Nuna Mixxnext User manual

Designed
around your life
7
1
2
9
2
1
8
click
10
click
11
1
2
1
12
1
2
17
11
2 2
18
15
16
1
13 22
20
21
23
24
1
2
19
1
click
3
4
click
click
5
click
6
14
2

IMPORTANT!
READ CAREFULLY
AND KEEP FOR FUTURE
REFERENCE
1
2
37
38
3431
33
32
1
1
2
1
2
36
35
click
click
39
40
11
22
43
11
22
4441
42
30
29
11
2
28
27
26
25
1
1
2
Contents
Product Information 3
Product Registration
Warranty
Child Usage Requirements 4
Warnings 5
Parts List 9
Product Set Up 11
Product Use 13
Accessories 17
Car Seat Adaptor
Rain Cover
Cleaning and Maintenance 19
繁中 21
45
EN
2MIXX next instructions

Child Usage Requirements
This Stroller is suitable for use with children who meet the
following requirements:
Birth to 22 kg or 4 years whichever comes first.
When using the stroller frame with carry cot or Nuna infant
carriers, refer to the child usage requirements listed in those
instruction manuals.
Product Information
Model Number:_________________________________________________________________
Manufactured Date: __________________________________________________________
Product Registration
Please fill in the above information. The model number and
the manufactured date are located on a label on the bottom
of the stroller frame.
To register your product please visit:
www.nunababy.com/tw/gear-registration
Warranty
We have purposely designed our high-quality products so
that they can grow with both your child and your family.
Because we stand by our product, our gear is covered by a
custom warranty per product, starting from the day it was
purchased. Please have the proof of purchase, model number
and manufactured date available when you contact us.
For warranty information please visit:
www.nunababy.com/tw/warranty
EN EN
3MIXX next instructions 4MIXX next instructions

WARNING
Failure to follow these warnings and instructions
could result in serious injury or death.
Always use the restraint system.
Check that the pram body or seat unit or car seat
attachment devices are correctly engaged before
use.
Do not let the child play with this product.
Ensure that all the locking devices are engaged
before use.
Never leave the child unattended.
This product is not suitable for running or skating.
To avoid injury ensure that the child is kept away
when unfolding and folding this product.
Accessories which are not approved by the
manufacturer shall not be used. Only replacement
parts supplied or recommended by the
manufacturer/distributor shall be used.
Adult assembly required.
ALWAYS set the parking brake when you stop.
Any damage caused by the use of accessories not
supplied by Nuna will not be covered in terms of
warranty.
Any load attached to the handle and/or on the
back of the backrest and/or on the sides of the
vehicle will affect the stability of the vehicle.
Be certain the stroller is fully erected and latched
before allowing your child near the stroller.
DO NOT carry additional children, goods,
accessories in or on the stroller except as
permitted in this manual. They may cause the
stroller to become unstable.
DO NOT leave the stroller exposed in the vicinity of
a strong source of heat i.e. a radiator or open fire.
DO NOT place any item on the canopy.
DO NOT store the stroller in a damp place. Always
allow the fabric to dry naturally away from direct
heat.
DO NOT use storage basket as a child carrier.
DO NOT use the stroller if any parts are damaged
or missing.
For car seats used in conjunction with a chassis,
this vehicle does not replace a cot or a bed. Should
your child need to sleep, then it should be placed
in a suitable pram body, cot or bed.
Keep small parts away from children as they pose
a choking hazard.
EN EN
5MIXX next instructions 6MIXX next instructions

Negotiate curbs and rough ground carefully.
Repeated impact could cause damage to the
stroller.
NEVER allow children to stand on the stroller.
NEVER carry more than one child at a time in the
stroller.
NEVER use the stroller on stairs or escalators. You
may suddenly lose control of the stroller or your
child may fall out.
The harness must always be correctly fitted and
adjusted. The harness is not a substitute for proper
adult supervision.
The parking brake shall be engaged when placing
and removing children.
Overloading, incorrect folding, and the use of
accessories e.g. child seats, bag hooks, rain
covers, buggy boards, etc… other than those
approved by Nuna may damage or make the
stroller unsafe.
Rubber tires may leave black scuff marks on
smooth surfaces such as parquet, laminate and
linoleum.
STRANGULATION HAZARD Do not place items
with a string around your child’s neck, suspend
strings from this product, or attach strings to toys.
To avoid any danger of suffocation, remove all
plastic covers before using this item and destroy or
keep away from babies and children!
To prevent a hazardous, unstable condition, do not
place more than 4.5 kg in the storage basket and
more than 0.45 kg in the storage pocket.
USE the most reclined position for new born
babies.
Use the pushchair with a child weighing no more
than 22 kg. It will cause damage to the pushchair
with an unfitted child.
EN EN
7MIXX next instructions 8MIXX next instructions

EN EN
9MIXX next instructions 10MIXX next instructions
Parts List
Make sure all parts are available before assembly.
If any part is missing, please contact local retailer. No tools
are required for assembly.
CHOKING HAZARD: Remove and immediately discard
protective end caps from each wheel and wheel hub axle.
1 Front Wheel (x2)
2 Rear Wheel (x2)
3 Car Seat Adaptor
4 Rain Cover
5 Canopy
6 Canopy Visor
7 Seat Pad
8 Armbar
9 Calf Support
10 Handle Adjustment
Button
11 Shoulder Harness Pads
12 Canopy Clips
13 Stroller Frame
14 Buckle and Crotch Cover
15 Seat Release Button
16 Top Canopy Window
17 Back Canopy Window
18 Stroller Handle
19 Recline Adjustment
Button
20Folding Button
21 Seat Ventilation
22 Storage Pocket
23 Storage Basket
24Brake Lever
25 Insert
x2
1
x2
23
4
6
8
25
5
6
7
10
8
9
1
13
2
12
11
14
16
17
20
21
22
19
23
18
24
15

EN EN
Product Set Up
Open Stroller
1 - Open the storage latch as shown (1). Rotate the handle to
the rear of the stroller. A “click” sound means the stroller
frame is open completely. (2)
2 - Squeeze the recline adjustment button on the back of
the seat and rotate the backrest to the upright position.
(3)
Check that the stroller is open completely before
continuing.
Canopy
1 - Zip the canopy visor to the inside of the canopy. (4)
2 - Insert the canopy clips into the canopy mounts on the
sides of the stroller. A “click” sound means the canopy is
assembled completely. (5)
Front Wheels
1 - Insert the front wheel into the front leg. A “click” sound
means the wheel is assembled completely. (6) Repeat on
opposite side.
Check the wheel is securely attached by pulling out.
2 - To remove the front wheel, press the release button (7)-1
and detach the front wheel from the front leg. (7)-2
Rear Wheels
1 - Insert the rear wheel into the rear leg. A “click” sound
means the rear wheel is assembled completely. Repeat
on opposite side. (8)
Check that the wheels are securely attached by pulling
them out.
2 - To remove the rear wheel, press the release button (9)-1
and detach the rear wheel from the rear leg. (9)-2
Armbar
Always secure the child with the harness. The armbar is
not a restraint device.
1 - Align the armbar ends with the armbar mounts, and
insert until it clicks into place. A “click” sound means
the armbar is assembled completely. (10)
2 - To remove the armbar, press the armbar release buttons
(11)-1 and lift the armbar up. (11)-2
3 - For a more compact fold when the seat is rear facing,
press the armbar adjustment buttons (12)-1 and rotate
the armbar down (12)-2 until it clicks into place.
NEVER use the armbar in lowered/folded position when
child is in stroller.
The completely assembled stroller is shown as (13).
Check Set Up
Stroller frame is latched open
Front wheels, rear wheels securely attached
Canopy mount attached to stroller frame and
canopy attached to seat pad
Armbar is securely attached
11 MIXX next instructions 12MIXX next instructions

EN EN
Product Use
The parking brake MUST be engaged when the stroller is
stopped and when placing and removing child.
Securing Your Child
To avoid serious injury from falling or sliding out, always
use the seat belt.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and
the shoulder harness should be about the thickness of
one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child’s neck.
1 - Press the button, the buckle will release automatically.
(14)
2 - Match the waist belt buckle with the shoulder buckle
(15), and align them with the center buckle, the buckle
can lock automatically. (16)
3 - Fit the harness snugly to your child by sliding the
adjustment straps to tighten (17)-1. Then pull the waist
adjustment straps out (17)-2.
Shoulder Harness Position
1 - The upper shoulder harness buckles can be moved up
and down for added adjustment. (18)
Crotch Belt
Identify crotch belt slot that will achieve a snug fit. Change
crotch belt slot if necessary.
1 - Smaller babies use this position. (19)-1
2 - Larger babies use this position. (19)-2
Canopy
1 - To open the canopy, pull the canopy toward the front of
the seat. To close the canopy, push it back. (20)
2 - Position the canopy visor forward or backward as
needed. When not in use, fold the canopy visor under the
canopy. (21)
3 - Open the zipper on the canopy for extra shade and
ventilation. (22)
4 - For ventilation, flip up the top canopy window cover. (23)
5 - For additional ventilation, flip up the back canopy
window cover. (24)
The canopy is NOT removable.
Front Swivel Locks
It is recommended to use the front swivel locks on uneven
surfaces.
1 - Squeeze (25)-1 and pull out the front swivel lock (25)-2
to lock the front wheel forward facing. You may need to
move the wheel to get it to lock.
2 - Push in the front swivel lock to unlock. (26)
13 MIXX next instructions 14MIXX next instructions

EN EN
Brake
1 - To lock the rear wheels, step down on the red area on
the brake lever. (27)
2 - To unlock the rear wheels, step down on the green area
on the brake lever. (28)
Always apply the brake when the stroller is stopped.
Push the stroller slightly to ensure the brake is engaged.
Handle
The handle has 3 positions.
1 - To adjust the height of the handle, press the handle
adjustment buttons (29)-1 and pull the handle up or
down. (29)-2
Recline Adjustment
There are 5 recline positions for the backrest.
1 - To raise or lower the backrest, squeeze the recline
adjustment button, and pull the seat up or down. (30)
Calf Support
The calf support has 2 use positions.
1 - To raise the calf support, lift up. (31)
2 - To lower the calf support, press the adjustment buttons
on the sides (32)-1, and push down. (32)-2
Insert
The insert can be removed to provide a mesh seating area for
better ventilation during hot weather.
1 - To remove the insert, release the velcro on insert from
the back of the seat, unbuckle the harness, thread the
harness through the harness slots and remove the seat
pad. (33)
DO NOT remove the backrest tube.
Reverse Seat
The seat can be used rear or forward facing.
1 - Squeeze the seat release buttons and lift the seat up.
(34)
2 - Turn the seat in the opposite direction and place on the
seat mounts until it clicks into place. A “click” sound
means the seat is attached. (35)
Check to make sure seat is securely attached by pulling
up on it.
Fold
Before folding, push the canopy to the rear of the stroller.
1 - Squeeze the recline adjustment button on the back of
the seat (36)-1 and rotate the backrest to the stored
position. (36)-2
2 - Pull up on the folding buttons (37)-1 and push the stroller
forward to fold. (37)-2
3 - Lock the stroller by tucking the storage latch onto the
storage mount. (38)
15 MIXX next instructions 16MIXX next instructions

EN EN
Accessoires
Car Seat Adaptors
When using the stroller with Nuna infant carriers, please
refer to the following instructions.
1 - To attach the adaptors, place the adaptors onto the seat
mounts as shown. A “click” sound means the adaptors
are locked. (39)
2 - To attach the infant carrier, place the infant carrier onto
the adaptors as shown (40), A “click” sound means the
delete extra space infant carrier is locked. (41)
3 - The infant carrier angle can be adjusted with our
adjustable adaptors. (42)
4 - To remove the infant child carrier, lift the infant carrier
up (43)-2 while pressing the stroller release buttons.
(43)-1
5 - To remove the adaptors, lift the adaptors up (44)-2 while
delete extra space pulling the release buttons. (44)-1
Rain Cover
Check that the canopy is completely open before attaching
the rain cover.
1 - To assemble the rain cover, place it over the stroller.
(45)
ALWAYS check ventilation when the rain cover is on the
product.
ALWAYS check that the rain cover has been cleaned and
dried before folding.
DO NOT fold the stroller when the rain cover is attached.
DO NOT place your child in the stroller in hot weather
with the rain cover attached.
17 MIXX next instructions 18MIXX next instructions

EN EN
NUNA International B.V. NUNA and all associated logos are trademarks.
19 MIXX next instructions 20MIXX next instructions
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp
cloth, but do not use abrasives or bleach. Do not use silicon
lubricants as they will attract dirt and grime. Do not store
your stroller in a damp place.
Clean the stroller wheels regularly with water and remove
any dirt.
To ensure long-lasting use, wipe off this product with a soft,
absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for washing and
drying instructions.
It is normal for fabric to color from sunlight and to show
wear and tear after a long period of use, even when used
normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts
are torn, broken, or missing, stop using this product.

請妥善保存本說明書
以備不時之需!
使用產品前請仔細閱讀本說明書，
並妥善保存說明書以便日後參考。
繁中 繁中
22MIXX next 手推車說明書
目錄
產品資訊23
保固條件
適用範圍 24
警告 25
產品組件及各部位名稱 29
安裝手推車 31
產品使用 33
使用配件 37
汽車椅卡座
雨篷
維護與保養 38
21 MIXX next 手推車說明書

繁中 繁中
24MIXX next 手推車說明書
產品資訊
產品名稱：__________________________________________
生產日期：__________________________________________
保固與售後服務
產品於保固期間內發生問題，請與零售商聯絡；若零售商無
法提供服務，他們會聯絡當地的Nuna經銷商。產品在正常使
用和老化中產生的自然磨損與劣化，並不在保固範圍內。當
車輪磨損過度時，請向本公司或代理商聯繫更換(需支付費
用)。請留意產品下方的產品型號與生產日期序號。當有保固
需求時，請提供以上產品資訊。
請至www.nunababy.com/tw/gear-registration
網站登記您購買的產品。
保固條件
保固始於產品購買日，我們提供維修服務，但不提供產品退
換。保固期限不會因零件更換或維修而延長。Nuna有權利針
對產品進行改善設計，此前製造的產品則無更換義務。
相關保固資訊，詳見官網:www.nunababy.com/tw/warranty
產品名稱 MIXX next 手推車
主要材質 塑膠、鋁合金／五金、布
產地 中國
適用範圍
寶寶需要滿足下列要求：
最大體重：15公斤
嬰幼兒年齡：0-36個月
23 MIXX next 手推車說明書

不可將手推嬰幼兒車放置於馬路、坡道或危險
場所。
嬰幼兒乘坐於手推嬰兒車內時，不可將整個車台
往上提。
保持嬰幼兒遠離此篷罩以免造成窒息。
六個月大以下的嬰幼兒應同時使用腰部及胯部的
安全帶。
停泊此手推嬰兒車時務必確實使用所有之制動
裝置。
使用前應確實豎立及固定各機構以確保安全。
遠離火源。
本產品適用於剛出生及體重不超過15公斤的嬰幼
兒使用。
一次僅能乘坐一位嬰幼兒。
任何附載於車手上的重量將影響產品的穩定性，
可能導致手推車翻覆的危險。
本產品不適用於跑步和滑冰。
使用手推車之前，請務必去掉、銷毀或是將所有
附加包裝遠離嬰幼兒，以防嬰幼兒窒息。
繁中 繁中
26MIXX next 手推車說明書
警告
Nuna MIXX next 手推車擁有專利並符合台灣標準
CNS 12940-2013和歐洲安全標準EN 1888-2:2018
相關規範。重要︰請務必依照產品說明書和警告以
避免導致嚴重傷害甚至是死亡事件發生。
嬰幼兒的安全是您的責任。
不得將嬰幼兒單獨留置車上無人看護。
不得附載其它的嬰幼兒、物品或附件於推車上。
超載或不正確的折疊及使用非經核准的零附件都
可能造成車台損壞、故障或不安全，請務必閱讀
製造商之說明書。
寶寶乘坐時，安全帶或束縛系統必須正確的扣合
及使用。
當調整手推嬰幼兒車上之任何可活動配件時必須
確定嬰幼兒的肢體與車台保持安全距離。
嬰幼兒可能會滑入足底部分的缺口或造成窒息。
禁止於樓梯間使用手推嬰幼兒車。
使用時應遠離高溫、水池或電源之臨近範圍。
不可讓嬰幼兒站立。
6個月以下嬰幼兒使用時，必須使用最斜躺
位置。
25 MIXX next 手推車說明書

請勿擺放超過4.5公斤的物件於置物籃內，以免
導致手推車不穩定而產生危險。請勿將嬰幼兒放
到置物籃內。
請勿擺放超過0.45公斤的物件于置物口袋內，
以免導致手推嬰儿車不穩定而產生危險。
請勿允許您的嬰幼兒將手推車當玩具玩耍。
遇緊急事故時，迅速將乘坐的兒童移離現場。
將寶寶放入手推車或自手推車上抱起時，都應使
用剎車裝置。
使用前請檢查睡箱或座椅或汽車椅連接裝置是否
正确鎖定。
當結合汽車椅使用時，本產品不可代替睡床使
用。若您的寶寶需要睡眠時，請讓寶寶睡在合適
的睡床或適合寶寶睡眠的地方。
使用時必須配用束縛系統。
調整手推車時，如打開或收合手推車，嬰幼兒須
遠離手推車的活動部件。
禁止在上下樓梯／手扶梯時使用手推車。
請勿在遮陽篷上放置任何物品。
請使用Nuna原廠零配件。
Nuna不保固使用其它廠商提供的零配件所造成
的損害。
如果有任何零件損壞、磨破或丟失，請停止使用
該產品。
請注意在粗糙地面使用時，反覆衝擊會損壞手
推車。
輪胎可能會在某些表面留下黑色痕跡，特別是光
滑的表面，像木地板、合層板和亞麻油地板。
請勿將產品放置潮濕的環境中，請保持產品的
乾燥。
為避免窒息危險，請將小零件存放到嬰幼兒接觸
不到的地方。
任意放置未經製造商核可之物品於車臺上將造成
危險。
繁中 繁中
28MIXX next 手推車說明書27 MIXX next 手推車說明書

產品組件及各部件名稱
組裝前請確認所有部件已經齊全，如有遺漏，請與銷
售商聯繫。本產品無需工具進行組裝。
 窒息危險：務必去掉、丟棄每個車輪或輪軸的保 
 護套
。
1 前輪(x2)
2 後輪(x2)
3 汽車椅卡座
4 雨篷
5 遮陽篷
6 遮陽片
7 座墊
8 扶手
9 小腿靠
10車手調整按鈕
11 肩帶護片
12頂篷支架
13手推車
14安全扣及胯帶護片
15座椅卡合按鈕
16頂篷前視天窗
17 頂篷透氣天窗
18車手
19背靠調整按鈕
20收合按鈕
21透氣座椅背靠
22置物口袋
23置物籃
24剎車踏板
25小座墊
繁中 繁中
30MIXX next 手推車說明書29 MIXX next 手推車說明書
x2
1
x2
23
4
7
8
25
5
6
7
10
8
9
1
13
2
12
11
14
16
17
20
21
22
19
23
18
24
15

安裝後輪
1- 將後輪套入後輪剎車組，聽到“咔噠”聲表示後輪已安
裝到位(8)。
往外輕拉，確定後輪已完整安裝。
2- 按壓後輪釋鎖按鈕(9)-1，同時向外拉(9)-2，即可拔出
後輪。
安裝扶手
寶寶乘坐時必須繫上安全帶，扶手並不能確保寶寶的
安全。
1- 將扶手卡槽對準扶手座插入，聽到“咔噠”聲表示扶手
已安裝完成(10)。
2- 按壓扶手兩側釋鎖按鈕(11)-1，兩側同時向外拉即可拆卸
扶手(11)-2。
3- 可將座椅調成後向，按壓兩側扶手調整按鈕(12)-1並將扶
手旋轉向下，收合體積更小(12)-2。
 扶手調整僅用於收合時，寶寶乘坐時切勿旋轉扶手。
手推車組裝完成後如圖13所示。
安裝手推車
打開手推車
1 - 打開收合鉤(1)。
2- 向上拉起車手(2)，聽到“咔噠”聲表示手推車完全
打開。
3- 旋轉背靠到垂直位置(3)。
使用手推車前務必確保車架已打開到位。
安裝遮陽篷
1- 將遮陽片上的拉鏈與遮陽篷上的拉鏈對齊，拉上拉鏈即
 可安裝遮陽片(4)。
2- 將遮陽篷固定片插入固定座內，聽到“咔噠”聲即完成
 安裝(5)。
安裝前輪
1- 將前輪套入前腳，聽到“咔噠”聲表示前輪已安裝完成
(6)。
往外輕拉，確定前輪已完整安裝。
2- 按壓前輪釋鎖按鈕(7)-1，同時向下拉(7)-2，即可拔出
前輪。
繁中 繁中
32MIXX next 手推車說明書31 MIXX next 手推車說明書

調整肩帶位置
1- 肩帶固定栓可上下滑動調整至適當位置(18)。
調整胯帶位置
依寶寶的身形大小，胯帶位置可2段調節。
1- 適合更小的寶寶使用(19)-1。
2- 適合更大的寶寶使用(19)-2。
使用遮陽篷
1- 打開遮陽篷，請將遮陽篷推向前方。
 折叠遮陽篷，請將遮陽篷拉向後方(20)。
2- 遮陽片可向前打開或向內收起，不使用時可收合於遮陽篷
內(21)。
3- 遮陽篷中段拉鏈可打開以延伸遮陽篷範圍(22)。
4- 遮陽篷天窗可打開增加透氣性(23)。
5- 遮陽篷後方可翻起，提供更大面積的透氣網(24)-1。
遮陽篷不可移除。
前輪定向
在碎石路面或不平路面推行時，建議鎖定前輪，便能更輕
鬆地操控手推車。
1- 鎖定時，按壓前輪上的定向拉板兩側並向外拉出，旋轉到
後方，即可固定手推車前行方向(25)。
2- 釋鎖時，推進定向拉板即可(26)。
產品使用
當手推車停止、或將寶寶置入手推車、抱出手推車時，請
務必使用剎車以確保安全。
使用安全扣
為了防止寶寶摔跤，寶寶乘坐時必須繫上安全帶。
請牢牢地繫上安全帶，並注意寶寶與安全帶之間須可以放進一
個手掌的厚度。
請勿交叉肩帶，以免對寶寶頸部造成壓迫。
1- 按下母扣上的按鈕，安全扣會自動鬆開(14)。
2- 將肩帶扣插入腰帶扣(15)，再將他們插入母扣內會自動扣
合(16)，聽到"咔噠"聲表示扣合到位。
3- 滑動織帶以調整肩帶長度(17)-1，拉緊腰部織帶(17)-2，使
 寶寶更加舒適。
檢查
  收合鉤鬆開後車架已完全展開。
  前輪、後輪已確實安裝。
  遮陽篷已確實安裝，支架及拉链皆安裝確實。
  置物籃已確實安裝。
  扶手已確實安裝。
繁中 繁中
34MIXX next 手推車說明書33 MIXX next 手推車說明書

小座墊
當天氣炎熱時，可拆卸座墊直接使用透氣通風的網孔座椅。
1- 欲拆卸座墊，請將座墊上方與推車連接的黏扣帶解開，按
壓安全扣中間按鈕，打開安全扣，將扣具穿過座墊即可取
掉座墊(33)。
請勿拆卸背靠管。
座椅換向
座椅可以換向，可以讓媽媽和寶寶面對面。
1- 按壓座椅兩側釋鎖按鈕同時提起座椅(34)。
2- 改變座椅方向，然後插入座椅底座，聽到“咔噠”聲表示
已安裝完成(35)。
安裝後，將座椅向上拉提確認是否已完整安裝。
收合手推車
收合手推車前，請先收攏遮陽篷。
1- 按壓背靠調整按鈕(36)-1，調整至收合位置(36)-2。
2- 抬起車手兩側的收合按鈕(37)-1，然後將車手向前壓即可收
合手推車(37)-2。
3- 收合鉤會自動扣合，手推車收合完成後如圖38所示。
使用剎車
1- 準備剎車時，踩下剎車踏板後方紅色部份即可完成剎車動
作(27)。
2- 打開剎車時，踩下剎車踏板前方綠色部份即可完成釋鎖動
作(28)。
手推車停止時，請剎車。
調整車手
車手有3種段位可供使用。
1- 按壓車手兩側的調整按鈕(29)-1，同時向上或向下拉車手至
適合段位(29)-2。
調整背靠
背靠可5段角度調節。
1- 調低背靠角度，請按壓背靠調整按鈕，向上或向下調整至
所需的背靠角度(30)。
調整小腿靠
小腿靠共有2個段位可供調節。
1- 段位調高時，將小腿靠支撐板由下往上推即可(31)。
2- 段位調低時，按壓小腿靠兩側的調整按鈕(32)-1，同時向下
調節小腿靠支撐板(32)-2。
繁中 繁中
36MIXX next 手推車說明書35 MIXX next 手推車說明書

使用配件
汽車椅卡座
當與Nuna嬰兒提籃配合使用時，請依以下步驟︰
1- 安裝汽車椅卡座，放置汽車椅卡座卡合到座椅底座上，
聽到“咔噠”聲表示汽車椅卡座卡合到位(39)。
2- 安裝汽車椅，放置汽車椅到汽車椅卡座上(40)，聽到“咔
噠”聲表示汽車椅卡合到位(41)。
3- 汽車椅角度可隨卡座調整(42)。
4- 移除汽車椅，按壓汽車椅兩側的釋鎖按鈕(43)-1，同時向
上提起汽車椅即可(43)-2。
5- 移除汽車椅卡座，向外拉起汽車椅卡座上的釋鎖按鈕
(44)-1同時向上提起汽車椅卡座即可(44)-2。
雨篷
安裝雨篷前，請確認雨篷已完全展開。
1- 將雨篷套到座椅上(45)。
使用雨篷時，請隨時注意並確認雨篷內有良好的通風。
不使用雨篷時，請先確認雨篷已清潔並乾燥，再收納。
請勿收合已罩上雨篷的手推車。天氣炎熱時，請勿將寶
寶放在裝有雨篷的手推車內。
維修與保養
可用濕布清潔車架和座布，請勿使用研磨劑或漂白劑。請勿
使用潤滑劑，因為它們會吸附灰塵和污垢。請勿將手推車儲
存在潮濕的地方。
請定期以水清洗輪子，並清除污垢。
為使手推車能長期使用，下雨天使用後，請用軟質可吸水的
布擦拭手推車。
請參考手推車上洗滌標版內容的洗滌方式。
長期使用之後，在正常狀況下，座布可能產生褪色、磨損或
撕裂。
為確保安全，請使用Nuna原廠零配件。
請定期檢查您的手推車功能是否正常與零件是否鬆弛磨損或
脫落。一旦發生以上任何狀況，請立即停止使用本手推車。
NUNA International B.V. NUNA及所有相關徽標皆為商標
繁中 繁中
38MIXX next 手推車說明書37 MIXX next 手推車說明書