2DECT modelG266ReferenceGuide
GETTING STARTED
Press and hold for a few seconds.
When the display of your phone is dark, press any key to activate your phone (phone in Idle
mode).
Press and then (toggle function).
1. Press and then type the number you want to reach OR
2. Press and then type the number you want to reach (speakerphone call) OR
3. Type the number you want to reach and then or OR
4. Use a speed dial key ( .. ) OR
5. Press soft key or , select the required contact and press soft key ,
or .
Press or, for speakerphone call, .
Press .
During a call, press and dial the number of the party you want to consult. Press
to toggle between the two parties.
Press to transfer the call.
During a call, press “Volume up” or “Volume down” on the side of the phone.
During a call, press ; to deactivate: press again.
Press soft key . To turn the microphone on again, press soft key .
In Idle mode, press soft key , select the contact you want to assign to a speed
dialling key and press soft key . Choose and press soft key .
Use the navigation keys to scroll to the appropriate number (2..9) and press soft key .
In Idle mode, press , use the navigation keys to select and press soft key .
Use the navigation keys to select (Connectivity)and press soft key . Use the
navigation keys to select (Register) and press soft key .
Enter the requested registration information (contact your System Administrator for this).
Wait for the registration to be completed.
