Prevue Hendryx 1620 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL customerservice @ prevuepet.com
1620 — 02/22— A4 Mad in China for Pr vu P t Products, Inc., 224 N Mapl wood Av , Chicago IL 60612 USA • 1 [312] 243-3624 • www.pr vu p t.com • custom rs rvic @ pr vu p t.com
Instructions online at www.prevuepet.com
1PIECES
2PIECES
1620 Casbah Parakeet Cage
ASSEMBLY
MODEL #
TOOL: Needle-nose pliers • For best results, follow the Assembly Steps in the order presented.
Prepare the bas by placing the
grill down into the base and
sliding the tray in from the front.
Set the cag body into the bas , inserting the
wire bump-outs into the openings in the base rim.
nfold the cag body m sh.
First, insert the long p rch on horizontal wires from
side-to-side across the cage at an even height.
Insert the two short
p rch s on vertical wires,
front-to-back in the cage,
and settled down onto the
horizontal wires for
stability.
For each cup, push the
hood of the cup down onto
its base.
Slide the cup doors up to
open and insert the cups.

1620 — 02/22— A4 For mor wond rful cag s, toys, and acc ssori s for cats, birds, chick ns, rabbits, f rr ts, dogs and small animals, visit www.pr vu p t.com
3PIECES
Assembly completed. {
*CLEANING INSTR CTIONS
To prolong the life of your
new Prevue Pet Products
cage, we recommend:
→When cleaning the cage
and parts, use a soft cloth
or non-abrasive scrub
pad (such as Prevue’s #109
Cage Saver).
→Wash all parts with warm
water and a mild, pet-safe,
environmentally friendly
soap.
→Rinse thoroughly.
→Hand dry all parts
completely with a soft dry
cotton cloth before
reassembling the cage.
→Do not leave plastic parts
in the sun to dry as they
may warp.
{1
{2
1
Catch the left side roof
pan l under the hooked
wires on the side panel.
2
Rotate the roof panel
up and catch the
outer wires onto the
extended wire hooks
along each of the
front and back panel
roof lines.
Repeat the same
steps for the right
side roof pan l.
Center the handle on the roof.
With the hooked ends of the handle,
catch both roof wires together and
hold the handle up tight.
Crimp the hooked ends around the
roof wires to hold the roof together
and the handle in place.
Crimp the hooked
wires along the roof
lines to secure the
roof panels in place.
interchangeable