NEC MH110 User manual

NEC WIRELESS HANDSET MH110 Standby
menu item 2nd Level 3rd Level 4th Level
Lock Keys
Ring Options Telephone
Ring Ring Cadence Off
*PBX
Continuous
Short Pulse
Long Pulse
Ring Tone *Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Ring
Volume Bars
Vibrate
Cadence *Off
PBX
Continuous
Short Pulse
Long Pulse
Ring
Delay** *No Delay
5 Second Delay
10 Second Delay
Auxiliary
Ring 1
Auxiliary
Ring 2
Note: All Softkeys remain the same as PBX setting.
Phone
Options Noise Mode
*Normal
High
Severe
Key
Tones *Enable Tones
Disable Tones
Warning
Tones *Enable warnings
Disable warnings
Display
Contrast Contrast %
Keypad
Autolock *Disable
5 seconds
10 seconds
20 seconds
System Info Phone IP
Addr Displays current IP address assigned the handset and current
Alias IP address assigned to the
handset from the SVP server.
Server IP
Addr Displays the IP address of the SVP server and the spectralink OAI
server.
Firmware
Version Displays MAC address and version of handset
Identification Enter in name to identify your handset.
NEC options NEC PBX IP Displays IP address of the
PBX.
Displays port information.
Function key
display: Emulates fixed operation keys: Key sequence
1 Hold Hold FCN + 1
2 Transfer Transfer FCN + 2
3 Conf Conference FCN + 3
4 Recall Recall FCN + 4
5 Redial Redial FCN + 5
7 Directory Directory FCN + 7
8 Message Message FCN + 8
9 Mute MIC FCN + 9
Line key display Emulates
programmable line
keys
Key sequence
1 Prime line Extension
number/Name LINE + 1
2 Program as
required Feature name (CB, S&R etc) LINE + 2
3 Program as
required Feature name (CB, S&R etc) LINE + 3
LINE + 44 Program as
required Feature name (CB, S&R etc)