Panasonic TDA30 User manual

Panasonic
TDA30
Quick Reference Guide

TDA30 Quick Reference Guide
Enter Programming Mode
From extension 101, press PROG
Press * # followed by password 1234
The handset will display Sys-Pgm No?
System Time & Date
Enter programming mode as described above
Press 000 and the handset will display Date & Time Set
Press enter
Change the date settings, then press the AUTO DIAL/STORE key
on the handset
The key will light up in red and a tone will sound to confirm the
settings have been saved
Press the down arrow to scroll to time settings and change as
needed
Press the AUTO DIAL/STORE key on the handset again to save
settings
Change Extension Names
Enter programming mode as described above
Press 004 and the handset will display Ext Number
Press enter
Select the extension number you wish to change the name for
Enter the new name using the keys on the handset
Press the AUTO DIAL/STORE key on the handset to save
Scroll up or down to change more names as needed
Program Extension Key
Press PROG.
Press the key you would like to program.
Press 1 on the number pad and enter desired extension
number.
To save, press AUTO DIAL/STORE.

Speed Dial Keys
Press PROG.
Press the key you would like to program.
Press 2 on the number pad and enter 0 (outside line) followed
by the phone number.
To save, press AUTO DIAL/STORE.
Pick Up Incoming Call
Go off hook, then dial * 4 0 0 1, or to pick up from another
specific ringing extension, dial * 4 1, followed by their extension
number.
The call will now connect.
Group Paging
Go off hook, then dial * 3 3 0 1.
Begin the announcement after the tone.
Forward Extension
Go off hook, then dial * 7 1 0 followed by:
o2for immediate forward
o5for busy/no answer forward
Then enter destination (For example, extension 101, or 0
followed by phone number).
Press #.
Call Transfer to another Extension
During a call, press TRANSFER followed by the extension
number you wish to transfer the call to.
Wait for the extension to answer, then announce the call, or
simply hang up and wait for them to answer.
The caller will be on hold until the extension answers.
Conference Call
During the initial call, press CONF.
Select another outside line, then dial a phone number.
When the call connects, press CONF again to link the two calls.
To add more parties, repeat this process.

Place a Call on Hold
While on a call, press HOLD.
The line key will appear flashing green on your handset and
flashing red on any other handset.
Last Number Dialling
Go off hook and press the REDIAL key.
Wait for the call to connect.
Call Log
Press MENU.
Scroll down to Incoming Call Log or Outgoing Call Log.
Press enter.
Scroll list up or down to check the log.
Please note that this feature is only available if installed.
Background Music
Go off hook and dial * 7 5 1 1 to turn on.
Go off hook and dial * 7 5 1 0 to turn off.
Do Not Disturb
Go off hook and dial * 7 1 0 1 to turn on Do Not Disturb.
Go off hook and dial * 7 1 0 0 to turn off Do Not Disturb.
This feature is set per extension and not for the entire system.
JSL Forum Ltd 412 Cranbrook Street N Cranbrook, BC, V1C 3R6 250.417.0042 www.jslforum.com