Nav TV OPV-1R User manual

OPV-1R
Audio Video Interface for Range Rover: 2005 and Up.
What’s in the box Package Contents
1. Optical Audio Interface
2. Video-In-Motion Interface
3. Optical Audio Interface Harness
4. Y- Harness for In-Motion Interface
5. Fakra to RCA Cable
6. Optical Cable
Range Rover Radio Removal Dash Image
Remove Navigation screen and
Radio Tuner to begin install.
Unplug screen and radio tuner and
set it aside.
100 NW 11
TH
Street, Boca Raton, FL 33432
Tel. [phone] Fax. [phone]
www.nav-tv.com [email protected]
OPV-1R 8-21-2008
Rev 1.0 Mark Ryan
1 | Page

Optical Cable Connections
Plug everything back in making sure that all optical leads are locked into place and that the locks
themselves are in place.
Power Connections
Connect the Red wire from the Optical
Audio Harness to the Green/White wire on
the In-Motion Harness.
Connect the Black wire from the Optical
Audio Harness to the Black wire on the In-
Motion Harness (Strip back the Black wire
on the In-Motion Harness and solder the
black wire from the Optical Audio Harness
to it).
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of urchase.p
This product is intended for off-road use and passenger entertainment only.
2 | Page