No Butts Bin SR8059-F User manual

Assembly Instructions
Shelter type: SR8059-F
SR8059F-01-02112021-USA
Email : [email protected]
Web : www.nobutts.com
Tel : [phone]

1
1
5
7
7
11
10
10
6
3
3
2
55
4
14
13
14
13
14
8
12
9
2
EXPLODED VIEW
Tools required:
Drill/Screwdriver
Mallet
17mm Wrench
T25 Torx bit

3
PARTS LIST
ITEM NO. PART NAME
DRG
NUMBER
Size (inch)
IMAGE
QTY.
1 S1C Frame S1C
78.74 x 40.74
5
2 JF1 Bracket JF1
4.33 x 1.57
3
3 CB1 Bracket CB1
4.3 x 4.3 x 1.57
7
4 ST1 Tie Bar ST1
40.4 1
5 DR Bracket DR
4.3 x 1.6 x 2
8
6
AR1R 1m Pitch
Rafter
AR1R
45 x 11.8 OA
3
7
AR1IS 1m Pitch
Infill Panel Shallow
AR1IS
45.2 x 13.5
2
8
AR1CLT2 1m
Apex Roof centre
lower trim 2m
AR1CLT2-02
82.9 x 3.1
1
9
ARFS2 Apex Roof
F section 2m
ARFS2
83.1 x 2 x 2
2
10
AR1POA Roof
Panel outer alu
AR1POA
41.5 x 24.4
4
11
AR1CUT2 1m
Apex Roof centre
upper trim 2m
AR1CUT2
83.1 x 3.9
1
12
AR1TS 1m Apex
Roof Trim strips
AR1TS
24.8 x 2.3
2
13 FT1 Bracket FT1
1.57 x 1.57 x 3.94
2
14 FT3 Bracket FT3
1.57 x 3.15 x 4.17
4
15
40x40 Plastic End
Cap
EC40
1.6 x 1.6
2

4
FIXINGS

42.3
83
42.3
MEASURE THE WIDTH AND DEPTH
OF THE SHELTER TO CHECK
CORRECT ALIGNMENT.
Please note 1.5" Tech Screws
are for roof panels only
ST1
CB1
ENSURE CORRECT
ALIGNMENT ON
CORNERS
CB1CB1
CB1
JF1
JF1
ST1
Step 1
Assemble S1C frames to make up the main structure using CB1 brackets
for the Corners and JF1 brackets for the straight joints.
Use JF1 and CB1 brackets to attach the ST1 tie bar.
5

AR1IS
AR1IS
AR1R
AR1R
AR1R
DR
DR
DR
DR
DR
DR
6
Step 2
Attach AR1R rafters using DR brackets. Secure the AR1IS END PANELS
to S1C frames using tec screws. The end rafters need to be placed in position
at the same time as the END PANELS .

A
ARFS2
ARFS2
AR1CLT2
ARFS2
AR1CLT2
ARFS2
DETAIL A
SCALE 1 : 2
7
Step 3
Attach the AR1CLT2 to the top of the rafters. The ARFS2 parts are to be
attached to the lower part of the rafters as shown below.

AR1TS
AR1POA
AR1CUT2
AR1CUT2
AR1POA
AR1TS
AR1TS
8
Step 4
Attach the AR1POA roof panels to the the rafters.
Cap off the top using AR1CUT2 trim as shown.
Use the AR1TS strips to cover the gaps between the panels.
Once the shelter is in the final position and square, it can be secured to
the ground using the FT3 and FT1 brackets and concrete bolts.

42.32
83.07
45.31
45.31
39.17 42.64
39.17
44.76 41.06
PLAN VIEW
OVERALL DIMENSIONS AND GROUND FIXING POSITIONS
Suggested size for concrete base: 8inch oversized on all 4 sides.
9

10
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
No Butts Bin Company, Inc.
16 Birch Lane, Madison, CT 06443
Email : [email protected]
Web : www.nobutts.com
Tel : [phone]
All Parts and Fixings checked by:
Print Name: Signature: