PROAIM CINEMA Series User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Assembly Manua l
Ubangi Mul-Oset Slider Rig
Ubangi Mul-Oset Video Film Camera Slider Rig (SL-UBGI-01)
Mitchell Plate
1 x T-Type Allen Key
(Size: 5mm) Flight Case
Weight Rod

2
INDEX
Sr. No Particulars Page No.
1 Ubangi Slider Rig Setup 3
2 Mitchell Plate Assembly 4
3 Fluid Head Assembly 4-5
4 Camera Mounng 5
5 Weight Rod Assembly 6
6 360° Rotaon Funcon 6-7
7 Sliding Funcon 7
8 Final Setup 8

3
• The Ubangi Mul-Oset Slider Rig is
successfully mounted on the Toro Stand.
• Aer inserng the Locking Knob, ghten it.
• Now, insert the weight rod from above and
insert the knob from boom, as shown in
the image.
• Remove the weight rod of the Slider by
removing its knob.
Ubangi Mul-Oset Slider Rig Setup
• Mount the Ubangi Mul-Oset Slider on the
Toro Stand (Not Included) and ghten it
using the locking knob.
NOTE: Stabilize the Slider in one posion using
our glove-friendly tripod locking knob.

4
• Remove the castle ring of the Fluid Head
(Not Included).
• Mount the Fluid Head on the Mitchell Plate,
as shown in the image.
• Aach the Mitchell Plate and ghten its
knob, as shown in the image.
Mitchell Plate Assembly
• Now, ghten all the bolts of the Mitchell
Plate using the 5mm Allen key.
• Remove the knob of the Mitchell Plate.
Fluid Head Assembly

5
• Aach the Camera Plate to the Camera
(Not Included) and ghten its bolts using a
screwdriver (Not Included).
• Your Camera has been successfully
mounted on the Fluid Head.
• Slide the Camera onto the Fluid Head and
lock it using the locking pin.
• Press the push pin of the Fluid Head and
remove the Camera Plate.
• Aer mounng the Fluid Head, aach the
castle ring and properly mount it.
Camera Mounng

6
NOTE: The Camera can be set horizontally and
vercally on either side of the rig for
boundless creavity and adaptability.
• Aer loosening the side knobs, adjust the
rotaon of the Slider per your requirement.
• Loosen the side knobs of the Ubangi Slider.
• Aer inserng the weight, re-insert the
weight and properly ghten it.
• Remove the weight closer from the weight
rod and insert the weight (Not Included).
Weight Rod Assembly
360° Rotaon Funcon

7
• Loosen the both the locking levers.
• Slide the Ubangi Slider to the le or right
per your requirement.
• Aer posioning the Ubangi Slider,
re-ghten both the side knobs, as shown in
the image.
Sliding Funcon
• Aer seng the posion of the Slider,
re-ghten the locking levers.

8
YOUR PROAIM UBANGI MULTI-OFFSET VIDEO FILM CAMERA SLIDER RIG
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.