No Butts Bin SR1556-F User manual

Assembly Instructions
Shelter type: SR1556-F
SR1556-F-02-100119-USA

EXPLODED VIEW
13
12
11
9
10
5
7
6
14
8
3
1
2
4
2
ITEM
NO. PART NAME
DRG NUMBER LENGTH
Default/QT
Y.
1 S1C Frame S1C
No Plastics
9
2 CB1 Bracket CB1
Default
8
3 JF1 Bracket JF1
Default
12
4 ST3 Roof Tie ST3
Default
1
5 P1 Post P1
Default
1
6 FT1 Bracket FT1
Default
3
7 FT3 Bracket FT3
Default
8
8 RB1 Bracket RB1
Default
16
9 R2 Rafter R2
Default
5
10 Sealing Strip - 2195mm Sealing Strip
Default
8
11 PCE2 - Roof Sheet PCE2
Default
2
12 PCC2 - Roof Sheet PCE1
Default
2
13 RC2 - Roof Strip RC1
Default
5
14 2MD Roof Edging 2MD
2110 4
15 40x40 End cap BOUGHT IN ITEM
40 x 40 x 20
13

3
PARTS LIST
ITEM NO.
PART NO.
DESCRIPTION
DIMENSION
(MM)
DIMENSION
(INCHES)
IMAGE QTY.
1
S1C
Frame 2000 x 1035 78.74 x 40.55 9
2
CB1
Bracket 110 x 110 4.33 x 4.33 8
3
JF1
Bracket 220 x 40 8.66 x 1.58 12
4
ST3
Roof Tie
2060 x 40 x
40
81.10 x 1.57 x
1.57 1
5
P1
Post 2000 x 1030 78.74 x 40.55 1
6
FT1
Foot Bracket
109 x 100 x
40
4.29 x 3.93 x
1.57 3
7
FT3
Foot Bracket
109 x 100 x
80
4.29 x 3.93 x
3.27 8
8
RB1
Bracket 110 x 46 4.33 x 1.81 16
9
R2
Rafter
2200 x 40 x
40
87.40 x 1.57 x
1.57 5
10
SS
Sealing Strip Trim To 2195 Trim To 86.61 4 ROLLS
11
PCE2
Roof Panel 2200 x 1050 87.40 x 41.34 2
12
PCC2
Roof Panel 2200 x 1030 87.40 x 40.55 2
13
RC2
Roof Strip 2200 87.40 5
14
2MD
Roof Edge
Trim
Trim To Fit Trim To Fit 5
15
EC40
Plastic End
Cap
40 x 40 1.57 x 1.57 24

4
Fittings/Tools
Tools required:
Drill/Screwdriver
Mallet
Hack saw
Spanner
Torx bit
Bolt set M10
Nut Washer
Black
Cap
T25 T38 AB1210
M10 x 60 mm
25 mm
Tech
screw
38 mm
Tech
screw
M10/12 x 100mm
Concrete Bolt
Pack A+B
40 40 80 80 136 66 13
Required 21 21 42 42 112 50 11
Spare
19 19 38 38 24 16 2
Image

4180
2110
83.07
164.57
JF1
CB1
S1
CB1CB1CB1
Ensure correct alignment on
corners.
Step 1
Assemble S1C frames to make up the main structure using CB1 brackets
for the corners and JF1 brackets for the straight joints.
5
MEASUREMENTS IN BLUE - MM
MEASUREMENTS IN GREEN - INCHES

FT3
FT1
ST3
CB1
JF1
P1
P1
A
CB1
ST3
DETAIL A
SCALE 1 : 5
JF1 INSIDE
CB1 UNDERNEATH
Step 2
Attach P1 post using one JF1 bracket, then attach ST3 tie bar using
another JF1 bracket and two CB1 brackets.
Move the shelter to its final position, make sure the structure is square
and attach the FT1 and FT3 foot brackets to secure the shelter to the
ground.
NOTE: Insert EC40 into ST3
and P1 before installing.

R2
RB2
R2
RB2
40.75 40.75 40.75 40.75
1035 1035 1035 1035
FRONT VIEW
Step 3
Use RB1 brackets to secure the R2 roof rafters.
7

GENERAL NOTE:
THE 38mm TECH SCREWS ARE
FOR FIXING ROOF STRIPS
(RC) ONLY
PCC2
RC2
PCE2
PCE2
PCC2
PCC2
SS
RC2
SS
PCE2
PCC2
PCE2
Step 4
Apply sealing strips (SS) to the top of the rafters. Align PCE2 roof panels
with the outer rafters then space out the PCC2 panels evenly.
Cover the two edges along the outer rafters and gaps with RC2 strips
before screwing them into place using the 38mm TEC screws .
8

2MD
2MD
Step 5
Clip on the 2MD end caps. Then fit the Black plastic caps on exposed nuts
and bolts. Fit the square end caps to any open ends of box sections.
9

4078.50 FEET HOLE CENTERS
4180
1035 1035 1035 985.50
985.50 995 2048.50
1035 985.50
1035 1035
2180.33
40.75 40.75
80.65
39.17
38.80
40.75 38.80
40.75 40.75 40.75 38.80
161.04
85.84
164.57
10
Plan view
Suggested size for concrete base: 200mm/7.87in oversized on all four sides.

11
NOTES:

12
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.nobutts.com
Tel : [phone]
No Butts Bin Company, Inc. 16 birch Lane, Madison, CT 06443
All Parts and Fixings checked by:
Print Name: Signature: