OCEE DESIGN Den Seat SASS-0079 A User manual

Assembly Instructions
Den Seat (ZigZag Module)
SASS-0079 A

Seat | Back est
45
C x1
M6 x 45mm Bolt
Q x4
Seat | Pad
B x1
Seat Components
Seat | Base Box
A x1
30
30mm Washer
x6
Tools
4mm Allen Key/Phillips Screwdriver
DEN Seat Assembly Instructions DWG No: SASS-0079
evision: A (08/12/15)
Drawn by: CE
Drawn date: 09/10/15
Bradawl (or similar, see step 01)
85
M6 x 85mm Bolt
P x2

DEN Seat Assembly Instructions
04.
Continue to fix the sides of the seat base box (A) to the ZigZag shell using 2x M6 x
85mm machine screws (P) and 2x 30mm washers ( ) in the holes marked above.
Passing the bolts (P) through the washers ( ) and holes in the side of the base box (A)
into the inserts in the Den panels.
P
A
01.
All inserts are indicated by the circular white stickers, as shown above. Locate the
inserts through the fabric in the holes indicated above and pierce using a sharp pointed tool
such as a bradawl or the end of a screwdriver, in preparation for passing bolts into
inserts.
Alternatively, carefully make a small cross cut (approx 10mm across) using a sharpe knife
over each of the indicated holes.
02.
Before assembling, make sure that all the levellers are set so that the bottom of the
base box (A) is flush with the bottom of the Den panels (nominally 20mm from the
ground).
20mm
A- Seat | Base Box
Panel
Levellers
A
A
DWG No: SASS-0079
evision: A (08/12/15)
Drawn by: CE
Drawn date: 09/10/15
03.
Fix the sides of the seat base box (A) to the ZigZag shell using 4x M6 x 45mm
machine screws (Q) and 4x 30mm washers ( ) in the holes marked above. Passing
the bolts (Q) through the washers ( ) and holes in the side of the base box (A) into the
inserts in the Den panels.
Q
A

DEN Seat Assembly Instructions
06.
Lower the back rest (C) onto the seat pad (B). (As shown above)
07.
epeat steps 01 - 06 for the remaining seats in the configuration.
C
DWG No: SASS-0079
evision: A (08/12/15)
Drawn by: CE
Drawn date: 09/10/15
05.
Lower the seat pad (B) onto the base box (A) until it locates into place. (As shown
above)
B