Polycom SoundPoint IP 331 User manual

Cluana
Polycom Soundpoint IP 331 Configuration guide
This guide is for a Polycom IP phone SoundPoint IP 331, UC Software Version4 0 4 2906
only Different models and / or software versions may require different settings
IP address detection and web management
Assuming a DHCP server is active on your network,
–connect a network cable to your phone LAN port
–power up the phone by plugging the power cable (no need to, if you are using a
PoE switch
–wait for your phone to finish the booting process It should show a date and time on
the upper left (fig 1)
(fig 1)
–press “Menu” button, then “2”, “2”, “1” You should see the assigned IP address, as
in Fig 2 , showing the usage of IP address 192 168 0 173 Let's call it “ip_address”
(fig 2)

–open a web browser to the URL: http://ip_address
–enter the default “456” password and press “Submit” button
IP phone configuration
Let's assume the following:
Your PBX company domain is mycompany.com:505 (chosen when you created your
PBX account)
Your PBX hostname is myserver.cluana.com:505 (provided by Cluana)
Your IP Phone User ID / Auth ID is xten (your choice, 31 in the picture below)
Your analog adapter password is : password (your choice)
After login, set the following parameters :
Settings
Lines
Line 1
Identification
Address: [e-mail]
Authentication User ID: xten
Authentication Password: password
Outbound Proxy
Address: myserver.cluana.com
Port: 505
Server 1
Address: mycompany.com
Port: 505
Expires: 120
Press “Save” button

(fig 3)

Settings
Audio codec Priority
In use
Remove all gray codecs from the “In use:” section, and add the L16 16
codec from the “Unused:” section Reorder the “In use:” codecs so that
L16 16 is first, G 711A is second (G 711Mu for USA and Japan),
G 729AB is third (fig 4)
Press “Save” button
(fig 4)
Settings
SIP
Local Settings
Local SIP port: 5058
Digitmap: empty field
Digitmap Impossible Match: 2 (fig 5)
Press “Save” button

(fig 5)
Preferences
Date & Time
Set your preferred display format, time zone, time server, resync period and
daylight savings parameters A couple of examples are provided for Italy (Fig 6) and UK
(Fig 7)
(fig 6)

(fig 7)