Nav TV VTC-J User manual

VTC-J
Video in Motion for Jaguar XJL
NTV-KIT379
BHM
05/09/17
NTV-DOC189
3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

BHM
05/09/17
NTV-DOC189
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
Kit Contents
Overview
The VTC-J is a Plug and Play solution enabling video playback in motion for select 2011-2012
Jaguar XJL vehicles. No programming is necessary and all connections are made behind the
factory media screen.
Installation
1. Gain access to behind the factory media screen by removing trim panels. Disconnect any
harnesses and place the screen aside.
2. Find the main 16-pin factory LCD power/data connector and plug it into
the female end of the provided Plug & Play T-Harness.
3. Plug the VTC-J module into the 18-pin connector located on the T-harness from step 2.
4. Plug the male end of the T-Harness into factory LCD screen.
5. Reconnect all harnesses to the LCD, reinstall screen and test for proper operation.
*Note: Any wires not discussed here on the T-Harness are not used.
VIM Module
NTV-ASY166
USB Cable
NTV-CAB009
Plug and Play T-Harness
NTV-HAR269

BHM
05/09/17
NTV-DOC189
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 | P a g e
Operation
Video in Motion is activated automatically while the car is on, no user interaction is
necessary.
To test, play a video on the factory screen and drive the car. The video should continue working
normally in Drive.