Nav TV BMW12-SMART User manual

䈀䴀圀㄀㈀ⴀ匀䴀䄀刀吀
匀䬀唀⌀ 一吀嘀ⴀ䬀䤀吀㤀㜀㈀
一吀嘀ⴀ䬀䤀吀㤀㜀㈀
䈀䴀圀㄀㈀ⴀ匀䴀䄀刀吀
匀挀愀渀 儀刀 昀漀爀 氀愀琀攀猀琀
椀渀猀琀愀氀氀 洀愀渀甀愀氀㨀
一吀嘀ⴀ䐀伀䌀 ㌀㔀㜀
䐀匀 䨀甀氀礀 㘀Ⰰ ㈀ ㈀
眀眀眀⸀渀愀瘀琀瘀⸀挀漀洀 ㄀ⴀ㠀㘀㘀ⴀ㐀㜀㜀ⴀ㌀㌀㌀㘀

Dip Switch sengs*
Dip SW: 1 2 3 4 5 6 7 8 9 10
UP
KEEP
VEH
SETTING
DOWN
AFTERMARKET
CAN
SPEED KEEP
DOWN
Dip Switch Configuraon
2013: 1 & 3 series (version 1)
8.8” screen
2014:> X3, 1,2,3 series & acve tourer
6.5” screen
2014+: 3, 5, 7 series
8.8" / 10.2” screen
2014: MINI
8.8” screen 2015: MINI
6.5” screen
2015: X5,X6,X3,X2, 2016 MINI
8.8” /10.2” screen
2016: 1, 2, 3, 4 series
6.5” screen
12 - 15 : X3 & 1,3 series
6.5” screen
2013: X3 & 1, 3series (version 2)
8.8” screen
DOWN
KEEP
UP
KEEP
UP
CAM
CAM
OEM
VEH
SETTING
VEH
SETTING
VEH
SETTING
FOR CERTAIN CARS YOU WILL HAVE TO TRIGGER THE REVERSE VIA THEFOR CERTAIN CARS YOU WILL HAVE TO TRIGGER THE REVERSE VIA THE
GREEN WIRE TO THE REAR REVERSE LAMP (IN CERTAIN CASE THIS MAY ALSO GREEN WIRE TO THE REAR REVERSE LAMP (IN CERTAIN CASE THIS MAY ALSO
REQUIRE A RELAY)REQUIRE A RELAY)
FOR CERTAIN CARS YOU WILL HAVE TO TRIGGER THE REVERSE VIA THE
GREEN WIRE TO THE REAR REVERSE LAMP (IN CERTAIN CASE THIS MAY ALSO
REQUIRE A RELAY)
*Note: Remove power to the unit prior to making adjustments to the dip switches.
2016: 4 series
8.8” screen

一吀嘀ⴀ䬀䤀吀㤀㜀㈀
䈀䴀圀㄀㈀ⴀ匀䴀䄀刀吀
匀挀愀渀 儀刀 昀漀爀 氀愀琀攀猀琀
椀渀猀琀愀氀氀 洀愀渀甀愀氀㨀
眀眀眀⸀渀愀瘀琀瘀⸀挀漀洀 ㄀ⴀ㠀㘀㘀ⴀ㐀㜀㜀ⴀ㌀㌀㌀㘀

PLEASE SET WIFI AND BLUETOOTH “ON” AT SETTING OF IPHONE,
AND THEN PLEASE SEARCH DEVICE “CARPLAY-BT” IN BLUETOOTH
PIN CODE IS “0000”. PLEASE FILL IN PIN CODE AND SELECT “PAIR”.
PLEASE SELECT “USE CARPLAY” AFTER PAIRING.
VIP 01
PAIRING OPTION FOR IOS

OPERATION
FOR AUDIO - select “AUX” in the BMW “MULTIMEDIA” menu.
TO SELECT the Smartlink interface - press and hold the “MENU” button
for 2-3 secs.
MAIN
SMARTLNK
MENU
Now select either “CarPlay” or Android
MAIN
CarPlay
MENU
MAIN
ANDROID
MENU
Now use the familiar user interface to select various options .

SELECT AUTO PHONE CONNECT THEN
(LEFT OR RIGHT)
WILL CHANGED
SELECT WIRELESS CARPLAY “ON” TO
ACTIVE WIRELESS CONNECTING
YOUR SMART PHONE AUTOMATICALLY
LANGUAGE SETTING
BAR OF CARPLAY

BRIGHTNESS SETTING
IN NETPLAY MAIN MENU ONLY
RESET & UPDATE NETPLAY
VOLUME SETTING
ANDROID

HOLD “MENU” BUTTON OF IDRIVE CONTROLLER OVER 10 secs
IN SMARTLINK MODE CAN RESET SMARTLINK AS WELL.
HOW TO UPDATE
2. 1) INSERT USB MEMORY CARD INTO USB PORT
2) ENTER TO SETTING OF SMARTLINK
3) SELECT “SYS UPDATE”
4) NETPLAY WILL REBOOT ITSELF, THEN PLEASE
DISCONNECT USB MEMORY CARD WHEN YOU SEE MAIN MENU
THERE ARE 2 WAYS TO UPDATE SMARTLINK AS BELOW :
1. 1) INSERT USB MEMORY CARD INTO USB PORT
2) CONNECT POWER CABLE
3) SCREEN WILL SHOW “UPDATING...” IN SMARTLINK
4) NETPLAY WILL REBOOT ITSELF, THEN PLEASE
DISCONNECT USB MEMORY CARD WHEN YOU SEE MAIN MENU

ADJUSTMENTS
FRONT CAMERA / VIDEO INPUT
SETTING
Mar 28 2016
FRONT CAMERA OFF
5 Sec
ON
CVBS
ON
ON
OEM FRONT CAMERA
RTC
REAR SEL
V MOTION
QUICK MENU
SETTING
Mar 28 2016
OFF
5 Sec
7 Sec
9 Sec
11 Sec
OFF : DO NOT USE FRONT CAMERA
5 Sec : DISPLAY FRONT CAMERA INPUT FOR 5 SECONDS
7 Sec : DISPLAY FRONT CAMERA INPUT FOR 7 SECONDS
9 Sec : DISPLAY FRONT CAMERA INPUT FOR 9 SECONDS
11 Sec : DISPLAY FRONT CAMERA INPUT FOR 11 SECONDS
TO SET UP FRONT CAMERA FUNCTION
1. First set dip switch 1 to “ON” (on the interface), then unplug and re-plug the power harness.
2. Select the video option by pressing the “MENU” button for 2-3 seconds, this will then display the
screen saying “NO GPS”.
3. You will have to enter “VIDEO MENU”, please see next page how to enter “VIDEO MENU”. Once you
are in the “VIDEO MENU” you will see the display as (FIG 1) use the cursor right in the remote control
until you get to the “SETTINGS” Menu (FIG 2) and set your preferences.
once you have done this please press the “POWER” button to save the changes. Press the “MENU”
button again to return to the OEM menu.
1. By pressing the “MENU” button on the steering wheel for 2-3 secs (after initial set up)
2. Auto switching timed output when reverse is exited (after initial set up).
The front camera option can be selected in 2 ways.
ON : USE FOR FRONT CAMERA

ON SCREEN MENU (OSM)
VIDEO OSM is for the settings for Front Camera / AV1, Etc.
There are two type of OSM, these are shown as below:
Rear OSM is for the settings of the Rear Camera
REAR OSM VIDEO OSM
HOW TO ENTER SCREEN MENU (OSM)
REAR CAMERA MENU - to enter menu for REAR CAMERA - Please see below.
This will display the rear camera menu for you to make your adjustments.
VIDEO MENU - to enter menu for VIDEO - Please see below.
This will display the Video menu for you to make your adjustments.
HOLD “BACK” BUTTON OF IDRIVE CONTROLLER OVER 10 secs
TO ENTER THE ON SCREEN MENU

The purchaser and end user shall indemnify, defend and hold harmless NAV TV, its members,
managers, officers, directors, affiliated entities, agents and employees against all damages, claims,
liabilities, losses and other expenses including legal fees and costs, that in any way arise out of or
relate to the negligent or wilful acts or omissions of the purchaser and end user with respect to the
product and or operation of a vehicle which contains the product. Video in Motion (TV Free) products
are designed for passenger entertainment use only.

FOR TECH SUPPORT, PLEASE
CALL 1-866-477-3336 toll free USA
and Canada or [phone]
internationally. You may also email
us at [email protected].