Makita DUX18 User manual
DUX18
EN Cordless Multi Function
Power Head INSTRUCTION MANUAL 6
FR
Moteur Multi-Fonctions Sans Fil
MANUEL D’INSTRUCTIONS 16
DE Multifunktions-Antrieb BETRIEBSANLEITUNG 27
IT Testa motorizzata
multifunzione a batteria ISTRUZIONI PER L’USO 38
NL Multifunctioneel
accuaandrijfsysteem GEBRUIKSAANWIJZING 49
ES Herramienta Multifuncional
Inalámbrica
MANUAL DE
INSTRUCCIONES 60
PT
FERRAMENTA
MULTIFUNCIONAL A BATERIA
MANUAL DE INSTRUÇÕES 72
DA
BRUGSANVISNING 83
EL
93
TR
Akülü Kafa KULLANMA KILAVUZU 105
Fig.1
Fig.2
12
1
2
3
4
5
11
10
9
8
Fig.3
2
1
8
3
4
7
10
5
6
8
9
Fig.4
2
2
1
3
Fig.5
1
Fig.6
1
2
Fig.7
1
2
Fig.8
2
1
Fig.9
1
2
Fig.10
3
2
1
1
5
4
Fig.11
1
2
Fig.12
3
1
Fig.13
1
2
3
Fig.14
1
Fig.15
Fig.12
3
1
2
Fig.16
1
2
Fig.17
Fig.18
1
2
Fig.19
Fig.20
4
1
Fig.21
1
2
Fig.22
1
Fig.23
5
6ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DUX18
No load speed
(without attachment)
Low 0 - 6,800 min-1
High 0 - 9,700 min-1
Overall length 977 mm
Rated voltage D.C. 18 V
Net weight 4.0 kg - 10.3 kg
without notice.
-
Charger
DC18SH
residence.
WARNING:
Recommended portable power pack
Model Rotation speed
Low
-1 0 - 370 min-1
-1 0 - 790 min-1
-1 0 - 7,000 min-1
(Strokes per minute)
-1 0 - 4,000 min-1
-1 -1
0 - 160 min-1 -1
0 - 3,300 min-1 0 - 4,700 min-1
-1 -1
0 - 160 min-1 -1
0 - 160 min-1 -1
0 - 6,600 min-1 -1
0 - 6,600 min-1 -1
7ENGLISH
Type Model
Grass trimmer attachment
Hedge trimmer attachment
Ground trimmer attachment
Cultivator attachment
Shaft extension attachment
Blower attachment
Symbols
Read instruction manual.
Take particular care and attention.
Do not expose to moisture.
Ni-MH
Li-ion
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
on the environment and human health.
Do not dispose of electrical and electronic
waste!
on waste electrical and electronic equip-
as well as their adaptation to national law,
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
equipment.
Intended use
This cordless multi function power head is intended for
driving an approved attachment listed in the section
use the unit for the other purpose.
WARNING:
before using.
8ENGLISH
Noise
Applicable
standard
LpA (dB (A))
Uncertainty K
(dB (A))
LWA (dB (A))
Uncertainty K
(dB (A))
83.6 98.6
(ISO11806-1)
78.7 94.0
(ISO11806-1)
77.7 1.7 91.7
79.3 1.0 1.3
79.8 0.8 91.0
83 394 3
84 3 3
81 3 3
79 390 3
393 3
87 3 3
(ISO11680-1)
87 3 3
(ISO11680-1)
93 3104 3
(ISO11680-1)
93 3104 3
(ISO11680-1)
73.0 83.4
73.6 3.8
73.8 1.4 86.8 3.3
80.7 0.7 91.4
(ISO11806-1)
78.1 0.9 91.3 0.6
(ISO11806-1)
76.0 1.3 86.8
0.7
1.7
1.1 90.9 1.3
NOTE:
NOTE:
WARNING: Wear ear protection.
WARNING: -
WARNING:
9ENGLISH
Vibration
Applicable
standard
2)
Uncertainty K
2)
2)
Uncertainty K
2)
(ISO11806-1)
(ISO11806-1)
(ISO11806-1)
(ISO11806-1)
(ISO11806-1)
(ISO11806-1)
3.1
3.8
4.3 3.7
3.0
(ISO11680-1)
(ISO11680-1)
(ISO11680-1)
(ISO11680-1)
ISO11789
3.4 1.9 1.9
(ISO11806-1)
4.6
(ISO11806-1)
1.6
NOTE:
NOTE:
WARNING:
WARNING:
EC Declaration of Conformity
For European countries only
to this instruction manual.
10 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
-
tions for future reference.
(cordless) power tool.
Additional safety instructions
1.
During operation, keep bystanders or animals
3.
or slippery surface or a steep slope. During
always ensure secure footing.
4.
control.
6.
and always prepare for an accidental kickback.
7.
The
serious accident.
8. Before doing any maintenance or repair work
9.
-
10. -
11. -
13.
14.
-
16.
17.
during operation for cracks or damages.
stops completely. Replace damaged cutting
18.
19.
during use.
grease. Keep all cooling air inlets clear of
debris.
-
The gear case
by fatigue.-
tool in dump or wet locations or expose it to
rain. Water entering the tool will increase the risk
of electric shock.
swallowed.
locations.
Fig.1
1.
-
3.
jewelry.
caught in moving parts.
4. -
11 ENGLISH
1.
serious injury.
diameter.
Fig.2
3.
1.
3.
risk.
4.
stones.
Fig.3
Vibration
1.
-
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
battery.
cartridge.
or explosion.
3.
4.
-
(1) -
-
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
6. -
7.
8.
battery cartridge.
9. Do not use a damaged battery.
10.
forwarding agents, special requirement on pack-
-
ing an expert for hazardous material is required.
national regulations.
around in the packaging.
11.
place. Follow your local regulations relating to
disposal of battery.
-
13.
14.
-
16.
cartridge.
17.
-
cal power lines.
18.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
charger.
12 ENGLISH
Tips for maintaining maximum
battery life
1.
-
-
3. -
4.
PARTS DESCRIPTION
Fig.4
1 3Switch trigger 4Hanger
Handle 6 7Barrier 8Indicator lamps
9 10 Shoulder harness ----
FUNCTIONAL
DESCRIPTION
WARNING:
start-up.
cartridge
CAUTION:
CAUTION: -
cartridge.
Fig.5: 1. Red indicator 2. Button 3.
CAUTION:
If not,
CAUTION:
forcibly.
during operation and the indicator lamps light up if the tool
Fig.6: 1. Indicator lamps
Indicator lamps Protection
status
Color
Blinking
Green Overload
Red Overheat
Red Over-
discharge
-
— The tool is locked.
In this situation, release the switch trigger and remove
switch trigger again to resume.
CAUTION:
13 ENGLISH
turning the tool on again.
If the tool does not operate even when the switches are
charge it.
capacity
Only for battery cartridges with the indicator
Fig.7: 1. Indicator lamps 2.
-
light up for a few seconds.
Indicator lamps Remaining
capacity
Blinking
Charge the
malfunctioned.
NOTE: Depending on the conditions of use and the
NOTE:
WARNING:
Fig.8: 1. Indicator lamps 2.
NOTE:
-
NOTE:
To avoid unintentional start up, the main power switch
is not pulled for a certain period after the main power
switch is turned on.
WARNING:
WARNING: NEVER tape down or defeat pur-
CAUTION: -
CAUTION:
NOTICE: -
Fig.9: 1.2. Switch trigger
To start the tool, turn on the main power switch and
grasp) and then pull the switch trigger. Tool speed is
trigger. To stop the tool, release the switch trigger.
Speed adjusting
the level of speed will change.
Fig.10: 1. Indicator lamps 2.
Indicator lamps Mode
High
Low
14 ENGLISH
To restart the tool, release the switch trigger. Clear the cause
of sudden drop in the rotation speed and then turn the tool on.
NOTE: This function is not a preventive measure for
ASSEMBLY
WARNING:
WARNING:
completely assembled. Operation of the tool in a
-
the arrow mark. Do not remove or shrink the spacer.
Fig.11: 1. Clamp 2.3. Handle
4.5. Spacer
• Grass trimmer attachment *
Fig.12: 1. Barrier 2. Screw
CAUTION:
pipe is secured after installation. Improper instal-
1.
Turn the lever of the power unit toward the attachment side.
Fig.13: 1. Lever
2.
with the arrow mark and insert the attachment pipe until
Fig.14: 1.2.3.
3. Turn the lever toward the power unit side.
Fig.15: 1. Lever
To remove the pipe, turn the lever toward the attach-
ment side and pull the pipe out while pressing down the
Fig.16: 1.2. Lever 3.
-
dling of the tool.
Fig.17: 1. Handle 2.
WARNING: Be extremely careful to maintain
operator.
CAUTION: -
-
CAUTION:
CAUTION:
1.
Fig.18
2. Clasp the hook on the shoulder strap to tool's
hanger.
Fig.19: 1. Hanger 2. Hook
3.
working position.
Fig.20
The shoulder harness features a means of quick
release.
tool from the shoulder harness.
Fig.21: 1. Buckle
CAUTION:
When not in use, store the hex wrench as illustrated to
Fig.22: 1. Handle 2. Hex wrench
15 ENGLISH
MAINTENANCE
WARNING:
before attempting to perform inspection or main-
NOTICE:
cracks may result.
tool.
Battery guard
WARNING:
for repairs.
Fig.23: 1.
TROUBLESHOOTING
-
ment parts for repairs.
State of abnormality Probable cause (malfunction) Remedy
Overheating. Stop using of tool to allow it to cool down.
manual.
OPTIONAL
ACCESSORIES
CAUTION:
accessories or attachments might present a risk of
for its stated purpose.
-
Center.
-
• Grass trimmer attachment
• Hedge trimmer attachment
• Ground trimmer attachment
• Cultivator attachment
• Shaft extension attachment
• Blower attachment
NOTE:
16 FRANÇAIS
FRANÇAIS (Instructions originales)
SPÉCIFICATIONS
Modèle : DUX18
Vitesse à vide
(sans accessoire)
0 - 6 800 min-1
Élevé 0 - 9 700 min-1
Longueur totale 977 mm
Tension nominale 18 V CC
4,0 kg - 10,3 kg
Batterie
Chargeur
DC18SH
résidez.
AVERTISSEMENT : L’utilisation
Modèle Vitesse de rotation
Faible
Lame supérieure -1 0 - 370 min-1
Lame inférieure -1 0 - 790 min-1
-1 0 - 7 000 min-1
-1 0 - 4 000 min-1
-1 -1
0 - 160 min-1 -1
0 - 3 300 min-1 0 - 4 700 min-1
-1 -1
0 - 160 min-1 -1
0 - 160 min-1 -1
0 - 6 600 min-1 -1
0 - 6 600 min-1 -1
17 FRANÇAIS
Type Modèle
Outil Ciseaux rotatifs
Tête Dresse-Bordures
Outil Balai Brosse
Outil Balai Racleur
Symboles
d’être utilisés pour l’appareil. Veillez à comprendre leur
Lire le mode d’emploi.
Veuillez être prudent et rester attentif.
Ne pas exposer à l’eau.
Ni-MH
Li-ion
uniquement
dangereux dans l’équipement, les déchets
d’équipements électriques et électro-
peuvent avoir un impact négatif sur l’envi-
ronnement et la santé humaine.
Conformément à la directive européenne
relative aux déchets d’équipements élec-
triques et électroniques et aux déchets
son adaptation à la législation nationale,
les déchets d’équipements électriques,
être collectés séparément et déposés
dans un point de collecte distinct pour
-
l’environnement.
-
Utilisations
AVERTISSEMENT : Lire le manuel d’instruc-
-
Le non-respect
18 FRANÇAIS
Bruit
Accessoire
sonore moyenne
sonore moyenne
Norme
applicable
LpA (dB (A))
Incertitude K
(dB (A))
LWA (dB (A))
Incertitude K
(dB (A))
83,6 98,6
(ISO11806-1)
Lame métallique 78,7 94,0
(ISO11806-1)
77,7 1,7 91,7
Lame en plastique 79,3 1,0 1,3
Lame en plastique 79,8 0,8 91,0
83 394 3
84 3 3
81 3 3
79 390 3
393 3
87 3 3
(ISO11680-1)
87 3 3
(ISO11680-1)
93 3104 3
(ISO11680-1)
93 3104 3
(ISO11680-1)
73,0 83,4
73,6 3,8
73,8 1,4 86,8 3,3
80,7 0,7 91,4
(ISO11806-1)
78,1 0,9 91,3 0,6
(ISO11806-1)
76,0 1,3 86,8
0,7
1,7
1,1 90,9 1,3
-
NOTE :
standard et peuvent être utilisées pour comparer les outils entre eux.
NOTE :
19 FRANÇAIS
AVERTISSEMENT : Portez un serre-tête antibruit.
AVERTISSEMENT :
AVERTISSEMENT :
-
-
Vibration
Accessoire
Norme
applicable
2)
Incertitude K
2)
2)
Incertitude K
2)
moins
moins
(ISO11806-1)
Lame métallique
moins
moins
(ISO11806-1)
moins
moins
(ISO11806-1)
Lame en plastique
moins
moins
(ISO11806-1)
moins
moins
(ISO11806-1)
Lame en plastique
moins
moins
(ISO11806-1)
3,1
3,8
moins
4,3 3,7
3,0
moins
moins
(ISO11680-1)
moins
moins
(ISO11680-1)
moins
(ISO11680-1)
moins
moins
(ISO11680-1)
moins
moins
moins
moins
moins
moins
ISO11789
3,4 1,9 1,9
(ISO11806-1)
4,6
(ISO11806-1)
moins
moins
moins
1,6
moins
NOTE :
standard et peuvent être utilisées pour comparer les outils entre eux.
NOTE :
20 FRANÇAIS
AVERTISSEMENT : -
AVERTISSEMENT :
Pour les pays européens uniquement
CONSIGNES DE
SÉCURITÉ
AVERTISSEMENT : Veuillez lire les
Le non-respect de toutes les instructions
-
-
fait référence à l’outil électrique alimenté par le secteur
(avec cordon d’alimentation) ou à l’outil électrique fonc-
1.
badauds ou les animaux d’au moins 15 m de
3.
jamais sur une surface instable ou glissante
-
4.
-
de pierres ou d’autres objets durs. Ils peuvent
-
mages matériels.
6.
Recul.
7. -
dant un court instant, retirez toujours la bat-
terie.
en place peut être utilisé par une personne non
autorisée et provoquer de graves accidents.
8.
-
gnez-le toujours et retirez la batterie.
9. -
toyage et un entretien complets. Retirez la bat-
10.
11.
des gants de protection. Les lames de coupe
peuvent gravement couper les mains nues.
lame sur la lame.
13.
utilisation.
14. -
de coupe.
d’autres obstacles comme un arbre.
16.
l’outil de coupe. Ne faites jamais tourner l’outil
17.
l’accessoire de coupe s’arrête complètement.
18.
cas d’orage.
19. -
Tenez toujours l’outil à deux mains pendant le
fonctionnement. Ne tenez jamais l’outil d’une
seule main pendant le fonctionnement.
Other manuals for DUX18
7
This manual suits for next models
2
Table of contents
Languages:
Other Makita Power Tools manuals
Makita
Makita 903D User manual
Makita
Makita DCG180ZBK User manual
Makita
Makita VR001G User manual
Makita
Makita STRAIGHT SHEAR JS1660 User manual
Makita
Makita AT450H User manual
Makita
Makita 4322 User manual
Makita
Makita JS1602J User manual
Makita
Makita HK0500 User manual
Makita
Makita DUX18ZX1 User manual
Makita
Makita DJS200 User manual
Makita
Makita HM1801 User manual
Makita
Makita DTW250 User manual
Makita
Makita TM3010C User manual
Makita
Makita RP0910 User manual
Makita
Makita UH201DSAX User manual
Makita
Makita BSR730 User manual
Makita
Makita HM0810T User manual
Makita
Makita 3706 User manual
Makita
Makita HM1304 User manual
Makita
Makita DHK180Z User manual
