Paradox K35 User manual

Partition Status
Zone
Status
Quick Menu Programming
(press once + [MASTER
CODE])
AC Light (ON* = power ON
OFF = power OFF)
StayD Light (ON* = StayD ON
OFF = StayD OFF)
* Icon shown on screen
How To Arm
Arming When Exiting (Regular Arm)
To arm your system when exiting:
How To Disarm
To disarm your system when entering:
Arming When Staying (Stay / Sleep Arm)
To arm your system when staying:
‡If needed, press button(s) corresponding to desired partition(s). For two partitions, press the other key after the confirmation beep.
Step Description
1. Close all zones in the desired partition.
2. Enter your [ACCESS CODE]‡ or [ARM] +
[ACCESS CODE].
Step Description
1. Press [OFF] and enter your [ACCESS
CODE]‡.
Step Description
1. Press [STAY] for stay arming or [SLEEP] for
sleep arming and then enter your [ACCESS
CODE]‡.
[TBL] Trouble display
On = Trouble(s) occurring
[MEM] Alarm memory display
On = Alarm(s) occurred
[BYP] Bypass programming
On = Zone(s) bypassed
Zone Display:
The numbers [1] to [32]
correspond to zones 1 to 32
respectively. Open or entry
delay zones are illuminated,
and flash in alarm.
Quick Start
K35 Keypad
Arm / Sleep / Stay:
On = Partition armed
Off = Partition disarmed
Flash = Exit Delay
Fast Flash†=Exit Delay (final
10 sec.)
Fast Flash†= Partition in alarm
K35-EQ02
Printed in Canada - 09/2019 PARADOX.COM
†Audible Indicators:
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep = Beginning of
exit delay
Fast beep = Final 10 sec. of
exit delay

Panic Alarms
To send a silent or audible alarm to your monitoring
station, press and hold one of the key combinations
listed below, for 3 seconds.
Trouble Display
How to Bypass Zones
When a zone is bypassed, it remains unarmed when
the corresponding area is armed. To bypass zones:
Alarm Memory Display
To view the alarms that occurred during the last
armed period:
Keypad Settings
To mute the keypad:
To modify the backlight:
Chime Programming
A Chime Enabled zone will advise you every time it is
opened by causing your keypad to beep.
Panic Alarm Key Combinations
Police Keys [1] & [3]
Medical Keys [4] & [6]
Fire Keys [7] & [9]
Step Description
1. Press [TBL]. The word ‘Trouble’
and the number(s) corresponding to the
trouble(s) will be displayed on the screen.
2. Read the corresponding explanation of the
trouble from the trouble list in the MG/SP
User Guide. If no repair instructions are
given, call your security company for
repairs.
3. Press [CLEAR] to exit.
Step Description
1. Press [BYP].
2. Enter your [ACCESS CODE].
3. The corresponding zone number will be
displayed on the screen when open. Select
the zone(s) you want to bypass by entering
the two-digit zone number. For example, to
enter zone 3 enter [10] then [3]. The
corresponding zone indicator will flash.
4. Press [ENTER] to save and exit.
Step Description
1. Disarm the system.
2. Press [MEM].
3. The corresponding zone numbers that were
in alarm the last time the system was armed
will appear on the screen.
4. Press [CLEAR] to exit.
Step Description
1. Press and hold [CLEAR] for 6 seconds to
enable or disable Keypad Muting.
Step Description
1. Press and hold [] for 4 seconds.
2. Keys 1, 2, 3, 5 and 6 will flash.
3. Press [2], then use the [] and [] to
adjust.
4. Press [CLEAR] or [ENTER] to exit.
Step Description
1. Press and hold [ ]. The word ‘Chime’ will
appear on the screen.
2. Select the zones you want to Chime by
entering the two-digit zone number. The
corresponding zone number will flash. For
example, to chime zone 2 enter [0] then [2].
The keypad will automatically save once
the 2-digit zone number is entered.
3. Press [ENTER] to exit.
© 2019 Paradox Security Systems (Bahamas) Ltd.
All rights reserved. Specifications may change without prior
notice. For complete patent, trademark, certification, and
warranty information, please visit paradox.com.