Omron F3UV-A30 User manual

1
UV Power Monitor F3UV
Monitor the Output of a UV Light Source
through an Optical Fiber Cable
Monitors with Optical Fibers
Head Unit withstands temperatures of up to
300°C.
Easy-to-read digital display of measurement
values.
Harmful UV light converted to visible light before
performing measurements. This feature prevents
deterioration of the Amplifier’s light receiving
element.
Monitors with Built-in Amplifiers
Deterioration due to UV light prevented by
protective structure.
Confirm the output status of the UV light source
with an operation indicator.
Filtering Cover (reduces light intensity by 1/6.5)
also available.
Ordering Information
Monitors with Built-in Amplifiers
Main Unit
Appearance
Intensity range of incident light Output Model number
1 to 30 mW/cm
2
Analog voltage output (1 to 5 V)
F3UV-A30
0.2 to 3 mW/cm
2F3UV-A03
Note: Does not function as a sensor .
Monitors with Optical Fibers
Amplifier
Appearance Connection
method Outputs T ransistor type Model number
Pre-wired cable • Judgement output
•Answer-back output
•Analog current or voltage
NPN F3UV-XW11
•
A
na
l
og curren
t
or vo
lt
age
output PNP F3UV-XW41
Head Unit
Appearance W
avelength range of
incident light
Max. temperature Model number Remarks
200 to 370 nm 300_C
(Use at temperatures below
the Fiber Unit’ s rated
operating temperature.)
F3UV-HM Includes two M8 nuts
and one mounting plate.

F3UV F3UV
2
Fiber Units
Compatible
Amplifier Units
Compatible
Head Units
Appearance Max.
temperature
Intensity range of
incident light
(see note)
Model number Quantity
F3UV-XW11,
F3UV-XW41 F3UV-HM
M4 threads, 2 m
300_C 10 to 300 mW/cm
2F32-300 1
M4 threads, 2 m
70_C 10 to 300 mW/cm
2F32-70
Note: The values given are for a standard UV light source with a central wavelength of 360 nm, measured with a standard illumination meter
(and for use in combination with the specified Amplifier and Head Unit). The power range is one for which teaching to 100% is possible.
Accessories (Sold Separately)
Accessories for Monitors with Built-in Amplifiers
Appearance Name Model number
Protective T ube (Protects the cord.) F39-CU1M
Protective Cover (Protects the display.) F39-HU2
1/6.5 Filtering Cover F39-HU1
Mounting Bracket F39-L9
Accessories for Monitors with Optical Fibers
Appearance Name Model number Quantity Applicable Fiber Units
Protective Tube
(Protects the fiber .) F39-FU1M 1 F32-70

F3UV F3UV
3
Specifications
Ratings/Characteristics
Monitors with Built-in Amplifiers (Main Unit)
Item F3UV-A30 F3UV-A03
Incident light power range
1
1 to 30 mW/cm
2
0.2 to 3 mW/cm
2
Incident light wavelength range 200 to 370 nm
Power indicator Green LED
Operation indicator Orange LED (lights with an output between 4 and 5 V)
Sensitivity adjustment One-turn variable adjuster
Power supply voltage 12 to 24 VDC ±10%
Current consumption 15 mA max.
Response time
2
300 ms max. 400 ms max.
Output3 1 to 5 V (with an of fset voltage of 0.2 V min.)
Connection impedance 100 k Ω min.
Repetitive accuracy ± 2% F .S. max.
T emperature drift 0.2% of F .S./°C max.
Ambient operating illumination
4
Fluorescent light 1,000 lx max. Fluorescent light 500 lx max.
Ambient temperature Operating: –10 ° to 70 °C Storage: –25 ° to 80 °C
Ambient humidity Operating: 35% to 85%
Insulation resistance 20 M Ω min. (at 500 VDC)
Dielectric strength 1,000 V AC 50/60 Hz for 1 min
V ibration resistance 10 to 150 Hz, 0.1-mm amplitude in X, Y , and Z directions
(8 minutes of vibration × 10 repetitions= total time 80 minutes)
Shock resistance 150 m/s
2
three times each in the ± X, ±Y , and ± Z directions
Degree of protection Conforms to IEC IP30
Connection method Pre-wired cable with a standard length of 2 m
W eight (packed) 78 g
Material Casing: Die-cast zinc Window: Synthetic quartz glass
Accessories Operation Manual
Note: 1. Using a standard UV light source and UV illumination meter in a power range for which analog output can be set to 5 V .
2.
The response time is the rise time of the output signal to 10 to 90%.
3. An output voltage up to 6 V can be output. Adjust the sensitivity so that the output is less than 5 V . The output is 0.2 to 1 V when there
is no incident UV light.
4. This value is the illumination at the receiver window maintaining an of fset voltage of 1 V max. with the fluorescent light.

F3UV F3UV
4
Accessories (Sold Separately)
Protective T ube (Protects the Cord.)
Item F39-CU1M
Head connector Flexible tube End cap
Ambient temperature –40° to 100 ° C for operation and storage
(Use within the specified operating temperature range for the Monitor .)
Ambient humidity Operating: 35% to 85% Storage: 35% to 95%
Bending radius 24 ± 5 mm
Max. pulling force 2 N-m max. between the head connector and tube, end cap and tube, or on the tube itself
Crush weight 9.8 N-m max. load on the side of the tube
Material Head
connector Nickel-plated brass
End cap
Tube Stainless (SUS304)
Attachment M2 screws
Monitors with Optical Fibers
Amplifiers
Item F3UV-XW11 F3UV-XW41
Power supply voltage 12 to 24 VDC ±10%
Current consumption 75 mA max.
Outputs Analog output
Current (4 to 20 mA) or voltage (1 to 5 V) (Monitoring mode or integral mode)
p
Judgement output
NPN open collector output, 100 mA max.,
residual voltage1Vmax
PNP open collector output, 100 mA max.,
residual voltage2Vmax
Answer-back output
residual voltage 1 V max.
(Monitoring mode or integral mode)
residual voltage 2 V max.
(Monitoring mode or integral mode)
Inputs
Remote teaching
input ON:
0 V short-circuit (current 1 mA max.)
OFF: Open (open or 9 to 24 V)
ON: Power supply voltage short-circuit or 9 to
24 V (open-circuit current: 3 mA max.)
Reset input
OFF: Open
(open
or
9
to
24
V)
(p )
OFF: Open (open or 1.5 V max.)
Protective circuits Reversed power supply polarity protection and output short-circuit protection
Response time
1
500 ms max.
Sensitivity setting T eaching function
Indicators Power supply/T eaching indicator (green/red), Operation indicator (orange), 7-segment digital
percentage display (red), 7-segment digital threshold display (red)
Repetitive accuracy ± 2% F .S. max.
Ambient operating illumination
2
Fluorescent light 1,000 lx max.
T emperature drift ± 0.1% of F .S./°C max.
Ambient temperature Operating: –25 to 55 ° C (with no icing or condensation) Storage: –40 to 70 ° C (with no icing or
condensation)
Ambient humidity Operating or storage: 35% to 85%
Insulation resistance 20 M Ω min. (at 500 VDC)
Dielectric strength 1,000 V AC 50/60 Hz between the leads and the case
V ibration resistance 10 to 150 Hz, 0.1-mm amplitude or 15 m/s
2
in X, Y , and Z directions each for 2 hours
Shock resistance 150 m/s
2
three times each in the X, Y , and Z directions
Degree of protection Conforms to IEC 60529 standards IP30
Connection method Pre-wired cable with a standard length of 2 m
W eight (packed) Approx. 270 g
Material ABS plastic
Accessories Operation Manual
Note: 1. The response time is the rise time or fall time of the output signal to 10 to 90%.
2. The ambient operating illumination is the illumination that changes the analog output +5% F .S. at 200 lx; it is not the operational limit.
3. An analog output of up to 6 V (or 24 mA) can be output. The output is 1 V (or 4 mA) when there is no incident UV light.
4. F .S. stands for full scale. For a current output, full scale is 16 mA (4 to 20 mA). For a voltage output, full scale is 4 V (1 to 5 V).

F3UV F3UV
5
5. Definition of the luminous energy integral: The physical unit of the luminous energy integral is energy (J: joules) and this value is
calculated by multiplying the UV intensity (mV) by the time of exposure (s), but it is dimensionless when this sensor ’ s analog output
value (V) is used for the UV intensity . The integral is measured with an 1 1 ms sampling time.
Head Unit
Item F3UV-HM
Incident light wavelength range 200 to 370 nm
T emperature drift –0.15%/°C max.
Ambient temperature Operating or storage: –40 ° to 300 ° C (with no icing or condensation)
Ambient humidity Operating or storage: 35% to 85% (with no icing or condensation)
W eight (packed) Approx. 300 g
V ibration resistance 10 to 55 Hz, 0.75-mm amplitude or 10 m/s
2
Shock resistance 500 m/s
2
Material
Protective casing Stainless steel (SUS303)
Fluorescent fiber
path
Functional fluoroglass
Accessories M8 nut and mounting bracket
Fiber Units
Item Model
F32-300 F32-70
Ambient temperature
(with no icing or condensation)
Operating: –40° to 300 °C*1
Storage: –40° to 1 10°COperating: –40°
to 70 °C
Storage: –40°
to 70 °C
Ambient humidity
(with no icing or condensation)
Operating: 35 to 85%
Storage: 35 to 95%
Bending radius 25 mm min. 25 mm min.
Fiber outer sheathing material SUS Black polyethylene
Degree of protection Conforms to IEC IP67
Standard fiber length 2 m
Note: The maximum temperature is lower near the amplifier unit. See the Dimensions for details.
Accessories (Sold Separately)
Protective T ube (Protects the Fiber .)
Item F39-FU1M
1,000
Head connector Flexible tube End cap
Ambient temperature –40° to 150 ° C for operation and storage
(Keep the ambient temperature within the range specified for the fiber within the tube.)
Ambient humidity Operating: 35 to 85%
Storage: 35 to 95%
Bending radius 30 mm min.
Max. pulling force 1.5 N-m max. between the head connector and tube, 1.5 N-m max. between the end cap and
tube, and 2 N-m on the tube itself
Crush weight 29.4 N-m max. on the tube
Head connector
Nickel-plated brass
End cap
p
Tube Stainless (SUS304)

F3UV F3UV
6
Engineering Data
Monitors with Built-in Amplifiers
Output Characteristics
F3UV-A30
(Output
characteristics when the output is
set at 5 V for a UV intensity of 30 mW/cm
2.)
F3UV-A03
(Output characteristics when the output is
set at 5 V for a UV intensity of 3 mW/cm
2.)
Angular Characteristics
F3UV-A30/-A03 F3UV-A30/-A03
and F39-HU1 Cover (Sold Separately)
UV power monitor output (V)
UV intensity (mW/cm2)
Relative sensitivity (%)
Angle (degrees)
X-axis relative sensitivity (%)
Relative sensitivity (%)
Angle (degrees)
UV power monitor output (V)
UV intensity (mW/cm2)
X-axis relative sensitivity (%)
Y-axis relative
sensitivity (%) Y-axis relative
sensitivity (%)
Monitors with Optical Fibers
Output Characteristics
F3UV-XWj1 + F3UV -HM + F32-300
(Output characteristics when the sensitivity
is
set at 300 mW/cm
2.)
Angular Characteristics (Y-direction)
F3UV-HM
The
output variation in the X-direction is less than
± 10% of F .S. in a full 360 _ rotation.
Sensor output (V)
UV intensity (mW/cm2)
Relative value (%)
Angle (degrees)
Sensitivity Characteristics
All F3UV Models
Intensity (relative)
W avelength (nm)

F3UV F3UV
7
Nomenclature
Monitors with Built-in Amplifiers
F3UV-A30/-A03
Operation
indicator
(orange) Power
indicator
(green)
Sensitivity
adjuster VR
Functions
Name Function
Display
functions
Power indicator Lit green when power supply
is ON.
Operation indicator Lit orange when the analog
output is between 4 and 5 V .
Output
functions
Analog output Outputs a voltage (1 to 5 V)
proportional to the incident
light. (The of fset voltage is
0.2 V min.)
Sensitivity adjuster Sensitivity can be set to the
desired level with this
one-turn adjuster .
Monitors with Optical Fibers
F3UV-XW11/-XW41
Operation indicator
Lit orange: Judgement output ON
Fiber lock
Digital display
Sensitivity setting/threshold up
Light intensity monitor mode (MON)
TEACH: Sensitivity setting
ADJ: Threshold adjustment
(Up button)
Light intensity integral mode (ITG)
TEACH: Stop integration
Zero point setting/threshold down
Light intensity monitor mode (MON)
TEACH: Zero point setting
ADJ: Threshold adjustment
(Down button)
Light intensity integral mode (ITG)
TEACH: Start integration
Measurement/T eaching indicator
Lit green: T eaching OK
RUN
Flashing red: T eaching error
Lit red: Start light intensity
integration
Processing mode switch
Light intensity monitor mode
TEACH: Zero point setting/
sensitivity setting
ADJ:
Threshold adjustment
RUN: Measure light intensity
Light intensity integral mode
TEACH: Start/stop integration
RUN (ADJ): Light intensity integral
Output selection switch
IOUT: Current output (4 to 20 mA)
VOUT: V oltage output (1 to 5 V)
Operation mode switch
MON: Light intensity monitor mode
ITG: Light intensity integral mode

F3UV F3UV
8
Functions
Name Function
Indicator functions
Measurement/
teaching
indicator
• Lit green: T eaching OK
RUN
• Flashing red: T eaching error
• Lit red: Start light intensity
integration
Operation
indicator •
Lit orange: Judgement output ON
Digital display
•Percentage display when operating in
light intensity monitor mode
HI: Greater than 124%
LO: Less than 0%
Output functions
Analog output
(switchable) •Outputs
a current (4 to 20 mA) or voltage
(1 to 5 V) that is proportional to the
incident
light intensity .
Select
current or voltage output with the
output selection switch.
Judgement
output •ON when the incident light intensity is
below the set threshold value.
•OFF when the incident light intensity is
above the set threshold value.
(Includes a short-circuit protection func-
tion.)
Answer-back
output •A one pulse output (1 sec) is generated
when remote teaching has been com-
pleted
normally .
Input functions
Reset input
•This trigger signal starts integration
when
the Unit is in integral mode and the
processing mode is set to “RUN”.
Remote
teaching input
•When the Unit is in monitor mode or
integral mode, teaching is performed
when
a pulse signal is input here.
Threshold setting
function (monitor
mode only)
•The desired threshold value can be set
by pressing the Up and Down buttons.
(The digital display will change in 1%
increments
when the value is set.)
Sensitivity setting function (monitor mode only)
Zero point
setting •Sets
the zero point reference when the
UV light source is OFF .
After teaching, the digital display will
read
“0%”.
Sensitivity
setting •Sets the initial sensitvity when the UV
light source is ON.
After teaching, the digital display will
read
“100%”.
Max. sensitivity
setting •Sets the sensor sensitivity to the
maximum sensitivity.
Min. sensitivity
setting •Sets the sensor sensitivity to the
minimum sensitivity.
Light intensity
monitor function
(Part of the
current/voltage
output switching
function.)
•Displays the digital (%) value
corresponding to the incident light
intensity and outputs the analog
and
judgement outputs.
Light intensity
integral function
(Part of the
current/voltage
output switching
function.)
•Calculates the light intensity integral
value (I) from the incident light intensity
(P) and time (T) using the following
equation:
I = P × T .
Also outputs the integral’s analog
output
simultaneously and displays the
digital (%) value. (Output ON at 100%.)

F3UV F3UV
9
Operation
I/O Circuit Configuration
Monitors with Built-in Amplifiers Monitors with Optical Fibers
Main
Brown
Black
Power supply
(12 to 24 VDC)
Output (1 to 5 V)
Power Operation
Power
(green) Operation (orange)
Display
Reset input
Remote teaching input
Answer-back
output
Judgement
output
Controller,
etc.
Shield
Black
Load Load
Brown 12 to 24 VDC
Analog output
0 V
Gray
Internal
circuit
F3UV-XW11 (NPN Output)
Purple
Pink
Blue
White
Main
circuit
Black
Blue
Output
(1
to
5
V)
0 V
Sensitivity adjuster
Measurement/
teaching
(green/red) Operation
(orange)
Display
Reset input
Remote teaching
input
Answer-back
output
Judgement
output
Shield
White
Black
Load Load
Brown 12 to 24 VDC
Analog
output
0 V
Gray
F3UV-XW41 (PNP Output)
Purple
Pink
Blue
Controller,
etc.
Analog GND
Internal
circuit
Monitors with Built-in Amplifiers
Analog Indications such as Voltage or Current Signals
F3UV-A30/-A03
UV Power Monitor Black
Blue
K3NX-VD2A-T1 +–
Brown

F3UV F3UV
10
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Monitors with Built-in Amplifiers
Main Units
F3UV-A30/-A03 Light receiving window
Mounting holes (3.5 dia.)
7.4 dia.
4 dia.
9.5 dia.
Protective cover screw
hole (M2, depth 6)
Power/Operation
indicators Sensitivity adjuster
Two, M3
Mounting Hole Dimensions
Accessories (Sold Separately)
Protective Tube (Protects Cord.)
F39-CU1M End Cap (Note 1)
5 dia. Two, M2
7 dia.
Tube (Note 2)
Head Connector (Note 1)
15 dia.
9.75 dia.
12 dia.
15 dia.
7 dia.
Tube internal
diameter: 5
8.5 dia.
Hex head
set screws
Note: 1. Material: C3504 (nickel-plated brass)
2. Material: Stainless steel (SUS304)
3. M2 securing screws are included.
Installed Protective T ube
Protective Cover (Protects Display.)
F39-HU2
1/6.5 Filtering Cover
F39-HU1
Material: Stainless steel (SUS304-CSP)
t = 0.2
Material: Stainless steel (SUS304-CSP)
t = 0.2
Installed Protective Cover
Installed 1/6.5 Filtering Cover
Two light receiving windows
2.5 dia.
Two, dia. 1
Two, 3.5 dia. Optical
axis
F39-L9 Mounting Bracket (sold separately)
Optical axis