PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Airwave V5 Camera Vibraon Isolator Arm (VI-ARWV-5)
Assembly Manual
Airwave V5 Vibraon Isolator Arm
4 x L-Type Allen Keys
(Sizes: 2.5mm,3mm, 4mm & 3x16mm)
Dampener

Isolator Arm Setup
2
 Remove both the bolts of the Airwave V5
Vibraon Isolator Arm with the help of an
Allen Key.
 Both the bolts of the Airwave V5 Vibraon
Isolator Arm have been removed, as shown in
the image.
 Properly aach the dampener to the Airwave
Vibraon Isolator Arm.
 Now insert both bolts into the dampener and
properly ghten with the help of an Allen Key.
 Loosen the clamp knob of the dampener and
open the clamp.
 Mount the dampener on a Rod (Not Included)
and properly ghten the clamp .
Assembling of Dampener

3
 Now mount the gimbal mounng plaorm on
top of the Airwave Isolator Arm by properly
matching the threads.
NOTE: The arm is equipped with a hydraulic
damping support system and shock-absorbing
springs that oer you smooth uid movements .
 Properly ghten both bolts with the help of
an Allen Key.
NOTE: The arm clamps directly onto a 38 to
42mm diameter rod or speed rails with a locking
clamp, and adjustments are made via a knob at
mulple points along the arm's joints to balance
up and down.
 The gimbal mounng plaorm has been
removed, as shown in the image.
 Loosen both bolts from the gimbal mounng
plaorm of the Airwave Isolator Arm using an
Allen Key, and remove the gimbal mounng
plaorm.

4
 Properly aach DJI RS2 Gimbal (Not Included)
to the Isolator Arm.
Airwave V5 Camera Vibraon Isolator Arm Features
NOTE: The valves should always be adjusted
evenly and set idencally. Rebound and
compression of the hydraulic valves should be
set in such a way so that any loose swinging or
vibraon of the arm is eliminated.
Gimabl Setup
 Press the push pin and remove the camera
plate.
 Aach the Camera Plate and Camera (Not
Included) together and properly ghten with
the help of a screwdriver.
NOTE: In order to smoothen Dampening eect,
turn the adjustment knob. If the arm is too so,
turn it towards direcon of H (Hard). If the arm
is rigid turn it towards the direcon of S (So).
Camera Mounng Setup

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM AIRWAVE V5 CAMERA VIBRATION ISOLATOR ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: It has mounng threads to mount
various gimbal or camera mounts, such as the
DJI Ronin 2/S/S2/SC 2, Zhiyun WEEBILL/
CRANE.