MacDon M155 User manual
M155
Self-Propelled Windrowe
r
OPERATOR’S MANUAL
Part #169563 Rev. B
$25
This Manual contains instructions for “SAFETY”, “OPERATION”, and “MAINTENANCE AND SERVICING” for
your new MacDon Model M155 Self-Propelled Windrower.
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its constituents are known
to the State of California to cause cancer, birth defects, and
other reproductive harm.
Battery posts, terminals and related accessories contain lead
and lead components. Wash hands after handling.
M155 SELF-PROPELLED WINDROWER
Form 169563 / 169566 / 169568 1Revision B
1 INTRODUCTION
This manual contains information on the MacDon Model M155 Self-Propelled Windrower that is designed to cut and
lay in windrows, a wide variety of grain, hay and specialty crops. Windrowing allows starting the harvest earlier,
protects the crop from wind damage, and gives you more flexibility in scheduling combine time.
The power unit (referred to inthis manual asthe “windrower”),whencoupled withone ofthe speciallydesignedauger,
rotary, or draper headers, provides a package which incorporates many features and improvements in design.
The M155 Windrower is Dual Direction™,meaning that thewindrower canbe driveninthe cab-forwardor theengine-
forward modes. Right-Hand and Left-Hand designations are therefore determined by the Operator’s position, facing
the direction of travel. This manual uses the terms “right cab-forward”, “left cab-forward”, “right engine-forward”, and
“left engine-forward” when referencing specific locations on the machine.
Use this manual as your first source of information about the machine. Use the Table of Contents and the Index to
guide you to specific areas. Study the Table of Contents to familiarize yourself with how the material is organized.
If you follow the instructions given here, your M155 Windrower will work well for many years.
Use this manual in conjunction with your Header Operator's Manual.
Keep this manual handy for frequent reference, andto pass on to new Operators or Owners. Call your Dealer if you
need assistance, information, or additional copies of this manual. A manual storage case is provided in the cab.
If you require more detailed service information, contact your MacDon Dealer.
CAREFULLY READALL THEMATERIAL PROVIDEDBEFORE ATTEMPTINGTO UNLOAD,ASSEMBLE, ORUSE
THE MACHINE.
.
Published: October, 2011
Form 169563 / 169566 / 169568 2Revision B
2 MODEL AND SERIAL NUMBER
Record the Model Number, Serial Number, and Model Year of the Windrower and Engine on the lines below:
WINDROWER SERIAL NO.____________________YEAR______
Serial Number Plate is located on the left cab-forward side
of the main frame near the walking beam.
ENGINE SERIAL NO.________________________YEAR______
Serial Number Plate is located on the top face of the engine
cylinder head cover.
TABLE OF CONTENTS
Section/Title Page
Form 169563 / 169566 / 169568 3Revision B
1INTRODUCTION .............................................................................................................................. 1
2MODEL AND SERIAL NUMBER..................................................................................................... 2
3SAFETY ........................................................................................................................................... 7
3.1SAFETY ALERT SYMBOL.................................................................................................... 7
3.2SIGNAL WORDS................................................................................................................... 7
3.3SAFETY SIGNS .................................................................................................................... 7
3.3.1Safety Sign Installation....................................................................................................................7
3.3.2Safety Sign Locations...................................................................................................................... 7
3.4GENERAL SAFETY ............................................................................................................ 12
4DESCRIPTION ............................................................................................................................... 14
4.1DEFINITIONS...................................................................................................................... 14
4.2SPECIFICATIONS............................................................................................................... 15
4.3WINDROWER DIMENSIONS ............................................................................................. 17
4.4COMPONENT IDENTIFICATION........................................................................................ 19
5OPERATOR’S STATION............................................................................................................... 20
5.1OPERATOR CONSOLE...................................................................................................... 20
5.2OPERATOR PRESENCE SYSTEM.................................................................................... 21
5.2.1Header Drive.................................................................................................................................21
5.2.2Engine and Transmission..............................................................................................................21
5.3SEAT ADJUSTMENTS........................................................................................................ 21
5.4TRAINING SEAT................................................................................................................. 22
5.5SEAT BELTS....................................................................................................................... 22
5.6STEERING COLUMN ADJUSTMENT................................................................................ 22
5.7LIGHTS................................................................................................................................ 23
5.7.1Cab-Forward Lighting: Field.......................................................................................................... 23
5.7.2Engine-Forward Lighting: Road.....................................................................................................24
5.7.3Cab-Forward Lighting: Road (Optional)......................................................................................... 24
5.7.4Beacon Lighting: Export (N.A. Optional)........................................................................................25
5.8WINDSHIELD WIPERS....................................................................................................... 26
5.9REAR VIEW MIRRORS ...................................................................................................... 26
5.10CAB TEMPERATURE......................................................................................................... 26
5.10.1Heater Shut-Off Valve...................................................................................................................26
5.10.2Air Distribution...............................................................................................................................26
5.10.3Controls.........................................................................................................................................27
5.10.4A/C Compressor Protection...........................................................................................................27
5.11INTERIOR LIGHTS ............................................................................................................. 27
5.12OPERATOR AMENITIES.................................................................................................... 28
5.13RADIOS............................................................................................................................... 29
5.13.1AM/FM Radio ................................................................................................................................29
5.13.2Antenna Mounting.........................................................................................................................29
5.14HORN.................................................................................................................................. 29
5.15ENGINE CONTROLS/GAUGES ......................................................................................... 30
5.16WINDROWER CONTROLS................................................................................................ 31
5.17HEADER CONTROLS......................................................................................................... 32
5.17.1Header Drive Switch...................................................................................................................... 32
5.17.2Header Drive Reverse Button........................................................................................................32
5.17.3GSL Header Switches...................................................................................................................33
5.17.4Console Header Switches.............................................................................................................34
5.18CAB DISPLAY MODULE (CDM)......................................................................................... 36
5.18.1Engine and Windrower Functions.................................................................................................. 36
TABLE OF CONTENTS
Section/Title Page
Form 169563 / 169566 / 169568 4Revision B
5.18.2Header Functions..........................................................................................................................36
5.18.3Operating Screens.........................................................................................................................37
5.18.4Cab Display Module (CDM) Warnings/Alarms...............................................................................45
5.18.5Cab Display Module (CDM) Programming.....................................................................................48
5.18.6Setting Guidelines .........................................................................................................................55
5.18.7Engine Error Codes.......................................................................................................................55
5.18.8CDM and WCM Fault Codes.........................................................................................................55
6OPERATION .................................................................................................................................. 56
6.1OWNER/OPERATOR RESPONSIBILITIES ....................................................................... 56
6.2SYMBOL DEFINITIONS...................................................................................................... 56
6.2.1Engine Functions...........................................................................................................................56
6.2.2Windrower Operating Symbols......................................................................................................57
6.2.3Header Functions..........................................................................................................................57
6.3WINDROWER OPERATION............................................................................................... 58
6.3.1Operational Safety.........................................................................................................................58
6.3.2Break-In Period..............................................................................................................................58
6.3.3Pre-Season Check ........................................................................................................................59
6.3.4Daily Check ...................................................................................................................................59
6.3.5Engine Operation...........................................................................................................................60
6.3.6Driving The Windrower..................................................................................................................64
6.3.7Adjustable Caster Tread Width......................................................................................................70
6.3.8Transporting ..................................................................................................................................72
6.3.9Storage..........................................................................................................................................82
6.4HEADER OPERATION ....................................................................................................... 83
6.4.1Header Lift Cylinder Stops.............................................................................................................83
6.4.2Header Flotation............................................................................................................................84
6.4.3Levelling ........................................................................................................................................87
6.4.4Header Drive .................................................................................................................................88
6.4.5Header Angle.................................................................................................................................89
6.4.6Cutting Height................................................................................................................................91
6.4.7Double Windrowing .......................................................................................................................93
6.4.8Swath Roller Operation..................................................................................................................93
6.5D SERIES HEADER OPERATION...................................................................................... 94
6.5.1Configure Hydraulics .....................................................................................................................94
6.5.2Attach Header Boots .....................................................................................................................94
6.5.3Header Attachment........................................................................................................................95
6.5.4Header Detachment ......................................................................................................................99
6.5.5Header Position...........................................................................................................................101
6.5.6Reel Fore-Aft Position .................................................................................................................101
6.5.7Reel Height..................................................................................................................................101
6.5.8Reel Speed..................................................................................................................................102
6.5.9Draper Speed..............................................................................................................................104
6.5.10Knife Speed.................................................................................................................................106
6.5.11Deck Shift (Optional) ...................................................................................................................107
6.6A SERIES HEADER OPERATION.................................................................................... 108
6.6.1Header Attachment......................................................................................................................108
6.6.2Header Detachment ....................................................................................................................114
6.6.3Auger Speed................................................................................................................................116
6.6.4Reel Speed..................................................................................................................................117
6.6.5Knife Speed.................................................................................................................................120
6.7R SERIES HEADER OPERATION.................................................................................... 121
6.7.1Header Attachment......................................................................................................................121
6.7.2Header Detachment ....................................................................................................................127
6.7.3Disc Speed..................................................................................................................................129
7MAINTENANCE AND SERVICING ............................................................................................. 130
TABLE OF CONTENTS
Section/Title Page
Form 169563 / 169566 / 169568 5Revision B
7.1PREPARATION FOR SERVICING ................................................................................... 130
7.1.1Welding Precautions ................................................................................................................... 130
7.2RECOMMENDED SAFETY PROCEDURES.................................................................... 130
7.3MAINTENANCE SPECIFICATIONS................................................................................. 131
7.3.1Recommended Torques.............................................................................................................. 131
7.3.2Recommended Fuel, Fluids And Lubricants................................................................................ 134
7.3.3Conversion Chart ........................................................................................................................ 135
7.4ENGINE COMPARTMENT HOOD.................................................................................... 136
7.5MAINTENANCE PLATFORMS ......................................................................................... 137
7.5.1Opening/Closing Platforms.......................................................................................................... 137
7.5.2Opening/Closing Platforms for Major Servicing........................................................................... 137
7.6LUBRICATING THE WINDROWER.................................................................................. 138
7.6.1Procedure.................................................................................................................................... 138
7.6.2Lubrication Points........................................................................................................................ 138
7.7OPERATOR’S STATION................................................................................................... 140
7.7.1Seat Belts.................................................................................................................................... 140
7.7.2Safety Systems ........................................................................................................................... 140
7.7.3GSL Adjustments ........................................................................................................................ 141
7.7.4Steering Adjustments.................................................................................................................. 142
7.7.5Park Brake .................................................................................................................................. 144
7.7.6HVAC System ............................................................................................................................. 146
7.8ENGINE............................................................................................................................. 148
7.8.1General Engine Inspection.......................................................................................................... 148
7.8.2Manually Turning Engine............................................................................................................. 149
7.8.3Oil Level ...................................................................................................................................... 150
7.8.4Changing Oil and Oil Filter .......................................................................................................... 151
7.8.5Air Intake System........................................................................................................................ 152
7.8.6Fuel System ................................................................................................................................ 156
7.8.7Engine Cooling System............................................................................................................... 160
7.8.8Gearbox ...................................................................................................................................... 163
7.8.9Exhaust System .......................................................................................................................... 165
7.8.10Belts............................................................................................................................................ 166
7.8.11Engine Speed.............................................................................................................................. 167
7.9COOLING BOX ................................................................................................................. 168
7.9.1Cooling Box Screen..................................................................................................................... 168
7.9.2Rotor To Screen Clearance......................................................................................................... 169
7.9.3Cooling Box Maintenance ........................................................................................................... 170
7.10ELECTRICAL SYSTEM..................................................................................................... 173
7.10.1Battery......................................................................................................................................... 173
7.10.2Headlights: Engine-Forward........................................................................................................ 178
7.10.3Field Lights: Cab-Forward........................................................................................................... 180
7.10.4Flood Lights: Forward.................................................................................................................. 181
7.10.5Flood Lights: Rear....................................................................................................................... 182
7.10.6Red and Amber Lights................................................................................................................. 183
7.10.7Red Tail Lights (If Installed)......................................................................................................... 183
7.10.8Beacons (If Installed)................................................................................................................... 184
7.10.9Gauge Light................................................................................................................................. 186
7.10.10Dome Light.................................................................................................................................. 186
7.10.11Ambient Light .............................................................................................................................. 186
7.10.12Turn Signal Indicators ................................................................................................................. 186
7.10.13Circuit Breakers and Fuses......................................................................................................... 187
7.11HYDRAULIC SYSTEM...................................................................................................... 190
7.11.1Oil Level ...................................................................................................................................... 190
7.11.2Hydraulic Oil Cooler .................................................................................................................... 191
7.11.3Changing Hydraulic Oil................................................................................................................ 191
TABLE OF CONTENTS
Section/Title Page
Form 169563 / 169566 / 169568 6Revision B
7.11.4Hydraulic Oil Filters .....................................................................................................................192
7.11.5Header and Reel Hydraulics........................................................................................................193
7.11.6Traction Drive Hydraulics.............................................................................................................195
7.11.7Hoses and Lines..........................................................................................................................196
7.12WHEELS AND TIRES....................................................................................................... 197
7.12.1Drive Wheels...............................................................................................................................197
7.12.2Caster Wheels.............................................................................................................................200
7.13MAINTENANCE SCHEDULE............................................................................................ 204
7.13.1Break-In Inspections....................................................................................................................204
7.13.2Interval Maintenance ...................................................................................................................205
8TROUBLESHOOTING................................................................................................................. 208
8.1ENGINE............................................................................................................................. 208
8.2ELECTRICAL..................................................................................................................... 211
8.3HYDRAULICS.................................................................................................................... 211
8.4HEADER DRIVE................................................................................................................ 212
8.5TRACTION DRIVE ............................................................................................................ 212
8.6STEERING AND GROUND SPEED CONTROL............................................................... 213
8.7CAB AIR ............................................................................................................................ 214
8.8OPERATOR’S STATION................................................................................................... 216
9OPTIONS/ATTACHMENTS......................................................................................................... 217
9.1DRAPER HEADER REEL DRIVE, LIFT, AND FORE-AFT HYDRAULICS....................... 217
9.2HEADER DRIVE REVERSER........................................................................................... 217
9.3ROTARY HEADER HYDRAULICS ................................................................................... 217
9.4DOUBLE WINDROW ATTACHMENT............................................................................... 217
9.5SELF-ALIGNING CENTER-LINK...................................................................................... 217
9.6EXTERNAL BOOSTER SPRING...................................................................................... 217
9.7INTERNAL BOOSTER SPRING ....................................................................................... 217
9.8LIGHT HEADER FLOTATION........................................................................................... 217
9.9WINDSHIELD SHADES.................................................................................................... 217
9.10AM-FM RADIO................................................................................................................... 217
9.11PRESSURE SENSOR....................................................................................................... 217
9.12WEIGHT BOX.................................................................................................................... 217
9.13TOWING HARNESS ......................................................................................................... 217
9.14SWATH ROLLER LIFT/ CONTROL.................................................................................. 217
9.15WARNING BEACONS....................................................................................................... 217
9.16LIGHTING AND MARKING FOR CAB-FORWARD ROAD TRAVEL................................ 217
9.17FAN AIR BAFFLE.............................................................................................................. 217
9.18AUTO-STEER.................................................................................................................... 218
9.19HID AUXILLIARY LIGHTING............................................................................................. 218
INDEX ....................................................................................................................................................219
CDM/WCM FAULT CODES ..................................................................................................................222
ENGINE ERROR CODES......................................................................................................................224
SAFETY
Form 169563 / 169566 / 169568 7Revision B
3 SAFETY
3.1 SAFETY ALERT SYMBOL
This safety alert symbol indicates important safety
messages in this manual and on safety signs on
the machine.
This symbol means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Carefully read and follow the safety message
accompanying this symbol.
WHY IS SAFETY IMPORTANT TO YOU?
ACCIDENTS DISABLE AND KILL.
ACCIDENTS COST.
ACCIDENTS CAN BE AVOIDED.
3.2 SIGNAL WORDS
Note the use of the signal words DANGER,
WARNING,and CAUTIONwithsafetymessages.
The appropriate signal word for each message
has been selected using the following guidelines:
DANGER
Indicates an imminently hazardous situation
that, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious injury. It is also used to alert against
unsafe practices.
CAUTION
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It is also used as a reminder
of good safety practices.
3.3 SAFETY SIGNS
3.3.1 Safety Sign Installation
Proceed as follows:
a. Be sure the installation area is clean and dry.
b. Decide on the exact location before you remove
the decal backing paper.
c. Remove the smaller portion of the split backing
paper.
d. Place the sign in position, and slowly peel back
the remaining paper, smoothing the sign as it is
applied.
e. Small air pockets can be smoothed out or pricked
with a pin.
3.3.2 Safety Sign Locations
Thesafety signs(decals) appearonthewindrower
at locations approximately as shown on the
following pages.
Keep safety signs clean and legible at all
times.
Replace safety signs that are missing or
become illegible.
If original parts on which a safety sign was
installed are replaced, be sure the repair part
also bears the current safety sign.
Safety signs are available from your Dealer
Parts Department.
SAFETY
Form 169563 / 169566 / 169568 8Revision B
Safety Sign Locations (cont’d)
LIFT LINKAGES #163561
BELOW DOOR HANDLE #32744
IN CAB #32744
BEHIND DOOR ON SILL - LH SIDE ONLY
#160396
BEHIND DOOR ON SILL #109843
ON OIL RESERVOIR UNDER HOOD
(BOTH SIDES) #44944
#135378
SAFETY
Form 169563 / 169566 / 169568 9Revision B
Safety Sign Locations (cont’d)
IN CAB #109868
IN CAB #109844
ON FRAME #110989
IN CAB #160422
BEL0W DOOR HANDLE #32744
ON SEAT #115148
SAFETY
Form 169563 / 169566 / 169568 10 Revision B
Safety Sign Locations (cont’d)
ON FRAME #32743
ON FRAME #110986
EXHAUST COVER #139668 ON FAN SHROUD #134068
ON FRAME #42130
SAFETY
Form 169563 / 169566 / 169568 11 Revision B
Safety Sign Locations (cont’d)
ON LIFT LINKAGE #163562
ON DRINK COOLER #160429
ON FRAME #110986
ON TRACTION PUMP
#32743
SAFETY
Form 169563 / 169566 / 169568 12 Revision B
3.4 GENERAL SAFETY
CAUTION
The following are general farm safety
precautions that should be part of your
operating procedure for all types of machinery.
Protect yourself.
When assembling, operating and
servicing machinery, wear all the
protective clothing and personal safety
devices that COULD be necessary for
the job at hand. Don't take chances.
You may need:
a hard hat.
protective shoes with slip resistant
soles.
protective glasses or goggles.
heavy gloves.
wet weather gear.
respirator or filter mask.
hearing protection. Be aware that
prolonged exposure to loud noise
can cause impairment or loss of
hearing. Wearing a suitable hearing
protective device such as ear muffs
(A) or ear plugs (B) protects against
objectionable or loud noises.
Provide a first-aid kit for use in case of
emergencies.
Keep a fire extinguisher on the machine.
Be sure the extinguisher is properly
maintained, and be familiar with its proper
use.
Keep young children away from machinery
at all times.
Be aware that accidents often happen
when the Operator is tired or in a hurry to
get finished. Take the time to consider the
safest way. Never ignore warning signs of
fatigue.
Wear close-fitting
clothing and cover
long hair. Never wear
dangling items such as
scarves or bracelets.
Keep hands, feet,
clothing and hair away
from moving parts.
Never attempt to clear obstructions or
objects from a machine while the engine is
running.
Keep all shields in place. Never alter or
remove safety equipment. Make sure
driveline guards can rotate independently
of the shaft and can telescope freely.
Use only service and repair parts made or
approved by the equipment manufacturer.
Substituted parts may not meet strength,
design, or safety requirements.
(continued next page)
A B
SAFETY
Form 169563 / 169566 / 169568 13 Revision B
Do not modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
Stop engine, and remove key from ignition
before leaving Operator's seat for any
reason. A child or even a pet could engage
an idling machine.
Keep the area used for servicing
machinery clean and dry. Wet or oily floors
are slippery. Wet spots can be dangerous
when working with electrical equipment.
Be sure all electrical outlets and tools are
properly grounded.
Use adequate light for the job at hand.
Keep machinery clean. Straw and chaff on
a hot engine are a fire hazard. Do not allow
oil or grease to accumulate on service
platforms, ladders or controls. Clean
machines before storage.
Never use gasoline, naphtha or any volatile
material for cleaning purposes. These
materials may be toxic and/or flammable.
When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.
GENERAL
Form 169563 / 169566 / 169568 14 Revision B
4 DESCRIPTION
4.1 DEFINITIONS
The following terms/abbreviations may be used in this manual:
TERM DEFINITION
API American Petroleum Institute
APT Articulating Power Tongue
ASTM American Society Of Testing and Materials
Cab-Forward Windrower operation with the Operator and cab facing in the direction
of travel.
CDM Cab Display Module
Center-link A hydraulic cylinder or turnbuckle type link between the header and the
machine that tilts the header.
DWA Double Windrow Attachment
ECM Engine Control Module.
Engine-Forward Windrower operation with the Operator and engine facing in the direction
of travel.
GSL Ground Speed Lever
Header A machine that cuts and lays crop into a windrow, and is attached to a
self-propelled windrower.
ISC Intermediate Speed Control.
Mower Conditioner A machine that cuts and conditions hay, and is pulled by an agricultural
tractor.
PTO Power Take-Off
SAE Society Of Automotive Engineers
Self-Propelled Windrower (SP) Self-propelled machine consisting of a power unit with a header and/or
conditioner.
Tractor Agricultural type tractor.
Truck A four-wheel highway/roadvehicle weighing no less than 7500 lb(3400 kg).
Windrower Power unit of a self-propelled header.
WCM Windrower Control Module
SPECIFICATIONS
Form 169563 / 169566 / 169568 15 Revision B
4.2 SPECIFICATIONS
ENGINE
Type Cummins QSB - 4.5L 4 Cylinder Turbo Diesel. Bio-Diesel Approved.
(Refer to Engine Manual)
Displacement 275 cu. in. (4.5 L)
Power Rated 148 hp (110 kW) @ 2300 rpm
Peak 156 hp (116 kW) @ 2000 rpm
Bore 4.21 in. (107 mm)
Stroke 4.88 in. (124 mm)
Maximum RPM (no load) (Header Not Engaged) 2320 - 2350
Idle RPM 1100
ELECTRICAL SYSTEM
Recommended Battery (2) 12 Volt, Min. 650CCA, Max Dim - 13 x 7.4 x 9.13 in. (334 x 188 x 232 mm).
Group Rating 29H or 31A. Heavy Duty / Off Road / Vibration Resistant.
Alternator 130 amp
Starter Wet Type
Working Lights 11
TRACTION DRIVE
Type Hydrostatic, 3 Speed Electric Shift
Speed
Field (Cab-Forward) Low Range 0 - 11 mph (18 km/h)
Mid Range 0 - 16 mph (26 km/h)
Reverse (Cab-Forward) 6 mph (9.6 km/h)
Transport (Engine-Forward) High Range 0 - 23 mph (37 km/h)
Transmission
Type 2 Piston Pumps - 1 per Drive Wheel.
Displacement 2.65 cu. in. (44 cc)
Flow 40 U.S. gpm (167 L/min)
Pressure 5500 psi (379 bar)
Final Drive Type Planetary Gearbox
Ratio 30.06 : 1
Wheel Motor Displacement
Low Range 4.15 cu. in. (68 cc)
Mid Range 3.01 cu. in. (50 cc)
High Range 1.93 cu. in. (32 cc)
SYSTEM CAPACITIES
Fuel Tank 97 U.S. Gallons (367 L)
Cooling 6.3 U.S. Gallons (24 L)
Hydraulic Reservoir 17.2 U.S. Gallons (65 L)
HEADER DRIVE
Piston Pump A Piston Pump B
Type Hydraulic, Load Sensing Control
Displacement 0 - 2.75 cu. in. (45 cc.) 0 - 2.32 cu. in. (38 cc.)
Flow 0 - 27 gpm (0 - 102 L/min) 0 - 24 gpm (0 - 91 L/min)
Pressure 4000 psi (276 bar) 3200 psi (220 bar)
Function Knife / Disc / Conditioner Reel / Conveyor
(continued next page)
SPECIFICATIONS
Form 169563 / 169566 / 169568 16 Revision B
HEADER LIFT
/
TILT
/
FLOAT
Type Hydraulic Double Acting Cylinders.
Tilt - Hydraulic Positioning, Optional Mechanical Link
Gear Pumps (2)
Displacement 1.02 cu. in. (16.7 cc)
Flow 11.5 gpm (44 L/min)
System Pressure (Relief/Max) 2500 psi (172 bar)
Function Lift / Tilt / Float / Supercharge
HEADER FLOTATION
Primary Adjustment Manual, External, Draw-Bolt With Springs (1 per side).
Inner Booster Sprin
g
On Each Side.
Fine Adjustment Hydraulic, In-Cab Switch
Automatic Hydraulic, 3 Programmable Settings For All Headers
(Deck Shift Compensation On Draper Headers)
CAB
Type Spring / Shock Suspension
Dimensions
Width 63 in. (1600 mm)
Depth 68.3 in. (1735 mm) (at top of window)
Height 64.6 in. (1640 mm)
Volume 125 cu. ft. (3540 L)
Seat Driver Adjustable Air-Ride Suspension, Seat Belt
Training Folding, Cab Mounted, Seat Belt
Windshield Wiper Front 31.5 in. (800 mm) Blade
Rear 22 in. (560 mm) Blade
Heater 24,000 Btu/h (7038 W)
Air Conditioning 28,280 Btu/h (8288 W)
Electrical Outlets (3) One Live, One On Ignition, One Dual (Live / Keyed)
Mirrors One Inside (Transport - Engine-Forward), Two Outside (Field)
Radio Two Speakers and Antenna Factory-installed. Radio Dealer Installed
SYSTEM MONITORING
Speeds Ground (mph or km/h), Engine (rpm), Knife (spm), Disc (rpm),
Reel (rpm or mph/km/h), Conveyor (Ref. No.)
Header Height, Angle, Float, Header Drive Load Gauge (Option)
TIRE OPTIONS
Drive Tires
18.4 - 26 600 - 65 R28 18.4 - 26 23.1 - 26 580 / 70 R26
Bar Bar Turf Turf Turf
32 psi 26 psi 35 psi 20 psi 24 psi
(221 kPa) (179 kPa) (241 kPa) (138 kPa) (165 kPa)
Rear Tires All Rear Tire Pressures are 10 psi (69 kPa)
Formed Caster: 7.5 - 16SL Single Rib, 10 - 16 Front Steer Tire
Forked Caster: 16.5L - 16.1 Rib Implement Flotation, 10 - 16 Front Steer Tire
FRAME AND STRUCTURE
Dimensions Refer to Section 4.3 WINDROWER DIMENSIONS
Frame to Ground (Crop Clearance) 45.7 in. (1160 mm)
Weight
Base (less tires and options) 9,610 lb. (4,360 kg)
Maximum GVW 21,500 lb. (9,750 kg)
Maximum CGVW 23,100 lb (10,480 kg)
NG Header Compatibility A30-S and A40-D Auger, D50 Harvest Header,
D60 Harvest Header up to 40 FT, R80 and R85 13 FT Rotary Disc only.
NOTES: 1. Specifications and design are subject to change without notice or obligation to revise previously sold units.
2. Weights do not include options.
SPECIFICATIONS
Form 169563 / 169566 / 169568 17 Revision B
4.3 WINDROWER DIMENSIONS
See Illustration on Next Page.
WHEEL
POSITION
TREAD
Inch/mm
HUBS
Inch/mm
CASTERS
Inch/mm
TIRES
Inch/mm
SHIPPING
Inch/mm
WHEEL BASE inch/mm
CAB-FWD ENG-FWD
DRIVE TIRES
18.4 x 26
Bar and Turf
Rims Inset *
Inner/Outer 123.1/3127 139.1/3532
142.2/3612
Outer/Outer 130.2/3307 146.1/3712 --- 149.3/3792 142.9/3630 158.3/4020 120.6/3064
Inner/Inner 116/2947 131.9/3352
135.1/3432
18.4 x 26
Bar and Turf
Rims Outset **
Inner/Outer 130.1/3305 139.1/3532 149.2/3790
Outer/Outer 137.2/3484 146.1/3712 --- 156.3/3970 142.9/3630 158.3/4020 120.6/3064
Inner/Inner 123/3124 131.9/3352 142.1/3610
600/65R28
Radial Tire
Inner/Outer 130.1/3305 139.1/3532 153.7/3904
Outer/Outer 137.2/3484 146.1/3712 --- 160.9/4084 142.9/3630 158.3/4020 120.6/3064
Inner/Inner 123/3124 131.9/3352 146.6/3724
23.1 - 26 and
580/70R26
Turf Tires
Inner/Outer 127.2/3230 139.1/3532 150/3810
Outer/Outer 134.2/3410 146.1/3712 --- 157.1/3990 142.9/3630 158.3/4020 120.6/3064
Inner/Inner 120.1/3050 131.9/3352 142.9/3630
CASTER TIRES
7.5 - 16SL Minimum 96.4/2448 --- 119.4/3032
Maximum 135.7/3448 158.8/4032
10 - 16
Formed Caster
Minimum 96.4/2448 --- 119.4/3032
Maximum 135.7/3448 158.8/4032
10 - 16
Forked Caster
Minimum 96.4/2448 --- 118.7/3014
Maximum 135.7/3448 158.0/4014
16.5 x 16.1 Minimum 96.4/2448 --- 118.7/3014
Maximum 135.7/3448 158.0/4014
* Allows for increased wheel to endsheet clearance with 15 FT draper header.
** Allows for increased wheel to frame clearance in muddy soil conditions.
See Illustration on Next Page.
SPECIFICATIONS
Form 169563 / 169566 / 169568 18 Revision B
WINDROWER DIMENSIONS (cont’d)
ENGINE-FORWARD
TREAD
CASTERS
WHEEL BASE
CAB-FORWARD
45.7 in. (1160 mm)
TREAD
HUBS
TIRES
WHEEL BASE
133 in. (3378 mm)
Other manuals for M155
11
Table of contents
Other MacDon Farm Equipment manuals
MacDon
MacDon A40-D User manual
MacDon
MacDon R80 User manual
MacDon
MacDon R85 User manual
MacDon
MacDon FD75 User manual
MacDon
MacDon M2170 User manual
MacDon
MacDon A30-D User manual
MacDon
MacDon M205 2012 User manual
MacDon
MacDon 5000 User manual
MacDon
MacDon M2170NT User manual
MacDon
MacDon M155 2022 User manual
MacDon
MacDon D50 User manual
MacDon
MacDon D1 Series User manual
MacDon
MacDon FlexDraper FD2 Series User manual
MacDon
MacDon M155 User manual
MacDon
MacDon M1 Series Technical manual
MacDon
MacDon R116 User manual
MacDon
MacDon D65 User manual
MacDon
MacDon R85 User manual
MacDon
MacDon A30-S User manual
MacDon
MacDon D50 User manual
Popular Farm Equipment manuals by other brands
AGCO
AGCO FENDT 9490 x Operator's manual
KINZE Manufacturing, Inc.
KINZE Manufacturing, Inc. 3110 Operator's manual
Sulky
Sulky Optiline MP Series Original instructions
KISANKRAFT
KISANKRAFT KK-TH-JP600 Operation manual
sitrex
sitrex RT/5800-H Assembly, use and maintenance
Krone
Krone Comprima F 155 Original operating instructions
Priefert
Priefert RC98AI operating instructions
Worldwide Construction And Forestry Division
Worldwide Construction And Forestry Division 410J Technical manual
Active
Active Olivator Owner's operation and maintenance manual
The Handy
The Handy THLC09715 instruction manual
Chore-Time
Chore-Time Auger Connector installation instructions
Wiesenfield
Wiesenfield WIE-CLI-200 user manual
