Planet DVR-860 User manual

PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
Email: [email protected] Web site: http://www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
Planet reserves the right to change specifications without prior notice.
All brand names and trademarks are property of their respective owners.
Copyright (c) 2008 PLANET Technology Corp. All rights reserved
Q&A_ How to Hardware Reset DVR-860?
Step 1: Turn off the power and dismount the cover from the unit.

PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
Email: [email protected] Web site: http://www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
Planet reserves the right to change specifications without prior notice.
All brand names and trademarks are property of their respective owners.
Copyright (c) 2010 PLANET Technology Corp. All rights reserved
Step 2: Find the Reset Point (Near rare board).
Step 3: Take a close look at Reset Point (The 2 pinholes with a “R”)

PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
Email: [email protected] Web site: http://www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
Planet reserves the right to change specifications without prior notice.
All brand names and trademarks are property of their respective owners.
Copyright (c) 2010 PLANET Technology Corp. All rights reserved
Step 4: Connect the two jumps (pinholes) to form a short circuit. Then plug in the
power and hold the short circuit for more than 10 seconds.