ParaBody Parabody 844 Lat Option User manual

1
844 LAT OPTION
CLASSH
PART # 7079701
REV. B Revision: 06/19/01
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 844107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Parts list..........................4
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Assembly Instructions.....4-14
General Maintenance.......15
Warranty Statement..........16
Product Services..............17
Insert-Registration Card
©

IMPORTANT NOTES
Please note:
Tools Required forAssembly
* Thank you for purchasing the ParaBody 844 Lat Option. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
3
NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* Tape measure

4
PARTS LIST
PART #
6608708
6608508
6274402
6275302
6609002
6610402
6546302
6609308
3116101
3116201
6610501
6576201
6176201
6542402
3103102
3102933
3102922
3102904
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
QTY
1
1
1
1
1
1
1
1
1
5
1
1
2
2
4
2
5
2
PART #
3102915
3102501
3102802
6480301
3102953
3102910
3102502
3102801
6692601
3119301
6236701
3116001
6140701
6177001
3103801
3108102
6075906
DESCRIPTION
3/8X3-1/4”BOLT
3/8”WASHER
3/8”LOCKNUT
3/8”FLANGESPACER
1/2X2-3/4”BOLT
1/2X 3”BOLT
1/2”WASHER
1/2”LOCKNUT
3X 2”END CAP
2-1/2”ROUNDENDCAP
1-3/4”SQ.END CAP
1-1/4”SQ.RUBBERBUMPER
1X1”GLIDE
NON-SKIDSTRIP
5/16”SNAPLINK
1/4”QUICK DISCONNECTLINK
12LINKCHAIN
QTY
2
10
11
8
1
3
4
2
1
2
1
1
8
2
3
1
1
DESCRIPTION
UPRIGHT
TOPBOOM
LOWROWBAR
LATBAR
LOWROWATTACHMENT
KNEESUPPORT
CARRIAGE
LOWPULLEYHOUSING
4-1/2”PULLEY
3-1/2”PULLEY
LATCABLE
LOWROWCABLE
ROLLERPAD
1-3/4”X 5-1/4”PLATE
1X8”GRIP
3/8X 2”BOLT
3/8X2-3/4”BOLT
3/8X 3”BOLT
KEY
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
FIGURE 1
STEP 1:
• Inserttwo2-1/2”ROUNDENDCAPS(28) to the LOW ROWATTACHMENT(5)asshowninFIGURE1.
• Attach two NON-SKID STRIPS (32) to the LOW ROWATTACHMENT(5) as shown in FIGURE 1.
5
32
28

5
FIGURE 2
STEP 2:
• SECURELY assemble the UPRIGHT (1) to the LOW PULLEY HOUSING (8) using two 1/2 X 3” BOLTS (24), two 1/2” WASH-
ERS (25), and one 1/2” LOCK NUTS (26). See FIGURE 2.
0123456
1/2 1/2 1/2 1/2 1/2 1/2
1
5
20
21
POWER RACK
3/8 X 3-1/4” 19
20
26
1/2 X 3” 24
25
8
• Assemble the LOW ROWATTACHMENT (5) and the LOW PULLEY HOUSING (8) to the POWER RACK using two
3/8 X 3-1/4” BOLTS (19), four 3/8” WASHERS (20), and two 3/8” LOCK NUTS (21). See FIGURE 2.

6
STEP4:
FIGURE 4
• CAREFULLY slide the CARRIAGE (7) over the UPRIGHT (1) as shown in FIGURE 4.
7
1
FIGURE 3
STEP3:
• Apply eight 1” SQ. GLIDES (31) to the inside of the CARRIAGE (7) as shown in FIGURE 3.
• Attach one 1-1/4” SQ. RUBBER BUMPER (30) to the bottom of the CARRIAGE (7) as shown in FIGURE 3.
31
30
31
7

CABLE DIAGRAM
7
0123456
1/2 1/2 1/2 1/2 1/2 1/2

8
• SECURELY assemble three 3-1/2” PULLEYS (10) to the TOP BOOM (2) using three 3/8 X 2-3/4” BOLTS (17), six 3/8”
FLANGE SPACERS (22), and three 3/8” LOCK NUTS (21). See FIGURE 5. (NOTE: BEFORE TIGHTENING, MAKE SURE
CABLE (11) IS IN THE GROOVES OFTHE PULLEYS.)
STEP5:
• Insert one 2 X 3” END CAP (27) into the TOP BOOM (2) as shown in FIGURE 5.
• Route threaded end of the LAT CABLE (11) through the TOP BOOM (2) as shown in FIGURE 5.
FIGURE 5
22
17 3/8 X 2-3/4
11
21
10
22
27
2

9
0123456
1/2 1/2 1/2 1/2 1/2 1/2
STEP6:
FIGURE 6
• SECURELY assemble the TOP BOOM (2) to the UPRIGHT (1) using one 1/2 X 2-3/4” BOLT (23), one 1/2 X 3” BOLT (24), two
1/2” WASHERS (25), and one 1/2” LOCK NUT (26). See FIGURE 6.
• SECURELY assemble the TOP BOOM (2) to the top of the POWER RACK using two 3/8 X 3” BOLTS (18), four 3/8” WASH-
ERS (20), and two 3/8” LOCK NUTS (21). See FIGURE 6.
POWER RACK
21 2
23
20
1
25
26
18
24

10
STEP7:
FIGURE 7
• Loop the LAT CABLE (11) around one 3-1/2” PULLEY (10) as shown in FIGURE 7.
• LOOSELY assemble the 3-1/2” PULLEY (11) to the1-3/4 X 5-1/4” PLATES (14) using one 3/8 X 2” BOLT (16) and one 3/8”
LOCK NUT (21). See FIGURE 7.

STEP8:
FIGURE 8
• Attach the LAT CABLE (11) to the CARRIAGE (7) using one 1/4” QUICK LINK (34) as shown in FIGURE 8. (IMPORTANT!
Securely tighten QUICK LINK.)
!IMPORTANT!
SECURELY
TIGHTEN
34
7
FIGURE 9
STEP 9:
• Loop the ball end of the LOW ROW CABLE (12) around one 4-1/2” PULLEY (9) and SECURELY assemble the 4-1/2” PULLEY
(9) to the LOW PULLEY HOUSING (8) using two 3/8 X 2-3/4” BOLTS (17), two 3/8” FLANGE SPACERS (22), two 3/8” WASH-
ERS (20), and two 3/8” LOCKNUTS (21). (NOTE: Make sure CABLE is routed between the PULLEY and the retaining bolt
as shown in FIGURE 9.)
11
3/8 X 2-3/4” 17
8
21
23
20
9
0123456
1/2 1/2 1/2 1/2 1/2 1/2

12
STEP10:
FIGURE 10
• Loop the LOW ROW CABLE (12) around one 3-1/2” PULLEY (10) as shown in FIGURE 10.
• LOOSELY assemble the 3-1/2” PULLEY (10) to the 1-3/4 X 5-1/4” PLATES (14) using one 3/8 X 2” BOLT (16) and one 3/8”
LOCK NUT (21). See FIGURE 10.
• SECURELY tighten the two 3/8 X 2” BOLTS (16) of the 1-3/4 X 5-1/4” PLATES (14).
STEP11:
FIGURE 11
• SECURELY thread the end of the LOW ROW CABLE (12) 3/4 of the way into into the threaded housing on the LOW PULLEY
HOUSING (8) and SECURELYtighten jam nut.
16 3/8 X 2”
8
12
12
21
10
14

STEP12: FIGURE 12
• Attach the LAT BAR (4) to the ball end of
theLATCABLE (11)usingone SNAPLINK
(33) as shown in FIGURE 12..
4
11
33
• Slide two 1 X 8” GRIPS (15) over the ends
of the LAT BAR (4) as shown in FIGURE
12.
15
• Attach the LOW ROW BAR (3) to the ball end
of the LOW ROW CABLE (12) using two
SNAP LINKS (33) and one 12 LINK CHAIN
(35) as shown in FIGURE 13.
STEP13:
FIGURE 13 18
3
33
12
• Slide two 1 X 8” GRIPS (15) over the ends of the
LOW ROW BAR (3) as shown in FIGURE 13.
35
13
FIGURE 14
STEP 14:
• Slide two ROLLER PADS (13) onto the KNEE
SUPPORT (6), then insert one 1-3/4” SQ. END
CAP (29) into the end of the KNEE SUPPORT (6)
as shown in FIGURE 14.
29
6
13

FIGURE 15
STEP 15:
• When performing the LAT PULL exercise, insert the KNEE SUPPORT (6) into the hole of the SAFETY RAIL as shown in
FIGURE 15 and simply lower the SAFETY RAIL down until roller pads contact knees.
6
14
SAFETY
RAIL
THIS CONCLUDES THE ASSEMBLY OF THE 844 LAT OPTION

MAINTENANCE
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
15
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your ParaBody customer service representative
at [phone].
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
* Lubricate guide rods with a teflon based (or equivalent) lubricant on a regular basis
Thank you forpurchasing the ParaBody 844 Lat Option.
Please note:
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILLBEASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.

16
NOTES:
LIMITED WARRANTY
ParaBodyextends the following LIMITED WARRANTYtothe original owner of the ParaBody products.The Warrantytermsapply to IN HOME USEONLY.
1. LIMITED WARRANTYONFRAMEAND WELDS. If the frame ofthe ParaBodyproduct ora weld should crack or break, itwill berepaired
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
2. LIMITEDWARRANTYON PARTS. Ifthefollowing partsaredefective in materialor workmanship, ParaBodywill supplyreplacement parts:
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,
ParaBody will repair or replace them, at its option. Terms: Three (3) years.
4. CONDITIONSAND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of
ParaBody will void this Limited Warranty.
5. REPLACEMENTAND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is
responsiblefor all othercosts. Such costsmay include, butare notlimited to: a. laborcharges forservice, removal, repair or reinstallation
oftheParaBody product oranycomponent part; b.shipping, delivery,handlingand administrative chargesforreturning parts toParaBody;
and c. all necessary or incidental costs related to installation of the replacement parts.
6. SHIPPING. Ifshipping bythe Owners isdeemed necessary (insole discretionof ParaBody), partsshould beshipped in theiroriginal carton
orequivalent packaging, fully insured withshipping chargesprepaid. ParaBody will not assume anyresponsibility forany loss or damage
incurredin shipping.
7. CLAIM PROCEDURES. Ifservice onyour ParaBodyproduct isrequired duringthe warrantyperiod, please contact our Customer Service
Departmentat1-800-328-9714forinstructionsregardingreturning or replacing parts. Please haveavailablethefollowinginformation: (i) the
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly
drawingincluded withyour assemblyinstruction); (iv) a description of the nature of the problem.
8. OWNER’SRIGHT. ThisLimitedWarrantygives you specificlegal rights. Youmayalso have otherrights,which vary dependingon local law.
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater
duration than the warranty period set forth above. There are no warranties which extend beyond the description inthis Limited Warranty.
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.
10. DISCLAIMER. No other express warranty has been made or will be made on behalf of ParaBody with respect to any ParaBody product or
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury, loss of use of the ParaBody
product,inconvenience, lossor damage to personal property, whether direct or indirect, and incidental or consequential damages, so the
above limitation or exclusion may not apply to you.

INTERNATIONALOFFICES
LifeFitnessAtlanticBV
AtlanticHeadquarters
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
Life Fitness Japan
8/F, Nippon Brunswick Building
5-27-7Sendagaya
Shibuya-Ku, Tokyo 151-0051
Japan
Phone: [phone]
Fax:[phone]
Life Fitness (UK) Ltd.
QueenAdelaide
Ely,Cambs CB7 4UB
United Kingdom
Phone CSS: [phone]
Fax CSS: [phone]
Life Fitness Benelux N.V.
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
LIFE FITNESS
14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A.
Tel: [phone] Fax: [phone]
800.328.9714 (Toll-free within the U.S. and Canada)
www.parabody.com
17
LifeFitnessEUROPEGmbH
Siemensstrasse 3
85716Unterschleissheim
Germany
Phone: [phone]
Fax: [phone]
Life Fitness Italia S.R.L.
Via Elvas 92
39042Bressanone
Italy
Phone: [phone]
Fax: [phone]
Life FitnessAsia Pacific Limited
Room 2610, MiramarTower
132 Nathan Road,Tsimshatsui
Kowloon, Hong Kong
Phone: [phone]
Fax: [phone]
Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2
3ºandar (Confab)
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Brazil
Phone:[phone]
Fax:[phone]