NAMCO PAC-MAN BATTLE ROYALE DELUXE User manual

PAC-MAN BATTLE ROYALE DELUXE
OPERATION MANUAL

To ensure safe operation of the game machine, be sure to read this Operation Manual before use.

Keep this Operation Manual in a safe place for quick access whenever needed.
The actual product may differ slightly from the illustrations in this manual.
WARNING

Read PRECAUTIONS and INSTALLATION
Sections before operating game
IMPORTANT
RF Notice
Note: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operating in a
commercial environment. This equipment uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Copyright 2011 NAMCO AMERICA INC.
All rights reserved
No part of this publication may be reproduced by any mechanical photographic,
or electronic process, or in the form of a photographic recording, nor may it be
stored in a retrieval system, transmitted, or otherwise copied for public or private
use, without permission from NAMCO AMERICA INC.

INTRODUCTION
Thank you for purchasing the “PAC-MAN BATTLE ROYALE” game machine (hereinafter referred to as the
“machine”).
This operation manual describes:
● How to install, operate, relocate, transport, service, and discard the machine safely
and properly
● How to operate the machine correctly and make full use of its features
● How to ensure the safety of players and bystanders
Inquiries regarding this machine and its repair
● For further information about the machine and its repair, contact your distributor.
The software included in the machine is protected by copyright laws. The software may not
be copied, modied, distributed publicly, or used for purposes other than the operation of this
game machine. Violators of copyright laws may be subject to criminal penalties. Do not use
the storage media containing software in any other game machine; doing so may cause that
machine to malfunction.
This machine uses the following licenses.
Fonts used in-game are provided by Bitstream Inc. All rights reserved.
Copyright © 1997 - 2002, Makoto Matsumoto and Takuji Nishimura, All rights reserved.
Redistribution and use in source and binary forms, with or without modication, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. The names of its contributors may not be used to endorse or promote products derived from
this software without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
“AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

INTRODUCTION
NOTES

1
1. SAFETY PRECAUTIONS
– Be sure to read this section before installing or operating the machine. –
Instructions to the owner
z
Ifzyouzentrustzanotherzpartyztozperformzinstallation,zoperation,zrelocation,z
transportation,zservice,zorz discardingzofzthezmachine,z instructz thezconcernedzpartyz
tozreadzandzobservezallzthezinstructionszandzprecautionszinzthiszoperationzmanualz
regardingzthezparticularzactionztozbeztaken.
1-1 Magnitudes of risk
Onzthezlabelszattachedztozthezmachinezandzinzthiszoperationzmanual,zprecautionsz
regardingzsafetyzandzpropertyzdamagezarezclassiedzaszshownzbelowzinzaccordancez
withzthezmagnitudezofzthezparticularzrisk.
WARNING
:Failure to avoid the indicated risk may result in
deathorseriousinjury.
CAUTION
 :Failure to avoid the indicated risk may result in
minorinjuryorpropertydamage.
Noteszrelatedztozmachinezfunctionszbutznotztozsafetyzarezmarkedzwithzthezfollowingz
indication.
z ●zNotezrelatedztozproductzfunctionzorzprotection.
1-2 Denition of “technician”
Thiszoperationzmanualziszwrittenzforzarcadezpersonnel.zHowever,zthezsectionszmarkedz“Toz
bezconductedzbyzaztechnicianzonly”zinztheztablezofzcontentszarezwrittenzforztechnicians.z
Theseztaskszshouldzbezconductedzbyztechnicianszonly.
Technician:zzAzpersonzengagedzinzmachinezdesign,zmanufacture,zinspectionzorz
servicezforzazmanufacturerzofzamusementzequipment,zorzazpersonzwhoz
hasztechnicalzknowledgezrelatedztozelectricity,zelectronicszorzmechanicalz
engineeringzatz az levelz equalztozorzhigherzthanzthatz ofz aztechnicalzhighz
schoolzgraduatezandzwhoziszengagedzroutinelyzinzthezservicezandz
managementz(includingzrepair)zofzamusementzmachines.

1. SAFETY PRECAUTIONS
2
1-3 Critical safety precautions
WARNING
 Should any abnormality occur, turn off the power switch immediately to stop
operating the machine. Then, unplug the power cord plug from the AC outlet.
Operating the machine without correcting abnormalities can result in a fire or
accident.
 Some monitor sections remain hot or charged with high voltage even after the power
switch is turned off. Do not touch the monitor unnecessarily in order to avoid electric
shock and burns.
 Dust accumulated on the power cord plug may cause a re. Check the power cord
plug regularly and remove dust.
 Insert the power cord plug firmly into the AC outlet. Poor contact may cause
overheating that can lead to a re or burns.
 A damaged power cord can cause a re, electric shock or electrical leakage. Observe
the following cautions.
•Keep the power cord away from heating devices.
•Do not twist the power cord.
•Do not bend the power cord forcibly.
•Do not alter the power cord.
•Do not bundle the power cord.
•Do not pull the power cord. (Always unplug by holding the power cord plug, and
avoid pulling the power cord.)
•Do not place anything on the power cord.
•Do not allow the power cord to be caught under or between the machine, other
equipment or the wall.
•Do not do anything else that might damage the power cord.
 Do not wet the power cord or power cord plug with water. Water can cause an electric
shock or electrical leakage.
 Do not touch the power cord plug with a wet hand. Doing so can result in an electric
shock.
 The machine’s rated power supply voltage and maximum consumption current are
120 V AC, 2 A, respectively. To prevent re and electric shock, be sure to use interior
wiring that conforms to these power supply specications.
 Operate the machine with a power supply voltage in the range of 104 to 127 V AC.
Operating the machine with a supply voltage outside the specied range may cause
a re or electric shock. To ensure that the machine operates in optimum condition,
maintain the power supply at 120 V AC.
 To ensure safe operation of the machine, be sure to conduct the pre-service check
(See P. 15 “7-1 Pre-service check”) and service (See P. 44 “8B. SERVICES”) described
in this manual. Failure to conduct the pre-service check or service can result in an
accident.
 Use consumables and service parts (including fasteners) specied by our company.
To order parts, contact your distributor.
 Do not convert the machine without permission. Do not perform any work that is not
described in this operation manual. Unauthorized conversion of the machine may
create unforeseen hazards.
 When transferring ownership of the machine, be sure to provide this operation
manual with the game machine.

1. SAFETY PRECAUTIONS
3
1-4 Description of warning labels attached to the machine
WARNING
 The warning labels describe important safety precautions. Be sure to observe the
following:
•To ensure that the warning labels attached to the machine are easily legible, install
the machine at an appropriate location with ample illumination and keep the labels
clean at all times. Also, make sure that the labels are not hidden behind another
game machine or other objects.
•Do not remove or alter the warning labels.
•If the warning labels become excessively dirty or damaged, replace them with new
labels. To order warning labels, contact your distributor.
Warningzlabels
VG44-12423-00

4
CONTENTS
INTRODUCTION
1. SAFETY PRECAUTIONS
– Be sure to read this section before installing or operating the machine. – ..................................................................... 1
1-1 Magnitudesofrisk...........................................................................................................................................1
1-2 Denitionof“technician”................................................................................................................................. 1
1-3 Criticalsafetyprecautions...............................................................................................................................2
1-4 Descriptionofwarninglabelsattachedtothemachine..................................................................................3
2. SPECIFICATIONS ...................................................................................................................................... 6
3. PACKAGE CONTENTS ............................................................................................................................. 8
4. OVERALL CONSTRUCTION (Names of Parts) ....................................................................................... 9
5. INSTALLATION .........................................................................................................................................10
5-1 Installationconditions...................................................................................................................................10
5-1-1 Locationstoavoidwheninstallingthemachine.................................................................................. 10
5-1-2 Playzoneforinstalledmachine.......................................................................................................... 11
5-2 Requireddimensionsforbringingthemachineinside(suchasdoorsandcorridors).................................. 11
6. MOVING AND TRANSPORTING .............................................................................................................12
6-1 Moving(ontheoor).....................................................................................................................................12
6-2 Transportation............................................................................................................................................... 13
6-2-1 Manualtransportation(carryingonstairs,etc.).................................................................................. 13
7. OPERATION ..............................................................................................................................................14
7-1 Pre-servicecheck......................................................................................................................................... 15
7-1-1 Safetycheck(beforepowerON)........................................................................................................ 15
7-1-2 Operationcheck(afterpowerON)...................................................................................................... 16
7-2 Explanationofthepowerswitchandadjustmentswitches...........................................................................17
7-2-1 Turningthepowerswitchon............................................................................................................... 17
7-2-2 Adjustmentswitchesandbuttons....................................................................................................... 18
7-3 HowtoplayPAC-MANBATTLEROYALE.................................................................................................... 19
7-3-1 Gamerules......................................................................................................................................... 19
7-3-2 HowtocontrolyourPac-Man............................................................................................................. 19
7-3-3 Itemsandastrategyinthemaze........................................................................................................ 19
7-3-4 STARTbutton.....................................................................................................................................20
7-4 Testmode.....................................................................................................................................................21
7-4-1 Descriptionofthemenuscreen(MENU)............................................................................................ 21
7-4-2 Gamefeesettings(COINOPTIONS).................................................................................................22
7-4-3 Gamedetailsettings(GAMEOPTIONS)............................................................................................ 24
7-4-4 Switch/sensortest(I/OTEST)............................................................................................................25
(1) SWITCHTEST..............................................................................................................................26
(2)OUTPUTTEST.............................................................................................................................27
7-4-5 Monitorconditiontest(MONITORTEST)...........................................................................................28
7-4-6 Soundadjustment(SOUNDTEST)....................................................................................................29
7-4-7 Gamedatadisplay/initialization(BOOKKEEPING).............................................................................30
(1) ERRORLOG................................................................................................................................ 31
7-4-8 Initializationandothersettings(OTHERS)......................................................................................... 32
(1) CLOCKSETTING.........................................................................................................................33
(2)BACKUPMEMORYINITIALIZE...................................................................................................34
7-5 Errordisplay(forthearcadeoperator)..........................................................................................................35

CONTENTS
5
8A. ASSEMBLY AND SETUP – To be conducted by a technician only – .......................................................................36
8A-1Assembly......................................................................................................................................................36
8A-1-1 Securingthemachineusingleveladjusters.......................................................................................36
8A-1-2 Removingandattachingthesideservicedoor..................................................................................36
8A-1-3 AssemblingthePACMANBATTLEROYALEDELUXE...................................................................... 37
8B. SERVICES – To be conducted by a technician only – ...................................................................................................44
8B-1Inspectionsandservices.............................................................................................................................. 44
8B-1-1 Inspectionitems..................................................................................................................................44
8B-2Troubleshooting............................................................................................................................................45
8B-2-1 General...............................................................................................................................................46
8B-2-2 Monitorassembly...............................................................................................................................46
8B-2-3 Uprightassembly................................................................................................................................ 46
8B-2-4Pedestalassembly............................................................................................................................. 47
8B-2-5Marqueeassembly............................................................................................................................. 47
8B-3Errordisplay(forthetechnician)...................................................................................................................48
8B-4Accessingcomponentsofthemachine........................................................................................................49
8B-4-1Uprightassembly................................................................................................................................49
(1)ReplacingtheMAINPCB..............................................................................................................49
(2)ReplacingthebackupbatteryontheMAINPCB..........................................................................50
(3)ReplacingtheI/OPCB.................................................................................................................. 51
(4)ReplacingtheA.I.PCB................................................................................................................. 52
(5)ReplacingtheAMPPCB...............................................................................................................53
(6)Replacingthepowersupply..........................................................................................................54
8B-4-4Pedestalassembly.............................................................................................................................55
(1) AccessingtheControlPanelarea.................................................................................................55
(2)Replacingthejoystick...................................................................................................................56
(3)ReplacingtheilluminatedswitchanditsLEDlamp.......................................................................57
8B-4-5Signboardassembly...........................................................................................................................58
(1) Replacingtheuorescentlamp.....................................................................................................58
9. DISPOSAL OF THE MACHINE ............................................................................................................... 59
10. PARTS LISTS ......................................................................................................................................... 60
10-1 ControlStandParts(Pedestal).....................................................................................................................60
10-2 BaseAssy.Left............................................................................................................................................62
10-3 BaseAssy.Right...........................................................................................................................................63
10-4 Uprightassembly..........................................................................................................................................64
10-5 MarqueeBoxassembly................................................................................................................................ 65
10-6 Monitorassembly..........................................................................................................................................66
10-7 Electricalassembly.......................................................................................................................................67
11. WIRING DIAGRAMS .............................................................................................................................. 69

6
2. SPECIFICATIONS
(1) Rated power supply: US 120 ± 10% V AC (60 Hz) - UK 240 + 10% VAC (50Hz)60
(2) Maximum power consumption: 600W
(3) Maximum current consumption: 5 A (120 V AC power supply) 2.5 A (240 V AC power supply)
(4) Coin box capacity: Approx. $750 in coins (3,000 25-cent coins)
(5) Display device: LCD monitor (54 -inch screen)
(6) Dimensions
As installed:
(7) Weight
95 x 86 x 115 in. (2,413 x 2,184 x 2,921 mm) (W x D x H)
1050 lbs.
Left Side View
.. Cabinet:
86 “
39 “
115 “

2. SPECIFICATIONS
7
Top View
 Cabinet: 95 x 86 x 115 in. (2,413 x 2,184 x 2,921 mm) (W x D x H)
Front View
 Cabinet:
95 “
115 “
60”
95 “

8
3. PACKAGE CONTENTS
The product packages shipped from the factory contain the following components and parts.
 Make sure that all the items listed below (except the service key)
are contained in the coin box.
 If any item is missing, contact your distributor.
 Accessory list
No. Name Specication Qty.
1 Operation Manual
Operation Manual
1
2 Service key 2
3 Coin box key 2
4 Power cord 1

9
4. OVERALL CONSTRUCTION (Names of Parts)
 Front
Power switch
Fuse(5A 250V)
Fluorescent lamps
(inside)
Marquee
Bill acceptor
(option) X4
Coin Acceptor
X4
Control Panel assembly
(1P, Red) Control Panel assembly
(2P, Yellow)
Control Panel assembly
(3P, Pink)
Control Panel assembly
(4P, Blue)
Cord box

10
5. INSTALLATION
WARNING
 Install the machine according to the instructions and procedures specied in this
operation manual. Failure to follow the specified procedures may result in a fire,
electric shock, injury or machine malfunctions.
 Insert the power cord plug firmly into the AC outlet. Poor contact may cause
overheating that can lead to a re or burns.
 Install the machine securely by using the level adjusters. Unstable machine
installation can result in an accident or injury. (See P. 36 “8A-1-1 Securing the
machine using level adjusters.”)
5-1 Installation conditions
5-1-1 Locations to avoid when installing the machine
WARNING
 The machine is designed for indoor use. Never install the machine outdoors or in any
of the following places:
•A place subject to direct sunlight
•A place exposed to rain or water leakage
•Damp place
•Dusty place
•A place close to heating devices
•Hot place
•Extremely cold place
•A place where dew condensation may occur due to temperature differences
•A place where the machine may become an obstruction in emergencies (such as
near an emergency exit) or a place where a re extinguisher or similar equipment
is installed
•Unstable place or location where vibrations are produced

5. INSTALLATION
11
Play zone
16 inches or more
16 in. or
more
16 in. or
more
5-1-2 Play zone for installed machine
WARNING
 Create a play zone around the machine (space as shown below) to prevent players
coming into contact with bystanders or passers-by.
 The distance from the oor to the ceiling must be at least 10.6 ft.
(3 m 23 cm).
5-2 Required dimensions for bringing the machine inside (such
as doors and corridors)
The machine is divided into separate components at the factory before shipping.
Because of its size, the machine can not be moved fully assembled. The dimensions of
main components are as follows:
As installed:
95 x 86 x 115 in. (2,413 x 2,184 x 2,921 mm) (W x D x H)
Disassembled:
Base Right: 37.89 x 68.13 x 6.58 in. (962.28 x 1730.54 x 167.17 mm) (W x D x H)
Weight: Approx. 85 lb. (38.5554 kg)
Base Left: 38.69 x 68.13 x 6.58 in. (982.60x 1730.54 x 167.17 mm) (W x D x H)
Weight: Approx. 103 lb. (46.72 kg)
Upright: 44.75 x 11.46 x 52 in. (1136.55 x 291.01 x 1320.80 mm) (W x D x H)
Weight: Approx. 115 lb. (52.163 kg)
Marquee: 56 x 6.20 x 23.75 in. (1422.40 x 157.50 x 603.75 mm (W x D x H)
Weight: Approx. 62 lbs (28.1227kg)
Monitor: 60 x 7.26 x 38.7 in. (1524 x 184.404 x 982.98 mm) (W x D x H)
Pedestals: 20 x 21 x 39 in. (508 x 533 x 991 mm) (W x D x H)
Doors and corridors must be sufficiently higher and wider than the component
dimensions indicated above.

12
6. MOVING AND TRANSPORTING
WARNING
 Do not leave the machine on a slope. If the machine is left on a slope, it may tip over
and cause an accident.
6-1 Moving (on the oor)
 Carefully transport the machine so as not to cause excessive
impacts to it, as the LCD monitor is a precision electronic
component.

6. MOVING AND TRANSPORTING
13
6-2 Transportation
6-2-1 Manual transportation (carrying on stairs, etc.)
WARNING
 When moving, always separate the machine into parts. (See P. 11 “5-2 Required
dimensions for bringing the machine inside (such as doors and corridors).”)
 When carrying the machine manually, the following number of people are needed.
Attempting to carry the machine with fewer people can result in an accident or injury.
Right Base assembly: Left Base Assembly:
Upright Assembly: Monitor Assembly
Marquee Assembly Pedestal Assembly (X4)

14
7. OPERATION
WARNING
 Some monitor sections remain hot or charged with high voltage even after the power
switch is turned off. Do not touch the monitor unnecessarily in order to avoid electric
shock and burns.
 Dust accumulated on the power cord plug may cause a re. Check the power cord
plug regularly and remove dust.
 Insert the power cord plug rmly into the AC outlet. Poor contact may cause
overheating that can lead to a re or burns.
 Be sure to check that the machine has been installed according to the instructions
and procedures specied in this operation manual (See P. 10 “5. INSTALLATION.”)
before operating the machine. If the machine is not installed properly, re, electric
shock, injury or equipment malfunction can occur.
 The warning labels describe important safety precautions. Be sure to observe the
following:
•To ensure that the warning labels attached to the machine are easily legible,
install the machine at an appropriate location with ample illumination and keep
the labels clean at all times. Also, make sure that the labels are not hidden behind
another game machine or other objects.
•Do not remove or alter the warning labels.
•If the warning labels become excessively dirty or damaged, replace them with new
labels. To order warning labels, contact your distributor.
 To ensure safe operation of the machine, be sure to conduct the pre-service check
(see P. 15 “7-1 Pre-service check”) and Service (see P. 44 “8B. SERVICES”) described
in this manual. Failure to conduct the pre-service check or service can result in an
accident.
CAUTION
 If a player becomes sick due to light stimulation or game images, have that person
stop playing the game immediately and let him/her rest.
 In rare cases, stimulation by lights or video images can cause convulsions or a loss
of consciousness. If this happens, advise the player to consult a doctor as soon as
possible. When pre-school children play, request their parents or guardians to keep
an eye on the children.

7. OPERATION
15
7-1 Pre-service check
7-1-1 Safety check (before power ON)
WARNING
 To prevent accidents and injury, be sure to conduct the pre-service check described
below before commencing operation.
(1) Areallwarningindicationsinplace?(SeeP.3“1-4Descriptionofwarninglabels
attachedtothemachine.”)
(2) Arethewarningindications legible? (See P. 3 “1-4 Descriptionof warning labels
attachedtothemachine.”)
(3) Areallleveladjustersadjustedproperly?(SeeP.36“8A-1-1Securingthemachine
usingleveladjusters.”)
(4) Isthespecifiedplayzoneprovided?(SeeP.11“5-1-2Playzoneforinstalled
machine.”)
(5) Isthepowercordroutedsothatitwillnotcauseplayersorothercustomerstotrip
overit?
(6) IsthepowercordsecurelyconnectedtotheACoutletandthepowerinputsocket
onthemachine?
(7) Isthepowercordplugfreeofdust?
(8) IstheMonitorsecurelyattachedtotheUprightassembly?
(9) IstheMarqueesecurelyattachedtotheMonitorAssembly?
(10)IstherearcoversecurelyattachedtotheUprightassembly?
Checkthefollowingitemsafterturningonthepowerswitch.Ifanabnormalityisfound,
turnoffthepowerswitchimmediatelytostopoperatingthemachine.Then,unplugthe
powercordfromtheACoutletandcontactyourdistributor.
(11)Isanypartofthepowercordorplugabnormallyhot?
(12)Doestouchingthemachinegiveanelectricshock?
(13)Isthereaburningsmell,abnormalnoiseorvibration?
(14)Isthereanyothersignofabnormalityormalfunction?


16
7. OPERATION
7-1-2 Operation check (after power ON)
CheckthefollowingitemsinTestmode.(SeeP.18“7-2-2Adjustmentswitchesandbut-
tons.”)
(1) Checkthelampsforproperoperation.(DotheuorescentbulbandStartbuttons
light?)
 (SeeP.25“7-4-4Switch/sensortest(I/OTEST).”)
(2) ChecktheStartbuttonsforproperoperation.
 (SeeP.25“7-4-4Switch/sensortest(I/OTEST).”)
(3) Checkthedisplayedimage.(Doesthemonitorshowimagesproperly?)
 (SeeP.28“7-4-5Monitorcondition(MONITORTEST).”)
(4) Checkthesound.(Issoundproducedbyeachloudspeaker?)
 (SeeP.29“7-4-6Soundadjustment(SOUNDTEST).”)
(5) Checktheclock.
 (SeeP.33“7-4-8(1)CLOCKSETTING.”)