Parker Racor RK11868 User manual

Bowl Deflector
Kits
RK11868 and
RK15104
Warning!
This kit is for use only with bowls featuring the SAE J1926 o-ring
gland (see below), otherwise a fuel leak may occur leading to
a fire. If no gland area is present, order correct bowl kit; 500
Series - RK15279-01, 900 or 1000 Series - RK11-1606-1.
Parker Hannifin Corporation
Racor Division
PO Box 3208, 3400 Finch Rd
Modesto, CA 95354 USA
209-521-7860/800-344-3286
www.parker.com/racor
[e-mail]
Current Design
(has SAE J1926 o-ring
gland area)
Old Design
(no o-ring gland area)
—See Other Side—
Bowl Deflector
Kits
RK11868 and
RK15104
Warning!
This kit is for use only with bowls featuring the SAE J1926 o-ring
gland (see below), otherwise a fuel leak may occur leading to
a fire. If no gland area is present, order correct bowl kit; 500
Series - RK15279-01, 900 or 1000 Series - RK11-1606-1.
Parker Hannifin Corporation
Racor Division
PO Box 3208, 3400 Finch Rd
Modesto, CA 95354 USA
209-521-7860/800-344-3286
www.parker.com/racor
[e-mail]
Current Design
(has SAE J1926 o-ring
gland area)
Old Design
(no o-ring gland area)
—See Other Side—
Bowl Deflector
Kits
RK11868 and
RK15104
Warning!
This kit is for use only with bowls featuring the SAE J1926 o-ring
gland (see below), otherwise a fuel leak may occur leading to
a fire. If no gland area is present, order correct bowl kit; 500
Series - RK15279-01, 900 or 1000 Series - RK11-1606-1.
Parker Hannifin Corporation
Racor Division
PO Box 3208, 3400 Finch Rd
Modesto, CA 95354 USA
209-521-7860/800-344-3286
www.parker.com/racor
[e-mail]
Current Design
(has SAE J1926 o-ring
gland area)
Old Design
(no o-ring gland area)
—See Other Side—
Bowl Deflector
Kits
RK11868 and
RK15104
Warning!
This kit is for use only with bowls featuring the SAE J1926 o-ring
gland (see below), otherwise a fuel leak may occur leading to
a fire. If no gland area is present, order correct bowl kit; 500
Series - RK15279-01, 900 or 1000 Series - RK11-1606-1.
Parker Hannifin Corporation
Racor Division
PO Box 3208, 3400 Finch Rd
Modesto, CA 95354 USA
209-521-7860/800-344-3286
www.parker.com/racor
[e-mail]
Current Design
(has SAE J1926 o-ring
gland area)
Old Design
(no o-ring gland area)
—See Other Side—

Installation Instructions
Racor’s policy is one of continual improvement in design and manufacturing
to insure still finer products; therefore, specifications, equipment and product
information (while correct at the time of publication) is subject to change
without notice. Copyright, Parker Hannifin Corporation, 2005.
Instruction Part Number 11-1839 Revision B
1. Install fitting (item 1) into hole in heat deflector (item 2).
2. Place gasket (item 3) onto locator ridge protruding through
inside of heat deflector.
3. Install o-ring (item 4) onto fitting (item 1).
4. Install assembled parts onto bottom of bowl.
1
2
3
4
Partial Cutaway of Marine Turbine Series Assembly
Installation Instructions
Racor’s policy is one of continual improvement in design and manufacturing
to insure still finer products; therefore, specifications, equipment and product
information (while correct at the time of publication) is subject to change
without notice. Copyright, Parker Hannifin Corporation, 2005.
Instruction Part Number 11-1839 Revision B
1. Install fitting (item 1) into hole in heat deflector (item 2).
2. Place gasket (item 3) onto locator ridge protruding through
inside of heat deflector.
3. Install o-ring (item 4) onto fitting (item 1).
4. Install assembled parts onto bottom of bowl.
1
2
3
4
Partial Cutaway of Marine Turbine Series Assembly
Installation Instructions
Racor’s policy is one of continual improvement in design and manufacturing
to insure still finer products; therefore, specifications, equipment and product
information (while correct at the time of publication) is subject to change
without notice. Copyright, Parker Hannifin Corporation, 2005.
Instruction Part Number 11-1839 Revision B
1. Install fitting (item 1) into hole in heat deflector (item 2).
2. Place gasket (item 3) onto locator ridge protruding through
inside of heat deflector.
3. Install o-ring (item 4) onto fitting (item 1).
4. Install assembled parts onto bottom of bowl.
1
2
3
4
Partial Cutaway of Marine Turbine Series Assembly
Installation Instructions
Racor’s policy is one of continual improvement in design and manufacturing
to insure still finer products; therefore, specifications, equipment and product
information (while correct at the time of publication) is subject to change
without notice. Copyright, Parker Hannifin Corporation, 2005.
Instruction Part Number 11-1839 Revision B
1. Install fitting (item 1) into hole in heat deflector (item 2).
2. Place gasket (item 3) onto locator ridge protruding through
inside of heat deflector.
3. Install o-ring (item 4) onto fitting (item 1).
4. Install assembled parts onto bottom of bowl.
1
2
3
4
Partial Cutaway of Marine Turbine Series Assembly