PROAIM P-HN-DMC User manual

Handy Director Monitor Cage
(P-HN-DMC)
I N S T R UC T I O N M A NU AL
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by
the applicable copyright statutes or in writing by the Publisher.

Proaim Handy Director Monitor Cage 2
INTRODUCTION
The Proaim Handy Director Monitor Cage enables you to be on the go while keeping your moni-
tor safe with an adjustability to t most 5-8” monitors. In addion to holding your monitor, the
cage allows for the mounng of a separately available V-mount plate for baery power, and it
also leaves plenty of room for wireless equipment, so you can remain untethered on set. Com-
fortable foam handgrips aach to the sides of the cage, great for carrying around and checking
shot composion from anywhere. The front of the monitor is unimpeded, so you can mount sun
hoods or other accessories. The two adapters make it compable with Convergent Design Odys-
sey 7, Odyssey 7Q+ (LCD).
CONTENTS OF SHIPPING BOX:
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is pic-
tured and listed below.
(1/4” x 3/8”) SS Buon Head - 6pcs
(1/4” x 5/8”) SS Buon Head - 4pcs
4mm Allen Key - 1pc
(5mm x 20mm) Knob - 10pcs
(6 x 12 x 2mm) Plasc Black Washer - 25pcs
(5 x 10 x 2mm) Plasc Black Washer - 25pcs
(6 x 10 x 1mm) SS Washer - 5pcs
2 x Main
Bracket
Base with V-Mount
Baery PlateStrap
2 x Side
Handle
2 x Oset
Bracket
4 x Side
Bracket
2 x Height
Adjuster

Proaim Handy Director Monitor Cage 3
ASSEMBLING OF PROAIM HANDY DIRECTOR MONITOR CAGE
There are two ways to assemble the Proaim handy director monitor cage.
I: Vercal Mounng
II: Horizontal Mounng
STEPS FOR VERTICAL MOUNTING
Horizontal mounng is required if in case the LCD dimension varies or your LCD has the top mounng or
boom mounng.
 Aach the oset bracket to V-Mount baery plate base and select the (1/4” x 3/8”) SS Buon
Head for ghtening the oset bracket.
 Now aach the main bracket to oset bracket and select the (1/4” x 5/8”) SS Buon Head to
ghten the main bracket with the help of provided allen key.
 Select the four side brackets, align to 1/4”-20 holes of main bracket as shown below, select
(5mm x 20mm) knobs and ghten to main bracket.
 Aach the side handles to side brackets as shown below. Now aach LCD to the cage with the
help (1/4” x 5/8”) SS Buon Head and ghten the help of provided allen key.

Proaim Handy Director Monitor Cage 4
 For horizontal mounng, rstly remove
the baery plate by loosening the screw
with the help of screw driver.
STEPS FOR HORIZONTAL MOUNTING
Vercal mounng is required when your LCD has le mounng and right mounng).
 Aach the oset bracket to V-Mount baery plate base and select the (1/4” x 3/8”) SS Buon
Head for ghtening the oset bracket.
 Now aach the main bracket to oset bracket and select the (1/4” x 5/8”) SS Buon Head to
ghten the main bracket with the help of provided allen key.
 Slide the baery plate for horizontal mounng from 1 slot to 2 slot.
1
2

Proaim Handy Director Monitor Cage 5
 Aach the side handles to side brackets as shown below. Now aach LCD to the cage with the
help (1/4” x 5/8”) SS Buon Head and ghten the help of provided allen key.
YOUR HANDY DIRECTOR MONITOR CAGE SET UP AND READY TO GO
 Select the four side brackets, align to 1/4”-20 holes of main bracket as shown below, select
(5mm x 20mm) knobs and ghten to main bracket.
VERTICAL MOUNTING HORIZONTAL MOUNTING

Proaim Handy Director Monitor Cage 6
WARRANTY
We oer a limited me warranty for our products. For Mechanical products we provide a 6
month warranty & for electronic products we provide a 3 month warranty from the date of
purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include , by the way of example , damage caused by products that we
donot supply or from mishandling in transit, accident, misuse, neglect, lack of care of the prod-
uct , or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.