MacDon M105 2011 User manual

M105
Self-
Propelled Windrower
OPERATOR’S MANUAL
Part #169552 Rev. A
$25

This Manual contains instructions for “SAFETY”, “OPERATION”, and “MAINTENANCE/SERVICE” for your new MacDon
Model M105 Self-Propelled Windrower.
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its constituents are known
to the State of California to cause cancer, birth defects, and
other reproductive harm.

Form 169552 / 169554 / 169555 1Revision A
1 INTRODUCTION
This manual contains information on the Model M105 Self-Propelled Windrower that is designed to cut and lay in
windrows, a wide variety of grain, hay and specialty crops. Windrowing allows starting the harvest earlier,
protects the crop from wind damage, and gives you more flexibility in scheduling combine time.
The power unit (referred to in this manual as the “windrower”), when coupled with one of the specially designed
auger or draper headers, provides a package that incorporates many features and improvements in design.
This manual must be used in conjunction with your Header Operator's Manual.
CAREFULLY READ ALL THE MATERIAL PROVIDED BEFORE ATTEMPTING TO UNLOAD, ASSEMBLE, OR
USE THE MACHINE.
Use this manual as your first source of information about the machine. If you follow the instructions given in this
manual, your M105 windrower will work well for many years.
If you require more detailed service information, check with your MacDon Dealer.
Use the Table of Contents and the Index to guide you to specific areas. Study the Table of Contents to familiarize
yourself with how the material is organized.
Keep this manual handy for frequent reference, and to pass on to new Operators or Owners. A manual storage
case is provided in the cab.
Contact your Dealer if you need assistance, information, or additional copies of this manual.
Published: July, 2011

Form 169552 / 169554 / 169555 2Revision A
2 MODEL AND SERIAL NUMBER
Record the Model Number, Serial Number, and Model Year of the Windrower and Engine on the lines below:
WINDROWER SERIAL NO._________________YEAR______
Serial Number Plate is located on the left side of the main
frame near the walking beam.
ENGINE SERIAL NO._____________________YEAR_______
Serial Number Plate is located on the top face of the engine
cylinder head cover.

TABLE OF CONTENTS
Section/Title Page
Form 169552 / 169554 / 169555 3Revision A
1INTRODUCTION ....................................................................................................................................1
2MODEL AND SERIAL NUMBER...........................................................................................................2
3SAFETY .................................................................................................................................................7
3.1 SAFETY ALERT SYMBOL ............................................................................................................7
3.2 SIGNAL WORDS...........................................................................................................................7
3.3 SAFETY SIGNS.............................................................................................................................7
3.3.1 Safety Sign Installation .............................................................................................................................7
3.3.2 Safety Sign Locations ...............................................................................................................................7
3.4 GENERAL SAFETY.....................................................................................................................12
4DESCRIPTION .....................................................................................................................................14
4.1 DEFINITIONS ..............................................................................................................................14
4.2 SPECIFICATIONS.......................................................................................................................15
4.3 WINDROWER DIMENSIONS......................................................................................................17
4.4 COMPONENT IDENTIFICATION................................................................................................19
5OPERATOR’S STATION.....................................................................................................................20
5.1 OPERATOR CONSOLE ..............................................................................................................20
5.2 SEAT ADJUSTMENTS................................................................................................................20
5.3 TRAINING SEAT (Optional) ........................................................................................................21
5.4 SEAT BELTS ...............................................................................................................................21
5.5 STEERING COLUMN ADJUSTMENT ........................................................................................21
5.6 OPERATOR PRESENCE............................................................................................................22
5.6.1 Header Drive...........................................................................................................................................22
5.6.2 Transmission ..........................................................................................................................................22
5.6.3 Engine.....................................................................................................................................................22
5.7 LIGHTS........................................................................................................................................23
5.7.1 Field Lighting ..........................................................................................................................................23
5.7.2 Road Lighting..........................................................................................................................................24
5.7.3 Beacon Lighting: Export (N.A. Optional) .................................................................................................24
5.8 WINDSHIELD WIPER .................................................................................................................25
5.9 REAR VIEW MIRRORS...............................................................................................................25
5.10 CAB TEMPERATURE .................................................................................................................26
5.10.1 Controls ..................................................................................................................................................26
5.10.2 Air Distribution.........................................................................................................................................26
5.10.3 Heater Shut-Off Valve.............................................................................................................................26
5.10.4 A/C Compressor Protection ....................................................................................................................27
5.11 INTERIOR LIGHTS......................................................................................................................27
5.12 OPERATOR AMENITIES ............................................................................................................27
5.13 RADIOS .......................................................................................................................................28
5.13.1 AM/FM Radio..........................................................................................................................................28
5.13.2 Antenna Mounting...................................................................................................................................28
5.14 HORN ..........................................................................................................................................28
5.15 ENGINE CONTROLS ..................................................................................................................29
5.16 WINDROWER CONTROLS ........................................................................................................30
5.17 HEADER CONTROLS.................................................................................................................31
5.17.1 Header Drive Switch ...............................................................................................................................31
5.17.2 Deck Shift ...............................................................................................................................................31
5.17.3 GSL Header Switches.............................................................................................................................31
5.18 CAB DISPLAY MODULE (CDM) .................................................................................................33
5.18.1 Engine and Windrower Functions ...........................................................................................................33
5.18.2 Header Functions....................................................................................................................................33

TABLE OF CONTENTS
Section/Title Page
Form 169552 / 169554 / 169555 4Revision A
5.18.3 Operating Screens ................................................................................................................................. 34
5.18.4 Cab Display Module (CDM) Warnings/Alarms ....................................................................................... 39
5.18.5 Cab Display Module (CDM) Programming ............................................................................................. 42
5.18.6 Setting Guidelines .................................................................................................................................. 48
5.18.7 Engine Error Codes................................................................................................................................ 48
5.18.8 CDM and WCM Fault Codes.................................................................................................................. 48
6OPERATION ........................................................................................................................................49
6.1 OWNER/OPERATOR RESPONSIBILITIES................................................................................49
6.2 SYMBOL DEFINITIONS ..............................................................................................................49
6.2.1 Engine Functions ................................................................................................................................... 49
6.2.2 Windrower Operating Symbols............................................................................................................... 50
6.2.3 Header Functions................................................................................................................................... 50
6.3 WINDROWER OPERATION .......................................................................................................51
6.3.1 Operational Safety ................................................................................................................................. 51
6.3.2 Break-In Period ...................................................................................................................................... 51
6.3.3 Pre-Season Check ................................................................................................................................. 52
6.3.4 Daily Check ............................................................................................................................................ 52
6.3.5 Engine Operation ................................................................................................................................... 53
6.3.6 Driving The Windrower........................................................................................................................... 57
6.3.7 Adjustable Caster Tread Width .............................................................................................................. 61
6.3.8 Transporting ........................................................................................................................................... 63
6.3.9 Towing the Windrower ........................................................................................................................... 72
6.3.10 Storage................................................................................................................................................... 73
6.4 HEADER OPERATION................................................................................................................74
6.4.1 Header Lift Cylinder Stops ..................................................................................................................... 74
6.4.2 Header Flotation..................................................................................................................................... 75
6.4.3 Levelling ................................................................................................................................................. 77
6.4.4 Header Drive .......................................................................................................................................... 78
6.4.5 Header Angle ......................................................................................................................................... 78
6.4.6 Cutting Height ........................................................................................................................................ 80
6.4.7 Swath Roller Operation .......................................................................................................................... 81
6.5 D SERIES HEADER OPERATION..............................................................................................82
6.5.1 Header Attachment ...................................................................................Error! Bookmark not defined.
6.5.2 Header Detachment ..................................................................................Error! Bookmark not defined.
6.5.3 Header Position...................................................................................................................................... 89
6.5.4 Reel Fore-Aft Position ............................................................................................................................ 89
6.5.5 Reel Height ............................................................................................................................................ 89
6.5.6 Reel Speed ............................................................................................................................................ 90
6.5.7 Draper Speed......................................................................................................................................... 92
6.5.8 Knife Speed............................................................................................................................................ 94
6.5.9 Deck Shift (Optional) .............................................................................................................................. 95
6.6 A SERIES HEADER OPERATION ..............................................................................................99
6.6.1 Header Attachment ................................................................................................................................ 99
6.6.2 Header Detachment ............................................................................................................................. 102
6.6.3 Auger Speed ........................................................................................................................................ 104
6.6.4 Reel Speed .......................................................................................................................................... 105
6.6.5 Knife Speed.......................................................................................................................................... 106
7MAINTENANCE AND SERVICING ...................................................................................................108
7.1 PREPARATION FOR SERVICING............................................................................................108
7.1.1 Welding Precautions ............................................................................................................................ 108
7.2 RECOMMENDED SAFETY PROCEDURES ............................................................................108
7.3 MAINTENANCE SPECIFICATIONS..........................................................................................110
7.3.1 Recommended Torques....................................................................................................................... 110
7.3.2 Recommended Fuel, Fluids And Lubricants......................................................................................... 113
7.3.3 Conversion Chart ................................................................................................................................. 114

TABLE OF CONTENTS
Section/Title Page
Form 169552 / 169554 / 169555 5Revision A
7.4 ENGINE COMPARTMENT HOOD............................................................................................115
7.5 MAINTENANCE PLATFORM ....................................................................................................116
7.5.1 Opening/Closing Platform .....................................................................................................................116
7.5.2 Opening/Closing Platform for Major Servicing ......................................................................................116
7.6 LUBRICATING THE WINDROWER..........................................................................................117
7.6.1 Procedure .............................................................................................................................................117
7.6.2 Lubrication Points .................................................................................................................................117
7.7 OPERATOR’S STATION...........................................................................................................119
7.7.1 Seat Belts .............................................................................................................................................119
7.7.2 Safety Systems .....................................................................................................................................119
7.7.3 GSL Adjustments ..................................................................................................................................120
7.7.4 Steering Adjustments............................................................................................................................122
7.7.5 Neutral Start Switch ..............................................................................................................................123
7.7.6 HVAC System .......................................................................................................................................124
7.8 ENGINE .....................................................................................................................................127
7.8.1 General Engine Inspection....................................................................................................................127
7.8.2 Manually Turning Engine ......................................................................................................................127
7.8.3 Oil Level ................................................................................................................................................128
7.8.4 Changing Oil and Oil Filter....................................................................................................................129
7.8.5 Air Intake System..................................................................................................................................130
7.8.6 Fuel System..........................................................................................................................................133
7.8.7 Engine Cooling System.........................................................................................................................137
7.8.8 Gearbox ................................................................................................................................................140
7.8.9 Exhaust System ....................................................................................................................................142
7.8.10 Belts......................................................................................................................................................143
7.8.11 Engine Speed .......................................................................................................................................144
7.9 COOLING BOX..........................................................................................................................145
7.9.1 Cooling Box Screen ..............................................................................................................................145
7.9.2 Rotor To Screen Clearance ..................................................................................................................146
7.9.3 Cooling Box Maintenance .....................................................................................................................147
7.10 ELECTRICAL SYSTEM.............................................................................................................150
7.10.1 Batteries................................................................................................................................................150
7.10.2 Headlights.............................................................................................................................................156
7.10.3 Field Lights: Forward ...........................................................................................................................157
7.10.4 Flood Lights: Forward ...........................................................................................................................158
7.10.5 Flood Lights: Rear.................................................................................................................................159
7.10.6 Swath Lights .........................................................................................................................................160
7.10.7 Amber Lights.........................................................................................................................................161
7.10.8 Beacons (If Installed) ............................................................................................................................161
7.10.9 Dome Light ...........................................................................................................................................163
7.10.10 Ambient Light........................................................................................................................................163
7.10.11 Turn Signal Indicators ...........................................................................................................................163
7.10.12 Circuit Breakers and Fuses...................................................................................................................164
7.11 HYDRAULIC SYSTEM ..............................................................................................................167
7.11.1 Oil Level ................................................................................................................................................167
7.11.2 Changing Hydraulic Oil .........................................................................................................................168
7.11.3 Hydraulic Oil Cooler ..............................................................................................................................168
7.11.4 Hydraulic Oil Filters...............................................................................................................................168
7.11.5 Header and Reel Hydraulics .................................................................................................................169
7.11.6 Traction Drive Hydraulics......................................................................................................................171
7.11.7 Hoses and Lines ...................................................................................................................................172
7.12 WHEELS AND TIRES ...............................................................................................................173
7.12.1 Drive Wheels ........................................................................................................................................173
7.12.2 Caster Wheels ......................................................................................................................................176
7.13 MAINTENANCE SCHEDULE....................................................................................................180

TABLE OF CONTENTS
Section/Title Page
Form 169552 / 169554 / 169555 6Revision A
7.13.1 Break-In Inspections ............................................................................................................................ 180
7.13.2 Interval Maintenance............................................................................................................................ 181
8TROUBLESHOOTING.......................................................................................................................184
8.1 ENGINE .....................................................................................................................................184
8.2 ELECTRICAL.............................................................................................................................187
8.3 HYDRAULICS............................................................................................................................187
8.4 HEADER DRIVE........................................................................................................................188
8.5 TRACTION DRIVE ....................................................................................................................188
8.6 STEERING AND GROUND SPEED CONTROL.......................................................................189
8.7 CAB AIR.....................................................................................................................................190
8.8 OPERATOR’S STATION...........................................................................................................192
9OPTIONS / ATTACHMENTS.............................................................................................................193
9.1 REEL DRIVE AND LIFT PLUMBING ........................................................................................193
9.2 WINDROWER HYDRAULIC COMPLETION FOR DRAPER HEADER REEL FORE-AFT ......193
9.3 BOOSTER SPRING KIT............................................................................................................193
9.4 INTERNAL BOOSTER SPRING KIT.........................................................................................193
9.5 LIGHT HEADER FLOTATION KIT ............................................................................................193
9.6 AM-FM RADIO...........................................................................................................................193
9.7 HYDRAULIC CENTER-LINK .....................................................................................................193
9.8 FAN AIR BAFFLE KIT ...............................................................................................................193
9.9 TRAINING SEAT .......................................................................................................................193
9.10 KNIFE SPEED, REEL SPEED INDEX, AND TILT SENSOR MODULE ...................................193
9.11 ANTI-SHIMMY KIT FOR CASTERS..........................................................................................193
9.12 SWATH ROLLER ......................................................................................................................193
9.13 WARNING BEACONS...............................................................................................................193
9.14 AUTO-STEER............................................................................................................................193
9.15 ENGINE BLOCK HEATER ........................................................................................................193
9.16 TRANSPORT DRAWBAR .........................................................................................................194
9.17 WEIGHT BOX............................................................................................................................194
9.18 WINDSHIELD SHADES ............................................................................................................194
9.19 HID AUXILLIARY LIGHTING.....................................................................................................194
INDEX .........................................................................................................................................................189
CDM/WCM FAULT CODES .......................................................................................................................192
ENGINE ERROR CODES...........................................................................................................................194

SAFETY
Form 169552 / 169554 / 169555 7Revision A
3 SAFETY
3.1 SAFETY ALERT SYMBOL
This safety alert symbol indicates important
safety messages in this manual and on safety
signs on the machine.
This symbol means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Carefully read and follow the safety message
accompanying this symbol.
WHY IS SAFETY IMPORTANT TO YOU?
ACCIDENTS DISABLE AND KILL.
ACCIDENTS COST.
ACCIDENTS CAN BE AVOIDED.
3.2 SIGNAL WORDS
Note the use of the signal words DANGER,
WARNING, and CAUTION with safety
messages. The appropriate signal word for each
message has been selected using the following
guidelines:
DANGER
Indicates an imminently hazardous situation
that, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious injury. It is also used to alert against
unsafe practices.
CAUTION
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It is also used as a reminder
of good safety practices.
3.3 SAFETY SIGNS
3.3.1 SAFETY SIGN INSTALLATION
Proceed as follows:
a. Be sure the installation area is clean and dry.
b. Decide on the exact location before you remove
the decal backing paper.
c. Remove the smaller portion of the split backing
paper.
d. Place the sign in position, and slowly peel back
the remaining paper, smoothing the sign as it is
applied.
e. Small air pockets can be smoothed out or
pricked with a pin.
3.3.2 SAFETY SIGN LOCATIONS
The safety signs (decals) appear on the
windrower at the locations approximately as
shown.
•Keep safety signs clean and legible at all
times.
•Replace safety signs that are missing or
become illegible.
•If original parts on which a safety sign was
installed are replaced, be sure the repair
part also bears the current safety sign.
•Safety signs are available from your Dealer
Parts Department.

SAFETY
Form 169552 / 169554 / 169555 8Revision A
Safety Sign Locations (cont’d)
IN CAB #109868
IN CAB #109844
IN CAB #160422
BEL0W DOOR HANDLE #32744
ON SEAT #115148
ON OIL RESERVOIR UNDER HOOD
(BOTH SIDES) #44944

SAFETY
Form 169552 / 169554 / 169555 9Revision A
Safety Sign Locations (cont’d)
BEHIND DOOR ON SILL - LH SIDE ONLY
#160396
BEHIND DOOR ON SILL #109843
LIFT LINKAGES #163561
IN CAB #32744
BELOW DOOR HANDLE #32744
ON FRAME #110989

SAFETY
Form 169552 / 169554 / 169555 10 Revision A
Safety Sign Locations (cont’d)
ON FRAME #32743
ON FRAME #110986
ON FRAME #42130
ON FAN SHROUD #134068
EXHAUST COVER #139668

SAFETY
Form 169552 / 169554 / 169555 11 Revision A
Safety Sign Locations (cont’d)
ON DRINK COOLER #160429
ON FRAME #110986
ON TRACTION PUMP
#32743
ON LIFT LINKAGE #163562

SAFETY
Form 169552 / 169554 / 169555 12 Revision A
3.4 GENERAL SAFETY
CAUTION
The following are general farm safety
precautions that should be part of your
operating procedure for all types of
machinery.
Protect yourself.
•When assembling, operating and
servicing machinery, wear all the
protective clothing and personal safety
devices that COULD be necessary for the
job at hand. Don't take chances.
•You may need:
•a hard hat.
•protective shoes with slip
resistant soles.
•protective glasses or goggles.
•heavy gloves.
•wet weather gear.
•respirator or filter mask.
•hearing protection. Be aware that
prolonged exposure to loud noise
can cause impairment or loss of
hearing. Wearing a suitable
hearing protective device such as
ear muffs (A) or ear plugs (B)
protects against objectionable or
loud noises.
•Provide a first-aid kit for use in case of
emergencies.
•Keep a fire extinguisher on the machine.
Be sure the extinguisher is properly
maintained, and be familiar with its
proper use.
•Keep young children away from
machinery at all times.
•Be aware that accidents often happen
when the Operator is tired or in a hurry to
get finished. Take the time to consider
the safest way. Never ignore warning
signs of fatigue.
•Wear close-fitting
clothing and cover long
hair. Never wear dangling
items such as scarves or
bracelets.
•Keep hands, feet, clothing
and hair away from moving parts. Never
attempt to clear obstructions or objects
from a machine while the engine is
running.
•Keep all shields in place. Never alter or
remove safety equipment. Make sure
driveline guards can rotate
independently of the shaft and can
telescope freely.
•Use only service and repair parts made
or approved by the equipment
manufacturer. Substituted parts may not
meet strength, design, or safety
requirements.
(continued next page)
A
B

SAFETY
Form 169552 / 169554 / 169555 13 Revision A
•Do not modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
•Stop engine, and remove key from
ignition before leaving Operator's seat
for any reason. A child or even a pet
could engage an idling machine.
•Keep the area used for servicing
machinery clean and dry. Wet or oily
floors are slippery. Wet spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
•Use adequate light for the job at hand.
•Keep machinery clean. Straw and chaff
on a hot engine are a fire hazard. Do not
allow oil or grease to accumulate on
service platforms, ladders or controls.
Clean machines before storage.
•Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
•When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.

DESCRIPTION
Form 169552 / 169554 / 169555 14 Revision A
4 DESCRIPTION
4.1 DEFINITIONS
The following terms/abbreviations may be used in this manual:
TERM DEFINITION
API American Petroleum Institute
APT Articulating Power Tongue
ASTM American Society Of Testing and Materials
Cab-Forward Windrower operation with the Operator and cab facing in the direction of
travel.
CDM Cab Display Module
Center-link A hydraulic cylinder or turnbuckle type link between the header and the
machine that tilts the header.
ECM Engine Control Module.
GSL Ground Speed Lever
Header A machine that cuts and lays crop into a windrow, and is attached to a
self-propelled windrower.
ISC Intermediate Speed Control.
Mower Conditioner A machine that cuts and conditions hay, and is pulled by an Ag tractor.
PTO Power Take-Off
SAE Society Of Automotive Engineers
Self-Propelled Windrower (SP) Self-propelled machine consisting of a power unit with a header and/or
conditioner.
Tractor Ag type tractor.
Truck A four-wheel highway/road vehicle weighing no less than
7500 lb (3400 kg).
Windrower Power unit of a self-propelled header.
WCM Windrower Control Module

DESCRIPTION
Form 169552 / 169554 / 169555 15 Revision A
4.2 SPECIFICATIONS
ENGINE
Type
Cummins QSB - 4.5L 4 Cylinder Turbo Diesel. Bio-Diesel Approved.
Displacement
275 cu. in. (4.5 L)
Power
Rated
110 hp (81 kW) @ 2500 rpm
Peak
115 hp (86 kW) @ 2300 rpm
Bore 4.21 in (107 mm)
Stroke 4.88 in. (124 mm)
Maximum RPM (no load) - header not
engaged
2270 - 2330
Idle RPM
1100
ELECTRICAL SYSTEM
Recommended Battery (2) 12 Volt, Min. 650CCA, Max Dim - 13 x 7.4 x 9.13 in. (334 x 188 x 232 mm).
Group Rating 29H or 31A. Heavy Duty / Off Road / Vibration Resistant.
Alternator 130 amp
Starter Dry Type
Working Lights 11
TRACTION DRIVE
Type Hydrostatic, 2 Speed Electric Shift
Speed
Field (Cab-Forward) Low Range 0 -11 mph (18 km/h)
Reverse (Cab-Forward) 6 mph (9.6 km/h)
Transport (Cab-Forward) High Range 0 - 16 mph (26 km/h)
Transmission
Type 2 Piston Pumps - 1 per Drive Wheel.
Displacement
3.0 cu. in. (50 cc)
Flow
33 U.S. gpm (125 L/min)
Pressure 5000 psi (345 bar)
Final Drive Type Planetary Gearbox
Ratio 41.42 : 1
Wheel Motor
Displacement
Low Range 2.80 cu. in. (46 cc)
High Range
1.65 cu. in. (27 cc)
SYSTEM CAPACITIES
Fuel Tank
97 U.S. Gallons (367 L)
Cooling
6.6 U.S. Gallons (25 L)
Hydraulic Reservoir 11.5 U.S. Gallons (44 L)
HEADER DRIVE
Piston Pump A Gear Pump B Gear Pump C
Type Hydraulic, Load Sensing Control
Displacement
0 - 3.0 cu. in. (49 cc.)
0 - 1.02 cu. in. (16.7 cc.)
0 - 1.02 cu. in. (16.7 cc.)
Flow
0 - 30 gpm (0 - 114 L/min)
0 - 11.5 gpm (0 - 44 L/min)
0 - 11.5 gpm (0 - 44 L/min)
Pressure
4000 psi (276 bar)
2900 psi (200 bar)
2900 psi (200 bar)
Function
Knife / Conditioner
Reel Drive
Conveyor / DWA
(continued next page)

DESCRIPTION
Form 169552 / 169554 / 169555 16 Revision A
HEADER LIFT / TILT / FLOAT
Type Hydraulic Double Acting Cylinders.
Tilt - Optional Hydraulic Positioning, Optional Mechanical Link
Gear Pump
Displacement 1.02 cu. in. (16.7 cc)
Flow 11.5 gpm (44 L/min)
System Pressure (Relief/Max) 2500 psi (172 bar)
Function Lift / Tilt / Float
HEADER FLOTATION
Primary Adjustment Manual, External, Draw-Bolt With Springs (1 per side).
Inner Booster Spring On Each Side.
CAB
Type Rubber Isolation
Dimensions
Width
63 in. (1600 mm)
Depth 68.3 in. (1735 mm) (at top of window)
Height 64.6 in. (1640 mm)
Volume 125 cu. ft. (3540 L)
Seat Driver Adjustable Mechanical Suspension, Seat Belt
Training
Optional Folding, Cab Mounted, Seat Belt
Windshield Wiper 31.5 in. (800 mm) Blade
Heater 24,000 Btu/h (7038 W)
Air Conditioning 28,280 Btu/h (8288 W)
Electrical Outlets (3) One Live, One On Ignition, One Dual (Live / Keyed)
Mirrors Two Outside
Radio Two Speakers and Antenna Factory Installed. Radio Dealer Installed.
SYSTEM MONITORING
Speeds Ground (mph or km/h), Engine (rpm), Knife (spm) Optional,
Reel (rpm or mph / km/h) Optional, Conveyor (Ref. No.)
Header Height, Angle (Optional)
TIRE OPTIONS
Drive Tires
18.4 - 26 600 - 65 R28 18.4 - 26 23.1 - 26 580 / 70 R26
Bar
Bar Turf Turf Turf
32 psi 26 psi 35 psi 20 psi 24 psi
(221 kPa) (179 kPa) (241 kPa) (138 kPa) (165 kPa)
Rear Tires
All Rear Tire Pressures are 10 psi (69 kPa)
Formed Caster: 7.5 - 16SL Single Rib, 10 - 16 Front Steer Tire
Forked Caster: 16.5L - 16.1 Rib Implement Flotation, 10 - 16 Front Steer Tire
FRAME AND STRUCTURE
Dimensions Refer to Section 4.3 WINDROWER DIMENSIONS
Frame to Ground (Crop Clearance) 45.7 in. (1160 mm)
Weight
Base (less tires and options) 8820 lb. (4000 kg)
Max GVW 17,750 (8,050 kg)
Max CGVW 20,200 lb (9,160 kg)
NG Header Compatibility A30-S and A40-D Auger,
D50 Harvest Header,
D60 Harvest Header up to 35 FT
NOTES: 1. Specifications and design are subject to change without notice or obligation to revise previously sold units.
2. Weights do not include options.

DESCRIPTION
Form 169552 / 169554 / 169555 17 Revision A
4.3 WINDROWER DIMENSIONS
See Illustration on Next Page.
WHEEL
POSITION
TREAD
Inch/mm
HUBS
Inch/mm
CASTERS
Inch/mm
TIRES
Inch/mm
SHIPPING
Inch/mm
WHEEL BASE
Inch/mm
FORWARD REVERSE
DRIVE TIRES
18.4 x 26
Bar and Turf
Rims Inset
Inner/Outer 123.1/3127 139.1/3532
---
142.2/3612
142.9/3630 158.3/4020 120.6/3064
Outer/Outer 130.2/3307 146.1/3712 149.3/3792
Inner/Inner 116/2947 131.9/3352 135.1/3432
18.4 x 26
Bar and Turf
Rims Outset
Inner/Outer 130.1/3305 139.1/3532
---
149.2/3790
142.9/3630 158.3/4020 120.6/3064
Outer/Outer 137.2/3484 146.1/3712 156.3/3970
Inner/Inner 123/3124 131.9/3352 142.1/3610
600/65R28
Radial Tire
Inner/Outer 130.1/3305 139.1/3532
---
153.7/3904
142.9/3630 158.3/4020 120.6/3064
Outer/Outer 137.2/3484 146.1/3712 160.9/4084
Inner/Inner 123/3124 131.9/3352 146.6/3724
23.1 - 26 and
580/70R26
Turf Tires
Inner/Outer 127.2/3230 139.1/3532
---
150/3810
142.9/3630 158.3/4020 120.6/3064
Outer/Outer 134.2/3410 146.1/3712 157.1/3990
Inner/Inner 120.1/3050 131.9/3352 142.9/3630
CASTER TIRES
7.5 - 16SL
Minimum 96.4/2448
---
119.4/3032
Maximum 135.7/3448 158.8/4032
10 - 16
Formed Caster
Minimum 96.4/2448
---
119.4/3032
Maximum 135.7/3448 158.8/4032
10 - 16
Forked Caster
Minimum 96.4/2448
---
118.7/3014
Maximum 135.7/3448 158.0/4014
16.5 x 16.1
Minimum 96.4/2448
---
118.7/3014
Maximum 135.7/3448 158.0/4014
See Illustration on Next Page.

DESCRIPTION
Form 169552 / 169554 / 169555 18 Revision A
WINDROWER DIMENSIONS (cont’d)
FORWARD
45.7 in. (1160
TREAD
HUBS
TIRES
WHEEL BASE
133 in. (3378 mm)
REVERSE
TREAD
CASTERS
WHEEL BASE