MASSEY FERGUSON MF 9100 VE User manual

MF 9100 VE
OPERATOR’S MANUAL
Series Planters
Models: 9108 VE (70 cm)
FROM MASSEY FERGUSON

Congratulations on your selection of an AGCO®Product. We believe
you have exercised excellent judgment in the purchase of your
AGCO®machine. We are most appreciative of your patronage.
Your Dealer has performed the pre-delivery service on your new
machine.
He will discuss with you the operating and maintenance instructions
given in this manual, and instruct you in the correct and varied
applications of this machine. Call on him at any time when you have
a question or need equipment related to the use of your machine.
We recommend that you carefully read this entire manual before
operating the machine. Also, time spent in becoming fully
acquainted with its performance features, adjustments, and
maintenance schedules will be repaid in a long and satisfactory life
of the product.
This equipment is covered by a written warranty which will be
provided to you by your AGCO®Dealer at time of purchase.
AGCO®reserves the right to make changes or add improvements to its products at any time
without incurring any obligation to make such changes to products manufactured previously.
AGCO ®, or its dealers, accept no responsibility for variations which may be evident in the actual
specifications of its products and the statements and descriptions contained in this publication.
Find manuals at https://best-manuals.com

9108 VE (70 cm) Planter
1 Safety .....................................................................7
1.1 Introduction .........................................................9
1.1.1 Safety symbol ....................................................9
1.1.2 Safety messages ..................................................9
1.1.3 Information messages ..............................................9
1.1.4 Safety signs ......................................................9
1.1.5 A word to the operator .............................................10
1.1.6 This manual .....................................................11
1.2 Operation ..........................................................12
1.2.1 Prepare for operation ..............................................12
1.2.2 General information ...............................................12
1.2.3 Personal protective equipment .......................................13
1.2.4 Seat instructions .................................................14
1.2.5 Shield and guards .................................................14
1.2.6 Exhaust warning .................................................15
1.2.7 Flying debris ....................................................15
1.2.8 Handrails .......................................................15
1.2.9 Agricultural chemicals .............................................16
1.3 Travel on public roads ..............................................17
1.4 Maintenance .......................................................19
1.4.1 General maintenance information .....................................19
1.4.2 Fire prevention and first aid .........................................21
1.4.3 High pressure leaks ...............................................22
1.4.4 Tire safety ......................................................23
1.4.5 Replacement parts ................................................23
1.5 Safety and informational signs ......................................24
1.5.1 Safety and informational signs .......................................24
1.5.2 Warning - Chemical ingestion hazard ...................................24
1.5.3 Warning - Shut off engine ...........................................24
1.5.4 Warning - High pressure ............................................25
1.5.5 Speed sign .....................................................25
1.5.6 Warning - Operators manual .........................................25
1.5.7 Warning - Crushing hazard ..........................................25
1.5.8 Warning - Crushing hazard ..........................................26
1.5.9 Warning - Shearing hazard ..........................................26
1.5.10 Warning - PTO speed .............................................26
1.5.11 Danger - Entanglement hazard ......................................26
1.6 Cylinder stops ......................................................27
1.6.1 Wheel lift cylinder stops ............................................27
1.6.2 Markers ........................................................27
2 Introduction ..............................................................29
2.1 Introduction ........................................................31
2.1.1 Units of measurement .............................................31
2.1.2 Replacement parts ................................................31
2.1.3 Intended use ....................................................31
2.1.4 Proper disposal of waste ...........................................31
2.2 Machine identification ..............................................32
2.2.1 Serial number plate ...............................................32
2.2.2 Serial number description ...........................................32
2.3 Main machine components ..........................................34
Table of contents
9108 VE (70 cm) Planter
700208462A
Find manuals at https://best-manuals.com

3 Operation .................................................................35
3.1 Connecting the planter to the tractor ................................37
3.1.1 Preparing the tractor ..............................................37
3.1.2 Connecting the drawbar hitch ........................................37
3.1.3 Connect the blower motor hoses .....................................38
3.1.4 Adjusting the remote valve flow ......................................39
3.1.5 Installing the hydraulic pump, if equipped ...............................39
3.2 Disconnecting the planter from the tractor ...........................41
3.3 Prepare the machine for operation ......................................... 0
3.4 Roading the machine ...............................................42
3.4.1 Prepare to road the machine .........................................42
3.4.2 Safety precautions ................................................42
3.4.3 Lamp operation ..................................................42
3.5 Field operation .....................................................44
3.5.1 Operate in the field ...............................................44
3.5.2 Checking the seed population ........................................45
3.5.3 Finishing the field .................................................45
3.6 Seed ...............................................................47
3.6.1 Seed lubricant ...................................................47
3.7 Seed meter ........................................................48
3.7.1 Seed meter components ...........................................48
3.7.2 Crop kits .......................................................49
3.7.2.1 Crop setup guide ...........................................49
3.7.2.2 Replacing a crop kit .........................................53
3.7.3 Checking the disc shims ............................................57
3.7.4 Removing a seed meter ............................................60
3.7.5 Installing a seed meter .............................................61
3.7.6 Assembling the meter to the hopper ...................................63
3.8 Seed meter vacuum ................................................65
3.8.1 Vacuum settings .................................................65
3.8.2 Vacuum motor operation ...........................................65
3.9 Row units ..........................................................66
3.9.1 Gauge wheels ...................................................66
3.9.2 Adjusting the seed depth ...........................................66
3.9.3 Checking the seed depth ...........................................66
3.9.4 Heavy-duty springs ................................................67
3.10 Closing wheels ...................................................68
3.10.1 Dual wheel down pressure .........................................69
3.10.2 Single wheel down pressure ........................................69
3.10.3 Closing wheel spacing and offset ....................................69
3.10.3.1 Adjusting the closing wheel spacing and offset ....................70
3.10.4 Centering the closing wheels .......................................70
3.11 Markers ...........................................................71
3.11.1 Marker operation ................................................71
3.11.2 Marker speed operating notes ......................................71
3.11.3 Flat fold markers ................................................72
3.11.4 Marker shear bolt ................................................73
3.11.5 Adjusting the marker disc ..........................................73
3.11.6 Adjusting the marker arm length .....................................73
3.11.6.1 Marker arm length .........................................74
3.11.7 Marker sequence valve ............................................75
3.12 Dry fertilizer option ...............................................76
3.12.1 Fertilizer transmission ............................................76
3.12.2 Application rate .................................................76
3.12.3 Granular fertilizer rate - Kg per hectare .................................77
Table of contents
9108 VE (70 cm) Planter
700208462A
Find manuals at https://best-manuals.com

3.12.4 Check the application rate for 70 cm row width ..........................77
4 Maintenance ..............................................................79
4.1 Service schedule ...................................................... 0
4.2 Checklists ..........................................................81
4.2.1 Beginning of the day ..............................................81
4.2.2 End of the day ...................................................81
4.2.3 Beginning of the season ............................................81
4.2.4 Storage ........................................................81
4.3 Lubrication points ..................................................83
4.3.1 Sealed bearings ..................................................83
4.3.2 Row unit lubrication points ..........................................83
4.3.3 Marker lubrication points ...........................................84
4.3.4 Wheel pivot lubrication points ........................................85
4.3.5 Dry fertilizer transmission lubrication ...................................85
4.3.6 Drive clutch lubrication .............................................86
4.4 Seed meter ........................................................87
4.4.1 Yearly maintenance ...............................................87
4.4.2 Checking the disc shims ............................................87
4.4.3 Replacing the vacuum seal ..........................................89
4.5 Hydraulic ..........................................................91
4.5.1 Changing the hydraulic oil and filter ....................................91
4.5.2 Cleaning the hydraulic oil coolers .....................................92
4.6 Wheel bearings .....................................................94
4.6.1 Lubricating the wheel bearings .......................................94
4.6.2 Replacing the wheel bearings ........................................94
4.6.3 Adjusting the wheel bearings ........................................96
4.7 Row unit ...........................................................98
4.7.1 Adjusting the gauge wheel to opener clearance ...........................98
4.7.2 Calibrating the gauge wheel depth ....................................98
4.7.3 Removing the gauge wheels ........................................99
4.7.4 Installing the gauge wheels .........................................99
4.7.5 Replacing the opener disc bearings ...................................100
4.7.6 Replacing the opener discs .........................................101
4.7.7 Setting the opener disc contact ......................................102
4.7.8 Removing the seed tubes ..........................................104
4.7.9 Installing the seed tubes ...........................................104
4.7.10 Replacing the tube guard ......................................... 105
4.7.11 Adjusting the tube clip ........................................... 105
4.8 Seed sensors ......................................................107
4.8.1 Cleaning the seed sensors ......................................... 107
4.8.2 Testing the seed sensors .......................................... 107
4.8.3 Replacing the seed sensors ........................................ 108
4.9 Electronic controls .................................................109
4.9.1 General electronic maintenance ..................................... 109
4.9.2 Electrical system overview .........................................110
4.9.3 Status lamp for the single row module and vDrive module .................. 113
5 Troubleshooting ......................................................... 115
5.1 Low vacuum ...................................................... 117
5.2 vSet 2 troubleshooting .............................................118
5.3 Hydraulic troubleshooting ............................................... 0
5.4 Planter troubleshooting ................................................. 0
5.5 Single disc fertilizer opener troubleshooting ........................ 120
6 Specifications ............................................................123
Table of contents
9108 VE (70 cm) Planter
700208462A
Find manuals at https://best-manuals.com

6.1 Specifications ..................................................... 125
6.1.1 Frame specifications ............................................. 125
6.1.2 Tire specifications ............................................... 125
6.1.3 Machine dimensions ............................................. 126
6.1.4 Marker specifications .............................................126
6.1.5 Row unit specifications ............................................126
6.1.6 Hydraulic system specifications ..................................... 126
6.1.7 Shear pin specifications ........................................... 127
6.1.8 Approximate shipping weight ....................................... 127
6.1.9 Special bolt torques .............................................. 127
6.1.10 Tractor requirement ............................................. 127
6.1.11 20/20 seedsense terminal specifications .............................. 128
7 Accessories ..............................................................129
7.1 Accessories ....................................................... 131
7.1.1 Stroke control segments kit ........................................ 131
7.1.2 Closing wheel kits ............................................... 131
7.1.2.1 Single rubber wheel ........................................131
7.1.2.2 Angled dual rubber wheels ...................................131
7.1.2.3 Angled dual cast iron wheels ................................. 132
7.1.3 Attachments mounted on the row unit linkage ...........................132
7.1.3.1 Disc furrower attachment ................................... 132
7.1.3.2 Bed leveler .............................................. 132
7.1.3.3 Spring tines ..............................................133
7.1.3.4 Adjusting the row unit linkage attachments .......................133
7.1.4 Row unit mounted tillage .......................................... 134
7.1.4.1 Row unit-mounted tillage coulter .............................. 134
7.1.4.2 Coulter with residue manager ................................ 134
7.1.4.3 Residue manager ......................................... 134
7.1.4.4 Trashmaster attachment .................................... 135
7.1.4.5 Floating residue manager ....................................135
7.1.5 Frame mounted tillage ............................................ 135
7.1.5.1 Frame-mounted tillage coulter ................................ 135
7.1.5.2 Coulter with residue manager ................................ 136
7.1.5.3 Strip/ridge till discs ........................................ 136
7.1.5.4 Stabilizing coulter ......................................... 136
7.1.6 Coulter disc blades ...............................................136
7.1.7 Double-disc fertilizer opener ........................................ 138
7.1.8 Gauge wheel mud scraper kit ....................................... 139
7.1.9 Safety and instructional sign replacement .............................. 139
8 Index ....................................................................141
Table of contents
9108 VE (70 cm) Planter
700208462A
Find manuals at https://best-manuals.com

1. Safety
1.1 Introduction ..............................................................9
1.1.1 Safety symbol .........................................................9
1.1.2 Safety messages .......................................................9
1.1.3 Information messages ...................................................9
1.1.4 Safety signs ...........................................................9
1.1.5 A word to the operator ..................................................10
1.1.6 This manual ..........................................................11
1.2 Operation ...............................................................12
1.2.1 Prepare for operation ...................................................12
1.2.2 General information ....................................................12
1.2.3 Personal protective equipment ............................................13
1.2.4 Seat instructions ......................................................14
1.2.5 Shield and guards ......................................................14
1.2.6 Exhaust warning ......................................................15
1.2.7 Flying debris .........................................................15
1.2.8 Handrails ............................................................15
1.2.9 Agricultural chemicals ..................................................16
1.3 Travel on public roads ...................................................17
1.4 Maintenance ............................................................19
1.4.1 General maintenance information ..........................................19
1.4.2 Fire prevention and first aid ..............................................21
1.4.3 High pressure leaks ....................................................22
1.4.4 Tire safety ...........................................................23
1.4.5 Replacement parts .....................................................23
1.5 Safety and informational signs ...........................................24
1.5.1 Safety and informational signs ............................................24
1.5.2 Warning - Chemical ingestion hazard ........................................24
1.5.3 Warning - Shut off engine ................................................24
1.5.4 Warning - High pressure .................................................25
1.5.5 Speed sign ..........................................................25
1.5.6 Warning - Operators manual ..............................................25
1.5.7 Warning - Crushing hazard ...............................................25
1.5.8 Warning - Crushing hazard ...............................................26
1.5.9 Warning - Shearing hazard ...............................................26
1.5.10 Warning - PTO speed ..................................................26
1.5.11 Danger - Entanglement hazard ...........................................26
1.6 Cylinder stops ...........................................................27
1.6.1 Wheel lift cylinder stops .................................................27
1.6.2 Markers .............................................................27
Table of contents
9108 VE (70 cm) Planter 7
700208462A
Find manuals at https://best-manuals.com

Table of contents
8 9108 VE (70 cm) Planter
700208462A
Find manuals at https://best-manuals.com

1.1 Introduction
1.1.1 Safety symbol
The safety symbol tells you about a dangerous
area!
Look for the safety symbol in this manual and on
the machine. The safety symbols tell you that
there is important safety instructions in the
manual.
GUID-4C201302-DBD2-4BFB-8D98-1DDED263BD6E-high.jpg [High]
Fig. 1
1.1.2 Safety messages
The words DANGER, WARNING or CAUTION are
used with the safety symbol. Learn these safety
messages and obey the recommended
precautions and safety instructions.
DANGER:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY will occur.
WARNING:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY can occur.
CAUTION:
If you do not obey the recommended
precautions and safety instructions,
INJURY can possibly occur.
GUID-73F05026-C37B-415A-8140-AD939A283378-high.jpg [High]
Fig. 2
1.1.3 Information messages
The words important and note are not related to personal safety, and are used to give information about
the operation and servicing of the machine.
IMPORTANT: Identifies special instructions or procedures which, if not followed, can cause damage to the
machine, the process, or the area around the machine.
NOTE: Information to make procedures easier.
1.1.4 Safety signs
WARNING:
Do not remove the safety signs. Replace safety signs that can not be read, are damaged, or are missing.
Clean the machine surface with a weak soap and water solution before replacing the safety signs.
Replacement safety signs are available from your dealer.
[V]
GUID-5D9F270E-D748-4741-82B1-BE49B78685F2 [V4]
GUID-E54F7740-C021-42A8-8784-4287BE4356C8 [V4]
GUID-9A909F52-D57E-4C30-8CC7-6FDB6D7E9982 [V3]
GUID-2FB17168-6A01-47C5-B298-234AF171520B [V4]
1. Safety
9108 VE (70 cm) Planter 9
700208462A
Find manuals at https://best-manuals.com

Always make sure safety signs are in the correct locations and can be read. Illustrations of safety sign
locations are at in this section.
Keep the safety signs clean. If it is necessary, use a weak soap and water solution.
1.1.5 A word to the operator
It is your responsibility to read and understand the
safety section in this manual and the manual for all
implements before operating this machine. You
are responsible for your safety. Good safety
procedures not only prevent injury to you, but also
the persons around you.
Make the information in the safety section in this
manual a part of your safety program. This safety
section is written only for this type of machine.
Safety is your responsibility. You can prevent injury
and death.
This safety section gives basic safety examples
that can occur during the operation and
maintenance of your machine. This section is not a
replacement for safety information in other
sections of this manual.
Injury or death can occur if the safety instruction is
not obeyed.
Learn how to operate the machine and how to use
the controls correctly.
Do not operate or let persons operate the machine
that do not know how to operate the machine.
Follow all safety instructions in the manuals and
on the safety signs on the machine, the
implements, and the attachments.
Use only approved attachments and implements.
Make sure your machine has the correct
equipment that is necessary by the local
regulations.
WARNING:
Do not use alcohol or drugs that can
have an effect on alertness or
coordination. If you use prescription
or 'over the counter' drugs, get
medical advice about the safe
operation of machines.
CAUTION:
If attachments or implements used
with this machine have a different
Operator Manual, see that manual for
other important safety instructions.
CAUTION:
See the engine Operation and
Maintenance Manual for other
important safety instructions.
GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]
Fig. 3
GUID-F38BCC9A-5A98-41F3-BA3C-2C5AB224EDFB [V5]
1. Safety
10 9108 VE (70 cm) Planter
700208462A
Find manuals at https://best-manuals.com

CAUTION:
See the windrower tractor Operator
Manual for other important safety
instructions.
CAUTION:
See the header Operator Manual for
other important safety instructions.
CAUTION:
See the combine Operator Manual for
other important safety instructions.
1.1.6 This manual
This manual covers general safety instructions for this machine. Keep this manual with the machine.
Right and left, as used in this manual, are given as if you are in the operator seat.
The photos, illustrations, and data used in this manual were up to date when published, but in-line
production changes can make your machine have small differences. The manufacturer reserves the right to
redesign and change the machine as necessary without notification.
WARNING:
In some of the illustrations and photos used in this manual, shields or guards are
removed. Operate the machine only with all shields and guards in the correct installed
positions. If the removal of shields or guards is necessary to make a repair, they must be
installed before operation.
GUID-F180C720-C8A9-4411-AA97-B6147E05E2A0 [V2]
1. Safety
9108 VE (70 cm) Planter 11
700208462A

1.2 Operation
1.2.1 Prepare for operation
Read and understand all operating instructions and precautions in this manual before operating or servicing
the machine.
Make sure you know and understand the positions and operations of all controls. Make certain all controls
are in neutral and the park brake is applied before starting the machine.
Make certain all people are well away from your area of work before starting and operating the machine.
Check and learn all controls in an area clear of people and obstacles before starting your work. Be aware of
the machine size and have enough space available to allow for operation. Never operate the machine at
high speeds in crowded places.
Emphasize the importance of using correct procedures when working around and operating the machine.
Do not let children or unqualified persons operate the machine. Keep others, especially children, away
from your area of work. Do not permit others to ride on the machine.
Make sure the machine is in the proper operating condition as stated in the Operator Manual. Make sure
the machine has the correct equipment required by local regulations.
All equipment has a limit. Make sure you understand the speed, brakes, steering, stability and load
characteristics of this machine and the tractor before you start.
1.2.2 General information
When parking, park the machine and the tractor on
a solid level surface. put all controls in neutral and
apply the tractor park brake. Stop the tractor
engine and take the key with you.
Make sure the tractor and implement are in the
proper operating condition according to the
operator manuals. Make sure the tractor brakes
and the machine brakes are adjusted correctly.
The tractor must have enough weight and braking
capacity, especially when operating on roads and
terrain that is not even. Use a tractor of
recommended size and weight to tow the
machine. See the machine specifications for the
minimum tractor size and weight.
Tractor must be equipped with rollover protective
structure (ROPS) and a seat belt. use seat belt
during operation.
Do not dismount from moving machinery.
Always operate the machine with the terminal
turned on.
Never start the tractor with the PTO engaged or
terminal turned on.
Stay off slopes too steep for operation.
Where possible avoid operating the machine near
ditches, embankments, and holes. Reduce ground
speed when operating on rough, slippery, or
muddy surfaces and when turning or crossing
slopes.
GUID-E77631FB-0DC0-4637-9090-88018315176E-high.jpg [High]
Fig. 4
[V]
GUID-A25B667B-D7CF-4C75-8AED-C10113104322 [V4]
GUID-A3ACB803-2E1D-4690-84C2-84FEDB4354EB [V4]
1. Safety
12 9108 VE (70 cm) Planter
700208462A

Be aware of the size of the machine and have
enough space available to allow for operation.
Make sure all persons are clear of the rear of the
bale chute when raising and lowering the chute,
ejecting or dumping a bale.
Always lower the machine when not in use and
relieve the pressure in the hoses and cylinders.
Do not stand between the tractor and the
implement to install the hitch pin when the tractor
engine is running.
Avoid contact with electrical power lines. Contact
with electrical power lines can cause electrical
shock, resulting in very serious injury or death.
Watch for overhead wires or other obstructions
when raising the markers, and when moving the
machine with the markers raised.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 5
1.2.3 Personal protective equipment
Put on all personal protective equipment (PPE) and
protective clothes that are supplied to you or that
are necessary for the conditions and by applicable
laws. PPE includes equipment to prevent injury to
your eyes, lungs, ears, head, hands and feet.
Always keep hands, feet, hair, and your clothes
away from parts that move. Do not put on loose
clothing, jewelry, watches, or other items that can
tangle in parts that move. Tie up long hair that can
also tangle in moving parts.
GUID-1AEEBD1D-C71B-432C-9D23-52467D7C0BBF-high.jpg [High]
Fig. 6
GUID-7FEFA67B-E06F-4EFE-A23E-738FE96997E9 [V3]
1. Safety
9108 VE (70 cm) Planter 13
700208462A

1.2.4 Seat instructions
Put on the seat belt before you operate the
machine. Always sit in the seat and have the seat
belt on while you operate the machine. Replace
the seat belts when they become worn or broken.
Do not use a seat belt loosely. Make sure that
there is some tension on the seat belt. Do not
wear the seat belt in a twisted condition or
pinched between the structural parts of the seat.
Put on the seat belt if the instructional seat is
used. Use the instructional seat only to train new
operators or to find a problem. The instructional
seat is only for short periods of use.
Do not let children use the instructional seat or be
in the cab. Do not let other persons use the
instructional seat or be in the cab.
Drive the machine at slower speed and on level
ground when the instructional seat is used. Do not
start, stop, or turn quickly when the instructional
seat is used. Do not drive on highways or public
roads when the instructional seat is used.
GUID-5BA328EA-7732-4CE8-97B2-6511151E943C-high.jpg [High]
Fig. 7
1.2.5 Shield and guards
All shields and guards must be in the correct
position and in good condition.
Do not open, remove, or put your hand behind
shields while the engine in operation. Belts and
components that turn can cause entanglement,
which can cause injury and death. Keep away from
the components that turn.
GUID-6163F2D6-39D6-48BF-871C-AC346EE022D2-high.jpg [High]
Fig. 8
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that turn can cause injury or death. Keep
away from the components that turn.
Make sure guards that turn are free.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 9
Do not make adjustments to the roll tension with the header engaged.
GUID-F38524AD-E24F-4FCC-9154-E5357EFDE9D2 [V3]
GUID-9398BDE6-F83A-4855-B266-E86D0B48B9D7 [V5]
1. Safety
14 9108 VE (70 cm) Planter
700208462A

When you make adjustments to the roll pressure, stop the header. Lower the header to the ground and
engage the park brake. Set the engine to low idle.
Do not make adjustments to the roll tension with the header engaged.
When you make adjustments to the roll pressure, stop the header. Engage the park brake.
1.2.6 Exhaust warning
Do not operate the engine in a closed building
unless the exhaust is vented to the outside.
Do not tamper with or modify the exhaust system
with unapproved extensions.
GUID-55072A39-D882-4355-8ABA-05660F3F6EDA-high.jpg [High]
Fig. 10
1.2.7 Flying debris
WARNING:
Be careful when you operate along
the side of a road or structures. Rocks
and other materials can be thrown
from the machine during operation
and can cause injury.
If there are rocks and unwanted
objects in a field, tilt the header up.
This will lift the knives and reduce
other materials thrown by the knives.
Stay away from the machine during operation.
Some materials can be thrown from the machine
during operation and cause injury. GUID-1D480E10-339B-427D-9D05-37E84CC7A29A-high.jpg [High]
Fig. 11
1.2.8 Handrails
Point your body in the direction of the ladder and
use the handrails when you are on the machine
ladders.
GUID-B4BF5956-B0F7-43A5-85C1-706D96BCA02B-high.jpg [High]
Fig. 12
GUID-AC6BA923-B398-43F4-BFAE-5130AFED6FC5 [V3]
GUID-3910D764-BEA7-4A1B-80BF-946E438C6212 [V5]
GUID-DAAB4281-F045-467E-97A1-20DFD2BB692C [V3]
1. Safety
9108 VE (70 cm) Planter 15
700208462A

1.2.9 Agricultural chemicals
Agricultural chemicals are very dangerous. Incorrect procedures with fertilizer, fungicides, herbicides,
insecticides and pesticides can cause injuries to plants, animals, soil and other persons property.
Always read and follow all manufacturers instructions before you open chemical containers.
Read and follow instructions each and each time you use a chemical.
Use the same precautions when you do adjustments, servicing, clean or store the machine as used when
you put chemicals into the hoppers or tanks.
Tell all person who comes go near with chemicals of the possible dangerous results and the safety
precautions that are necessary.
Stay upwind and away from smoke from a chemical fire.
Store or discard all chemicals that are not used only in the procedure specified by the chemical
manufacturer.
GUID-A494D2FA-1956-40C4-9743-052166A2A431 [V3]
1. Safety
16 9108 VE (70 cm) Planter
700208462A

1.3 Travel on public roads
Make sure you understand the speed, brakes,
steering, stability, and load characteristics of this
machine before you travel on public roads.
Use good judgment when traveling on public
roads. Maintain complete control of the machine
at all times. Never coast down hills.
The maximum speed of farm equipment is
governed by local regulations. Adjust travel speed
to maintain control at all times. See the
specifications for the maximum speed for this
machine.
Make sure the tractor is in the proper operating
condition according to the tractor operator manual.
Make sure the tractor brakes and the machine
brakes, if equipped, are adjusted correctly. The
tractor must have enough weight and braking
capacity, especially when operating on roads and
terrain that is not even. To achieve proper braking
capacity, use tractor of recommended size and
weight to tow the machine. See the machine
specifications for the minimum tractor weight.
GUID-657D3002-48DB-436B-9B56-D3750095397D-high.jpg [High]
Fig. 13
Familiarize yourself with and obey all road regulations that apply to your machine. Consult your local law
enforcement agency for local regulations regarding movement of farm equipment on public roads. Use
head lamps, flashing warning lamps, tail lamps and turn signals, day and night, unless prohibited by local
law.
Make sure all the flashers are operating prior to driving on the road. Make sure reflectors are correctly
installed, in good condition, and wiped clean. Make sure the Slow Moving Vehicle (SMV) emblem is clean,
visible, and correctly mounted on the rear of the machine.
Be aware of other traffic on the road. Keep well over to your own side of the road and pull over, whenever
possible, to let faster traffic pass.
Be aware of the overall width, length, height, and weight of the machine. Be careful when transporting the
machine on narrow roads and across narrow bridges.
If equipped, always install the safety transport chain between the implement and the tractor drawbar.
• Use a safety transport chain with a strength rating equal to or more than the gross weight of the towed
machines.
• Connect the safety transport chain to the tractor drawbar and use a retainer on the hitch pin.
• Supply only enough slack in the safety transport chain to permit turning.
• Do not use the safety transport chain as a tow chain for towing.
Put the tongue in roading position and close the steering cylinder lockout valves. Raise the header all the
way and close the lift cylinder lockout valves.
Install the marker lockup pins before transporting or parking the machine.
Install the wheel cylinder lockup channels before transporting or parking the machine.
Vertical fold models: Always install the wing lockup pins before transporting or parking the machine.
GUID-FE6F4C1C-E54F-4F8A-B0DD-7BB1FFF31C41 [V2]
1. Safety
9108 VE (70 cm) Planter 17
700208462A

Watch for overhead wires and other obstructions.
Avoid contact with electrical power lines. Contact
with electrical power lines can cause electrical
shock, resulting in very serious injury or death.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 14
1. Safety
18 9108 VE (70 cm) Planter
700208462A

1.4 Maintenance
1.4.1 General maintenance information
Before you do maintenance, lubricate, do the
servicing, clean, or make adjustments:
• Park the machine on a solid, level surface.
• Disengage the tractor power take-off.
• Make sure that all the controls are in the
neutral position and apply the park brake.
• Make sure that the machine and the
attachments are lowered to the ground.
• Stop the engine and take the key with you.
• Apply the baler flywheel brake.
• If the machine has a park brake, apply the baler
park brake.
• Look and Listen! Make sure that all parts that
move are stopped.
• Put chocks in front of and behind the wheels of
the machine before you do work on or below
the machine.
GUID-DB4C2E27-9DAC-4734-83E4-BC4BB5C26EAF-high.jpg [High]
Fig. 15
Stay near the machine when the tractor or machine engine is in operation.
Do not pull the crop, twine, or other object from the machine while the machine engine is in operation.
Parts that move can pull you into the machine before you can move out of the way.
Know the dimensions and weight of parts when you do the servicing. Do not stand below or near a part
while it is moved with a hoist or other lift equipment.
Do a check on the disc and knife bolts torque regularly, and when you hit objects in the field. See the
machine specifications for correct knife bolt torque.
After you do work on the machine, remove all tools from the machine.
Make sure that electrical connectors are clean before you connect them.
Do a check for loose, broken, missing, or damaged parts. Make sure that the machine is in good repair.
Make sure that all guards and shields are in position.
Always lift the machine, stop the tractor engine, apply the park brake, move to park position (or neutral)
remove the key and install the cylinder stops channels before you do work around the machine.
Do not go below the machine. If you must go below the machine, make sure that the machine blocked and
the cylinder lockup channels are in position.
Discs have sharp edges, be careful when you do work around the discs.
Discs and shanks have sharp edges, be careful when you do work around the discs and the shanks.
[V]
GUID-93C8628D-B392-4191-80DB-7D54BDAAF61B [V11]
1. Safety
9108 VE (70 cm) Planter 19
700208462A

Do not do the servicing, check or adjust chains or
belts while the engine is in operation.
GUID-7D1C9640-D737-4F38-8886-F1D2280DF613-high.jpg [High]
Fig. 16
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that turn can cause injury or death.
Stay clear of components that turn.
Make sure that guards that turn can turn freely.
A loose yoke can come off a shaft and result in
injury to persons or damage to the machine.
When you install a quick disconnect yoke, the
spring activated locking pins must move freely and
be in the groove on the shaft. Pull on the driveline
to make sure that the quick disconnect yoke can
not be pulled off the shaft. GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 17
Remove spilled oil, antifreeze or fuel immediately
from the steps, platform, and other access areas.
Keep all access areas clean of unwanted materials.
GUID-3B306DB1-0777-4FA6-86F1-895652B4C1DB-high.jpg [High]
Fig. 18
When you do work on the machine, make sure
that the header and the reel are lowered.
When it is necessary for the header or the reel to
be in the up position, lift the header or reel to the
full up position and engage the cylinder stops.
WARNING:
Lift the machine has lift cylinder
stops, install the header lift cylinder
stops, when you do work near the
header. Do not use the hydraulic
system to keep the header in the up
position. A sudden loss of hydraulic
pressure can cause the header to fall
suddenly.
GUID-353ABA0B-44F7-4320-8E22-3E3CA612BD91-high.jpg [High]
Fig. 19
1. Safety
20 9108 VE (70 cm) Planter
700208462A