prior to wiring works, make sure that every power is turned off.
If not, electric shock or damage on the product may be caused.
Warning
1. Check rated voltages and terminal arrangements in each
product prior to its wiring process. Applying incorrect voltages
other than rated voltages and misarrangement among terminals
may cause fire or malfunctions.
2. Secure terminal screws tightly applying with specified torque. If
the screws get loose, short circuit, fire or abnormal operation may be
caused. Securing screws too tightly will cause damages to the
module or malfunctions, short circuit, and dropping.
3. Be sure to earth to the ground using Class 3 wires for FG
terminals which is exclusively used for HMI. If the terminals not
grounded correctly, abnormal operation or electric shock may be
caused.
4. Don’t let any foreign materials such as wiring waste inside the
HMI while wiring, which may cause fire, damage on the product or
abnormal operation.
5. Make sure that pressed terminals get tighten following the
specified torque. External connector type shall be pressed or
soldered using proper equipments.
Caution

Safety Instructions
Safety Instructions for test-operation and
maintenance
Safety Instructions for waste disposal
1. Don’t touch the terminal when powered. Electric shock or
abnormal operation may occur.
2. Prior to cleaning or tightening the terminal screws, let all the
external power off. If not, electric shock or abnormal operation
may occur.
Warning
1. Do not make modifications or disassemble each module. Fire,
electric shock or abnormal operation may occur.
2. Prior to installing or disassembling the module, let all the
external power off including PLC power. If not, electric shock or
abnormal operation may occur.
3. Keep any wireless equipment such as walkie-talkie or cell
phones at least 30cm away from HMI. If not, abnormal operation
may be caused.
4. When exchanging batteries, contact our custom service center or
dealer
Caution
 Product or battery waste shall be processed as industrial waste.
The waste may discharge toxic materials or explode itself.
Caution

Chapter 1. General
1-1
Chapter 1. General
1.1 Guide to Use This Manual
This manual includes specifications, functions and handling instructions for the XGT Panel.
This manual is divided up into chapters as follows:
No. Title Contents
Chapter 1 General Describes configuration of this manual and unit's features.
Chapter 2 Names of Parts Describes each kind of manufacturing goods, titles, and main functions.
Chapter 3 General Specifications Describes general specifications of the XGT Panel.
Chapter 4 System Configuration Describes system configurations in the XGT Panel.
Chapter 5 Panel Editor Installation Describes installation of Panel Editor.
Chapter 6 Panel Editor Describes function of Panel Editor.
Chapter 7 XGT Panel Function Describes function of XGT Panel.
Chapter 8 Communication driver Describes communication protocols.
Chapter 9 Installation and wiring Describes wiring and precaution for reliability
Chapter 10 Maintenance Describes check list and method for long use of XGT Panel
Appendix 1 Internal Memory Describes internal memory.
Appendix 2 Dimensions Shows dimensions of XGT Panel.
Appendix3 Troubleshooting Describesmeasurewhen errorccurs
1) Communication driver can be added without notice. Refer to our home page.
REMARK

Chapter 1. General
1-2
1.2. Features
1.2.1 Features of XGT Panel
(1) Increased application design flexibility through wide graphic LCD (192× 64 dot)
(2) Slim design which considers a user's convenience
(3) Supports two communication channels independently (RS-232C, RS-422/485),
(supporting N:M communication)
(4) Built-in 512K bytes Flash-Memory
(5) O/S and font download system for an upgrade
(6) Provides various tags and drawing functions
(7) Supports multi-languages: Korean, English, Chinese, Russian and others will be provided hereafter
(8) Provides Window-based monitoring software (Panel Editor)
(9) Provides 1000 words of system memory area
(10) 2 kinds of power supply:
- You can connect the external 24VDC through a power supply terminal.
- The 5VDC power can be supplied directly through a communication port (RS-232C)
(Available on LS PLC)
(11) Supports very high communication speed (maximum of 115,200 bps, HEX communication)
– Improved up/download speed
(12) Provides user defined function keys for each screen: F1~F4, , , , 
(13) Provides built-in RTC function (available on XP10KB/DC only)
(14) Each memory area can be up/downloaded in part
(15) Supports two kinds of password (for up · downloading/ data writing)
(16) Supports user defined bitmap input function
(17) Supports bitmap text in various fonts and sizes
(18) Provides various communication drivers

Chapter 2. Names of Parts
2-1
Chapter 2. Names of Parts
2.1 Names of Parts and Description
No Names Description Remark
1 Power supply connector Supplies power to the XGT Panel. 24VDC
2 O/S download switch Switch for OS downloading
Place the switch to the ‘RUN’position. Default: RUN
3 Variable resistance for
brightness control Adjusts the brightness of the XGT Panel.
4 RS-422/485 connector Connects to the RS-422/485.
5 RS-232C connector Connects to the RS-232C. DC 5V
① ② ③ ④ ⑤

Chapter 3. General Specifications
3-1
Chapter 3. General Specifications
3.1 General Specifications
The following table shows the general specifications of the XGT Panel.
No. Item Specifications References
1 Operating ambient
temperature 0 ~ 50 °C
2 Storage ambient
temperature −20 ~ +60 °C
3 Operating ambient
humidity 5 ~ 85%RH, non-condensing
4 Storage ambient
humidity 5 ~ 85%RH, non-condensing
Occasional vibration -
Frequency Acceleration Amplitude Sweep count
10 ≤f <57Hz −0.075mm
57 ≤f ≤150Hz 9.8m/s2{1G} −
Continuous vibration
Frequency Acceleration Amplitude
10 ≤f <57Hz −0.0375mm
5 Vibrations
57 ≤f ≤150Hz 4.9m/s2{0.5G} −
10 times for each
X, Y, Z axis
IEC 61131-2
6 Shocks
•Maximum shock acceleration: 147 m/s2{15G}
•Duration time: 11ms
•Pulse wave: half sine pulse (3 shocks per axis, on X, Y, Z axis)
IEC 61131-2
Square wave
Impulse noise ±500 V LSIS’ Standard
Electronic
discharge Voltage: 4 kV (Discharge by contact) IEC 61131-2,
IEC 61000-4-2
Radiated
electromagnetic
field noise
27 ~ 500 MHz, 10 V/m IEC 61131-2,
IEC 61000-4-3
7 Noise immunity
Fast transient &
Burst noise Voltage
1kV
/ 0.25kV
IEC 61131-2
IEC 61000-4-4
8 Atmosphere Free of corrosive gases and excessive dust
9 Altitude Up to 2,000m
10 Pollution degree Less than 2
11 Cooling method Air-cooling
REMARK
1) IEC (International Electro-technical Commission): An international civilian institute who establishes international standards in electronics.
2) Pollution degree: An indicator which determines the insulation performance of the equipment.
* Pollution degree 2: Normally, only non-conductive pollution occurs. Occasionally however, a temporary conductivity caused by condensation mat be
expected

Chapter 3. General Specifications
3-2
3.2 Performance Specifications
The following table shows the performance specifications of the XGT Panel
Specifications
Item XP10BKA/DC XP10BKB/DC References
Screen Size 4.1”
Screen resolution 192 x 64
5VDC DC 4.9 ~ 5.1V (RS-232C port)
24VDC DC 21.6 ~ 26.4V (DC Power Input connector)
Input
voltage Consumption
current Less than 200mA (24VDC)
Display LED back-light (192 x 64 Dots)
Communication interface RS-232C, RS-422/485 Can be used
independently
Flash memory 256K bytes
Language Default: English, Can be switched to Korean/Chinese/Russian
RTC None Supports
Download specification 115,200bps (memory division download method per each part)
Keys 12 Keys (F1~F4, ESC, ALM, ▲, ▼,◀,▶, SET, ENT)
System area S000 ~ S899 (900 Word)
Latch area setting
available for
XP10BKB/DC type
System
memory
System flag S900 ~ S999 (100 Word)
Standard certification UL/CE
Dimension(mm) 150 x 93 x 35
Panel cut(mm) 141 x 87
Mass(kg) 0.4