PROAIM CAMTREE HUNT User manual

GRAND DSLR CAMERA CAGE KIT
(CH-GRND-CKIT)
INSTRUCTION MANUAL
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by
the applicable copyright statutes or in wring by the Publisher.
CAMTREE HUNT

Camtree Hunt Grand DSLR Camera Cage Kit 2
INTRODUCTION
Camtree Hunt launches its fully funconal combo of camera cage with mae box & follow focus
that guarantees videomakers to capture high impact shots without any trouble. The Robust cage
features a quick release system with a back stop that provides an twisng and is dovetailed for
a secure t. Incorporated into the cage is a push buon safety pin that prevents accidental
release of the base plate. This allows for quick and secure mounng and dismounng of your
camera to the cage. This cage provides easy access to the baery allowing you to replace it
without removing the camera from the cage. (Note: you can not change the GH4 baery as it is
0.20mm short!).It adds full funconality with top and boom mulfunconal rod support for
accessory mounng opons and a super tough top handle makes it easy to carry around &
enables easy handheld shots.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
ASSEMBLING YOUR CAMERA CAGE KIT
 Aach the Dovetail Plate with your tripod plate and mount it on your tripod
Camera Cage
Top Handle Dovetail Plate
150mm Male Rods
300mm Female Rods
MB-20 Mae Box
Flip Follow Focus Gear Ring Speed Crank

Camtree Hunt Grand DSLR Camera Cage Kit 3
 Insert the 300mm long female threaded rods into the cage and ghten the side red knob
 Mount the cage on dovetail plate and secure it with side red knob
 Remove the quick release plate from the cage and aach it with your camera

Camtree Hunt Grand DSLR Camera Cage Kit 4
 Insert the camera with quick release into cage and lock the red lever
 Insert the 150mm male threaded rods and ghten the side knob to secure the rods properly.
 Mount the top handle on the cage and ghten the knob to secure properly.

Camtree Hunt Grand DSLR Camera Cage Kit 5
 Plug your cable and ghten the knob to secure it.
 Aach the gear ring over the lens focusing ring and ghten it with the screw then insert the
follow focus into 15mm rods.
 Tighten the side and boom knob of the follow focus to secure properly.
ASSEMBLING YOUR GEAR RING AND FOLLOW FOCUS

Camtree Hunt Grand DSLR Camera Cage Kit 6
YOUR CAMTREE HUNT GRAND DSLR CAMERA CAGE KIT
ALL DRESSED UP AND GOOD TO GO
 Use the speed crank for the accurate
focusing
 Aach the mae box into 15mm rods and
ghten the knob
(SHOWN WITH OPTIONAL ACCESSORIES)

Camtree Hunt Grand DSLR Camera Cage Kit 7
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.