Petsafe Comfort-Fit Deluxe bark control User manual

21-800-732-2677
Thank you for choosing PetSafe®, the #1 selling brand of
electronic training solutions in the world. Our mission is to
ensure your pet’s safety by providing you the tools and techniques
to successfully train your pet. If you have any questions, please
contact the Customer Care Center at 1-800-732-2677 or visit
our website at www.petsafe.net.
____________________________________________________________________
Table of Contents
Components ........................................................................... 3
Features.................................................................................. 3
How the PetSafe Deluxe Bark Control CollarTM Works ............... 4
Key Definitions ....................................................................... 4
Fit the Bark Control Collar...................................................... 5
To Insert and Remove the Battery............................................ 7
Modes of Operation ................................................................ 8
What to Expect During Use of the Bark Control Collar ............ 8
Regular Maintenance .............................................................. 9
To Test the Bark Control Collar ............................................... 9
Accessories ........................................................................... 10
Frequently Asked Questions .................................................. 10
Troubleshooting.................................................................... 11
To Discharge the Bark Control Collar .................................... 11
Terms of Use and Limitation of Liability ................................ 12
____________________________________________________________________
“In a Tuskegee University study of adult shelter dogs wearing the
PetSafe Bark Control CollarTM for six 30-minute sessions over
two weeks, we detected no long-term adverse effects, and all dogs
dramatically reduced their barking by the second day.”
Dr. Janet Steiss and Dr. Caroline B. Schaffer
Tuskegee University

www.petsafe.net 3
Components
Operating Guide
Battery
(PetSafe® RFA-67)
Warranty
Card
War r an ty
PetSafe Deluxe
Bark Control CollarTM
TEST
Features
• Low, Medium and High Modes, each containing 6 levels of progressive
Static Correction
• Patented Perfect Bark technology for the most reliable bark detection
• Water Resistant
• Low Battery Indicator Light
• On/Off Switch
• Lifetime Limited Warranty

41-800-732-2677
How the PetSafe Deluxe Bark Control Collar
TM
Works
The Deluxe Bark Control Collar™ has a unique patented sensor technique
that provides the most reliable bark detection available. The Bark Control
Collar uses both vibration and sound sensors to discriminate each bark from
other external noises. A Static Correction is administered through the Contact
Points only if both the vibration from the vocal cords and the sound from the
bark match the bark sampling criteria.The Bark Control Collar starts with the
lowest level of Static Correction in each mode and then increases through 6
levels each time your dog barks within 30 seconds of the previous bark. If your
dog does not bark again within 30 seconds, the Bark Control Collar will reset
itself to the lowest level of Static Correction in the current mode. Along with
each Static Correction, the Indicator Light will flash. As a built-in safety feature,
if your dog barks 15 times or more within a 50-second period, the Bark Control
Collar will automatically shut off for 3 minutes.
Important:
• Before playing with your dog, remove the Bark Control Collar.
The activity may cause your dog to bark, which could lead to him
associating the play with the Static Correction.
• Never leave the Bark Control Collar on your dog for more than 12
consecutive hours.
____________________________________________________________________
Key Definitions
Indicator Light: Indicates that the Bark Control
Collar is functioning properly in the TEST Mode,
and when the battery is low.
Sound Activated Sensor: Detects the sound of
your dog’s bark.
Mode Switch: Adjusts the levels of Static
Correction your dog receives when barking. This
switch is also used to turn the Bark Control Collar
off, and to test it.
Sensor Probe: Detects the vibrations of your
dog’s bark.
Note:The Sensor Probe is not adjustable.
Contact Points
Battery
Sensor
Probe
Mode
Switch
Indicator Light
Sound Activated
Sensor
test
off
Contact Points: Deliver the safe Static Correction.

www.petsafe.net 5
Fit the Bark Control Collar
Important: The proper fit and placement of your Bark Control Collar
is important for effective operation. The Contact Points must have
direct contact with your dog’s skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure that the battery is not installed in the Bark
Control Collar.
2. Have your dog standing comfortably.
3. Center the Contact Points underneath your dog’s neck,
touching the skin.
YES
NO
Note: It is sometimes necessary to trim the hair
around the Contact Points to make sure that contact
is consistent.
4.The PetSafe QuickFit™
Collar is designed so you
can quickly attach and
remove the Bark Control
Collar from your dog
while maintaining the
desired fit.
a.With the Snap Buckle
fastened, thread the
collar through the
Metal Buckle.
b. Slide the excess collar through the “C” Loop on
top of the Snap Buckle.This will hold the collar in
place.
c. Once the collar fit is determined, simply use the
Snap Buckle to remove and replace the collar.
5.The Bark Control Collar should fit snugly, yet loose
enough to allow one finger to fit between a Contact
Point and your dog’s neck. Allow your dog to wear
the collar for several minutes, then recheck the fit. Check
the fit again as your dog becomes more comfortable with
the Bark Control Collar.
6.Trim the collar as follows:
a. Mark the desired length of the collar with a pen. Allow for
growth if your dog is young or grows a thick winter coat.
b. Remove the Bark Control Collar from your dog and cut
off excess.
Snap Buckle “C” Loop
Metal Buckle

61-800-732-2677
ID Tag Ring
Use the ID Tag Ring to attach your
dog’s ID tags to the collar. Simply
place the ID Tag Ring through one of
the holes on your collar. Make sure
to place the Ring far enough from
receiver housing so that tags will
not hit the Receiver or the Contact
Points.
Important: Do not attach a leash to the collar. This can
result in pulling the Contact Points too tightly against
your dog’s neck. Attach a leash to a separate, non-
metallic collar or harness, making sure the extra collar
does not put pressure on the Contact Points.
Important: For comfort, safety and effectiveness of product, please ensure
the following:
• Check the fit to prevent excessive pressure by being able to insert one
finger between the Contact Point and your pet’s skin.
• Your pet must be carefully examined daily for any signs of a rash or sore.
• If a rash or sore is observed, discontinue the use of the Bark Control
Collar for a few days.
• If the condition persists beyond 48 hours, see your veterinarian.
• Your pet’s neck and the Contact Points must be washed weekly with a
wash cloth and mild hand soap, then rinsed thoroughly.
A condition called Pressure Necrosis, which is a devitalization of the skin
due to excessive and prolonged contact against the Contact Points, may
occur if the steps above are not followed.

www.petsafe.net 7
To Insert and Remove the Battery
Note: Do not install the battery while the Bark Control Collar is on your dog.
This Bark Control Collar utilizes a replaceable PetSafe®battery (RFA-67).This
unique battery is designed to make battery replacement easier and increase
water protection.
To insert the battery, align the symbols
on the battery (arrow) and Bark
Control Collar (triangle). Use a large
coin to turn the battery clockwise
until the arrow lines up with the lock
symbol on the housing.
To remove the battery, turn the
battery counter-clockwise using a large
coin. DO NOT attempt to cut into
or pry open the battery. Be sure to
discard the used battery properly.
A replacement PetSafe®battery (RFA-67) can be found at many retailers.
Contact the Customer Care Center at 1-800-732-2677 or visit our web site
at www.petsafe.net to locate a retailer near you.
Battery Life
Average battery life is 3 to 6 months, depending on how often your dog barks.
However, due to your dog’s learning process, your first battery may not last as
long as replacement batteries.
Indicator Light
The Indicator Light acts as a low battery indicator.While in a Correction Mode,
the light will flash once every 2 to 3 seconds to indicate a low battery.While in
TEST Mode, a low battery will cause the Indicator Light to turn on, and the
Bark Control Collar will not respond to testing until the battery is replaced.

81-800-732-2677
Modes of Operation
• Turn to the OFF Mode when the Bark
Control Collar is not in use to conserve
battery power.
• Begin use of the Bark Control Collar
on the Low Mode and only increase to
the Medium Mode if your dog does not
respond.
• If your dog does not respond to the
Medium Mode, increase to the High
Mode.
• Turn to the TEST Mode to verify that
test
off
Low
Medium
High
Off
Test
your Bark Control Collar is working properly. Do not use this mode for
normal operation. See “To Test the Bark Control Collar.”
____________________________________________________________________
What to Expect During Use of the Bark Control Collar
Important: Do not leave your dog alone the first few times he receives a
Static Correction.
Place the Bark Control Collar properly on your dog and wait nearby until he barks.
Most dogs will understand very quickly that the Bark Control Collar is disrupting their
urge to bark and will relax and stop barking. Some dogs will bark more, and as the
Static Correction from the Bark Control Collar may be surprising or startling, some
dogs may vocalize in response to the initial correction.
Rarely, a dog may get into a bark-correction-bark-correction cycle that could be quite
overwhelming. If this happens, reassure your dog with calm, soothing tones. As your
dog relaxes, he will understand that if he becomes quiet, he will not receive any more
Static Corrections.The small minority of dogs that have this reaction will only have it
the first time they wear the Bark Control Collar.
You should notice a reduction in your dog’s barking within the first couple of days that
he wears the Bark Control Collar. At this point, some dog owners feel that the problem
has been solved, but in most cases the learning process is still not complete. Most dogs
will “test” this new learning experience and will increase their attempts to bark.This
usually occurs during the second week a dog wears the Bark Control Collar. If this does
occur, remain consistent and do not alter your use of the Bark Control Collar.You must
place the Bark Control Collar on your dog in every situation when you expect him to be
quiet. If your dog is not wearing the Bark Control Collar, he may resume barking and
his learning would suffer a setback.

www.petsafe.net 9
Regular Maintenance
• Check Contact Points for tightness weekly
Note: Do not adjust the factory preset Sensor Probe.
• Clean Contact Points with alcohol weekly
Note: Remove the battery and discharge the Bark Control
Collar before touching the Contact Points.
• Check your dog’s neck for irritation and wash neck
weekly.
____________________________________________________________________
To Test the Bark Control Collar
Important: To avoid feeling the Static Correction yourself, never touch
the two Contact Points simultaneously.
1. Turn the Mode Switch to TEST.
2. Hold the unit by the collar with the Indicator Light
facing towards you.The unit should be within 6-10
inches of your mouth.
3. In order to trigger the unit, say “Test” loudly into the
Sound Activated Sensor.
4. The Indicator Light will flash three times to show that it
is functioning properly.
5. If the Indicator Light does not flash, ensure that the
OFF
TEST
LOW
BAT
test
off
TEST!
battery is properly installed, and/or replace the battery. If the Indicator Light
still does not flash, contact the Customer Care Center at 1-800-732-2677.
6. Return the Mode Switch to Low before replacing the Bark Control Collar
on your dog.
Note:The TEST Mode is not intended for normal operation. If the Bark Control
Collar is left in TEST Mode while on your dog, it can cause false correction and may
reduce battery life.

10 1-800-732-2677
Accessories
To purchase additional accessories for your PetSafe Deluxe Bark Control
CollarTM, contact the Customer Care Center at 1-800-732-2677 or visit our
website at www.petsafe.net to locate a retailer near you.
Component Part Number
Battery - two pack RFA-67D-11
If the collar breaks, you do not have to replace the whole unit. The collar
is replaceable; however under normal circumstances there is no need to
separate the collar and receiver. Please contact the Customer Care Center for
replacement collar and instructions.
Frequently Asked Questions
Will my dog stop
barking completely?
• The Bark Control Collar effectively and humanely
stops all barking when it is worn. It should only be
worn during periods of unwanted barking.
Will another dog’s
bark set off the Bark
Control Collar?
• No.
Is the Bark Control
Collar safe and
humane?
• Yes.The Bark Control Collar is designed to get
your dog’s attention, not to punish him. However,
the initial Static Correction may startle your dog.
Will the Bark Control
Collar work for my
dog?
• The Bark Control Collar is safe and effective for all
breeds and sizes of dogs, though it may be too large
for dogs under 8 pounds to wear comfortably.
Can I attach a leash
to the Bark Control
Collar?
• No.This can result in pulling the Contact Points
too tightly against your dog’s neck. Attach a leash to
a separate, non-metallic collar or a harness, making
sure the extra collar does not put pressure on the
Contact Points.