PROAIM SR-250-00 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copy-
right statutes or in wring by the Publisher.
Dovetail Camera Shoulder Mount Rig (SR-250-00)
Assembly Manua l
Front Handle Set
Threaded Crossbar Rod Adapter
Shoulder Pad 3/16mm
Allen Key
Dovetail Quick Release Plate

2
 Aach the ARRI standard rosee handles to
the Rosee crossbar and secure them using
the knob as shown in the images.
 Slide the Dovetail Quick Release plate on the
threaded crossbar.
 Adjust the Dovetail Quick Release plate and
secure it correctly with the help of a knob.
 Slide in the shoulder pad to the dovetail quick
release plate as shown in the images.
Shoulder Mount Rig Setup
 Secure it correctly using the locking lever.
 Loosen the side rotaon knobs present on
both sides of the Rosee crossbar, and you
can rotate the handles up to 360°.

3
 Adjust the handles and lock them at the
desired posion using a knob.
 Loosen the height adjustment knobs present
on both handles, and you can adjust the
height up to 50mm.
 Tighten the knob to lock the handles at the
desired height.
 Loosen the lower side rotaon knobs, and
you can rotate the handgrips up to 180°.
 Narrow down or widen the handles as per
your preference.
 Loosen the rotaon knobs present on the
boom of the crossbar to narrow down or
widen the space between the handles.

4
 Loosen the dovetail plate knob for quickly
moving the dovetail plate on the threaded
crossbar.
 You can now adjust the plate at your desired
posion, as shown in the images.
 Push the pin in and remove the Base plate
from the Dovetail plate as shown.
 Loosen the rod adapter’s bolt using an
3/16mm Allen key. Now, aach the rod
adapter to the Base plate.
 Insert the bolt into the Base plate and ghten
it using the 3/16mm Allen key.
 Mount your Camera on the Base plate and
secure the bolt using an Allen key.

5
YOUR PROAIM DOVETAIL CAMERA SHOULDER MOUNT RIG
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Slide the base plate with the Camera
mounted on it on the dovetail plate and press
the Locking lever to secure it.
 Your setup is ready.