Panasonic KX-HDV430 Owner's manual

Document Version 2016-11
Model No.
SIP Phone
KX-HDV430
Supplement for Administrator Guide
Please use this supplement manual together
with the latest English Administrator Guide.

1. Additional Information for Specifying the Server Address
1.1 Basic format
Format: <scheme>://<user>:<password>@<host>:<port>/<url-path>/<file name>
* The server name (<host>) may be the IP address or the domain.
* Maximum length: 384 characters
1.2 Macros used with file names
Macro Format {XXXX} Macro Expansion
{MAC}
If the URL contains {MAC}, it will be replaced with the
device’s MAC address in uppercase letters.
Example: {MAC} → 0080F0C571EB
{mac}
If the URL contains {mac}, it will be replaced with the
device’s MAC address in lowercase letters.
Example: {mac} → 0080f0c571eb
{MODEL}
If the URL contains {MODEL}, it will be replaced with
the device’s model name.
Example: {MODEL} → KX-HDV430
{fwver}
If the URL contains {fwver}, it will be replaced with the
device’s firmware version.
Example: {fwver} → 01.000
Note
• Macros distinguish between uppercase and lowercase letters.
• Macros not specified above will be treated as strings of characters.
1.3 Target WEB Settings/Configuration Parameters
WEB Setting Configuration Parameter
DHCP Host Name DHCP_HOST_NAME
Standard File URL CFG_STANDARD_FILE_PATH
Product File URL CFG_PRODUCT_FILE_PATH
Master File URL CFG_MASTER_FILE_PATH
- CFG_ROOT_CERTIFICATE_PATH
- CFG_CLIENT_CERT_PATH
- CFG_PKEY_PATH
Firmware File URL FIRM_FILE_PATH
HTTP User Agent HTTP_USER_AGENT
-XMPP_ROOT_CERT_PATH
-XMPP_CLIENT_CERT_PATH
-XMPP_PKEY_PATH
-LDAP_ROOT_CERT_PATH
-LDAP_CLIENT_CERT_PATH
-LDAP_PKEY_PATH
-LANGUAGE_PATHx
-WEB_LANGUAGE_PATHx
User Agent SIP_USER_AGENT
-SIP_TLS_ROOT_CERT_PATH
-SIP_TLS_CLIENT_CERT_PATH
-SIP_TLS_PKEY_PATH
-POWER_ON_DISPLAY_LOGO_PATH
2. Additional Information for Specifying the LDAP Server
Add "ldap://"or "ldaps://" before the LDAP server address.
(Example) LDAP_SERVER="ldap://141.170.10.178"

KX‐HDV430SoftwareFileVersion02.100orlater
1. 4.2.2 Network Status
Change the followings in " Setting Mode " on page 61.
(Before)
Value Range
(After)
Value Range
2. 4.3.2 Ethernet Port Settings
Add the following WEB setting.
Enable CDP
Description
Value Range
Default Value
Configuration File Reference
Packet Interval
Description
Value Range
Default Value
Configuration File Reference
3. 4.6.1 Call Control
Add the following WEB setting.
Group Call Pickup
Description
Value Range
Default Value
Configuration File Reference
Barge in
Description
Value Range
Default Value
Configuration File Reference
Specifies the feature number for performing group call pickup.
0–4 digits (0–9, *, #)
Not stored.
NUM_PLAN_PICKUP_GROUP
Specifies the feature number for performing barging in.
0–4 digits (0–9, *, #)
Specifies the interval, in seconds, between sending CDP frames.
1 - 3600
30
CDP_INTERVAL
• Disable
• LLDP
• Manual
• Disable
• LLDP
• CDP
• LLDP/CDP
• Manual
Selects whether to enable the CDP feature.
・Yes
・No
No
CDP_ENABLE
Not stored.
NUM_PLAN_BARGE_IN

Private Hold
Description
Value Range
Default Value
Configuration File Reference
4. 4.6.4 Flexible Key Settings (No. 1–24)
Change the followings in " Type" on page 129.
(Before)
Value Range
(After)
Value Range
• One Touch Dial
• BLF
• Line
• ACD
• Wrap Up
• Line Status
• Call Forward
• Phonebook
• Call History
• Simultaneous Ring
• Hoteling (Hospitality)
• Transfer
• Blind Transfer
• Conference
• Directed Call Pickup
• Call Park
• Call Park Retrieve
・Network Camera
• One Touch Dial
• BLF
• Line
• ACD
• Wrap Up
• Line Status
• Call Forward
• Phonebook
• Call History
• Simultaneous Ring
• Hoteling (Hospitality)
• Transfer
• Blind Transfer
• Conference
• Directed Call Pickup
• Call Park
• Call Park Retrieve
・Group Call Pickup
・Network Camera
Selects whether to enable or disable private hold.
・Yes
・No
No
PRIVATE_HOLD_ENABLE

5. 4.6.9 DSS Console
Change the followings in " Type" on page 141.
(Before)
Value Range
(After)
Value Range
• One Touch Dial
• BLF
• Line
• ACD
• Wrap Up
• Line Status
• Call Forward
• Phonebook
• Call History
• Simultaneous Ring
• Hoteling (Hospitality)
• Transfer
• Blind Transfer
• Conference
• Directed Call Pickup
• Call Park
• Call Park Retrieve
・Network Camera
• One Touch Dial
• BLF
• Line
• ACD
• Wrap Up
• Line Status
• Call Forward
• Phonebook
• Call History
• Simultaneous Ring
• Hoteling (Hospitality)
• Transfer
• Blind Transfer
• Conference
• Directed Call Pickup
• Call Park
• Call Park Retrieve
・Group Call Pickup
・Network Camera

6. 5.3.1 System Settings
Add the following configuration parameter.
AUTO_INPUT_KEY_TIME
Value Format
Description
Value Range
Default Value
START_DIAL_POUND_KEY
Value Format
Description
Value Range
Default Value
CALL_SETTINGS_MENU_ENABLE
Value Format
Description
Value Range
Default Value
LCD_SCREEN_TIMEOUT
Value Format
Description
Value Range
Default Value
LCD_ACTIVE_LEVEL
Value Format
Description
Value Range
Default Value
INTEGER
Specifies the length of time before the LCD backlight turns off when the unit is
idle.
・0: 30sec
・1: 1min
・2: 5min
・3: 10min
・4: 30min
・5: 60min
・6: 120min
・7: 180min
・8: 300min
・9: Always On
1
INTEGER
0–8
Specifies the backlight level of the LCD when it is active.
Y
BOOLEAN
Specifies whether the "Call Settings" setting is displayed in MENU.
・Y: Displayed
・N: Not displayed
INTEGER
Specifies the number of seconds after which the cursor automatically moves
to the next position during character input.
0–3
[0: off]
0
BOOLEAN
Specifies whether to send the dialed number when the '#' key is pressed
during pre-dialing.
・Y: Enable dialing by using '#'
・N: Disable
N
8

LCD_INACTIVE_LEVEL
Value Format
Description
Value Range
Default Value
DSS_LCD_ACTIVATION
Value Format
Description
Value Range
Default Value
DSS_LCD_BACKLIGHT
Value Format
Description
Value Range
Default Value
DSS_LCD_CONTRAST
Value Format
Description
Value Range
Default Value
DELAY_RING_TIME_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
OFF_HOOK_MONITOR_ENABLE
Value Format
Description
Value Range
Default Value
1–6
INTEGER
Specifies the contrast level of DSS units' LCD.
0
BOOLEAN
Specifies whether to enable or disable the Off-hook Monitor function.
・Y: Enable Off-hook Monitor
・N: Disable
Ｙ
3
6
1–6
INTEGER
Specifies the backlight level of the LCD when it is inactive.
INTEGER
・0: Off
・1: On
・2: Auto
・0: Off
・1: Low
0
2
Specifies the activation of the backlight of DSS units' LCD.
INTEGER
Specifies the backlight level of DSS units' LCD.
DELAY_RING_TIME_1, DELAY_RING_TIME_2,…,DELAY_RING_TIME_16
INTEGER
Specifies the length of time, in seconds, until the unit rings.
0–30
0: Disable

PRIVATE_HOLD_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CONF_OWNER_OUT_ENABLE
Value Format
Description
Value Range
Default Value
PCAP_ENABLE
Value Format
Description
Value Range
Default Value
PCAP_REMOTE_ID
Value Format
Description
Value Range
Default Value
PCAP_REMOTE_PASS
Value Format
Description
Value Range
Default Value
PCAP_REMOTE_PORT
Value Format
Description
Value Range
Default Value
BOOLEAN
Specifies whether to enable or disable private hold.
・Y: Enable private hold
・N: Disable
N
Private Hold
BOOLEAN
Empty string
STRING
Specifies the password of the IP phone whose packets will be captured using the
Wireshark utility (PCAP Remote).
0, 6–64 characters
Empty string
INTEGER
Specifies the port of the IP phone to use for capturing packets using the
Wireshark utility (PCAP Remote).
1–65535
2002
BOOLEAN
Specifies whether to enable or disable packet capturing using the Wireshark
utility (PCAP Remote).
・Y: Enable PCAP Remote
・N: Disable
N
STRING
Specifies the ID of the IP phone whose packets will be captured using the
Wireshark utility (PCAP Remote).
1–16 characters
Specifies whether to allow the remaining two parties in a three-party conference
to continue the conversation if the conference originator leaves the conference
call (Unattended Conference).
・Y: Enable Unattended Conference
・N: Disable
N

DTMF_OUT_ENABLE
Value Format
Description
Value Range
Default Value
CANCEL_OPERATION_MODE
Value Format
Description
Value Range
Default Value
7. 5.3.3 Ethernet Port Settings
Add the following configuration parameter.
CDP_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CDP_INTERVAL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
8. 5.3.10 XML Settings
Add the following configuration parameter.
XML_PHONEBOOK_URL
Value Format
Description
Value Range
Default Value
Max.256 characters
Empty string
Packet Interval
Specifies the URL to download the XML phonebook file from.
BOOLEAN
N
Enable CDP
Specifies the interval, in seconds, between sending each CDP frames.
1–3600
INTEGER
Specifies the operation of the [CANCEL] button when a line is in use.
0: Cancel the current operation
1: Return to standby mode
BOOLEAN
Specifies whether received outband DTMF signals are output audibly.
・Y: Enable audible outband DTMF
・N: Disable
Y
0
STRING
30
・Y: Enable CDP
・N: Disable
INTEGER
Specifies whether to enable the CDP feature.

XML_PHONEBOOK_CYCLIC_INTVL
Value Format
Description
Value Range
Default Value
XML_CURSOR_SKIP_ENABLE
Value Format
Description
Value Range
Default Value
XMLAPP_URL_REDIAL_KEY
Value Format
Description
Value Range
Default Value
9. 5.3.14 Call Center Settings
Add the following configuration parameter.
UC_HOTELING_MODE
Value Format
Description
Value Range
Default Value
UC_FLEXIBLESEATING_UNLOCKPIN
Value Format
Description
Value Range
Default Value
0: Hoteling not supported
1: Hoteling supported
2: Host
3: Guest
0
STRING
Specifies the unlock PIN for Flexible Seating.
4–10 digits
Empty string
・Y: Enable skipping the cursor display on line 1 (id=1)
・N: Disable
N
STRING
When the redial key is defined by an XML element, specifies the URL that is
accessed when the [REDIAL] key is pressed.
Max.256 characters
(The ampersand [&] character is available)
Empty string
INTEGER
INTEGER
Specifies the interval, in minutes, between periodic checks for updates to the
XML phonebook. If this parameter is set to "0", the timing is the same as that
for updating the configuration files.
0, 1–40320
0
BOOLEAN
Selects whether to skip displaying the cursor on line 1 (id=1) of the display on
the XML menu.
Specifies the Flexible Seating mode. This service allows a guest to use the host's
device as his own.