protech prox SP-S154 User manual

Ver. Q3
All Rights Reserved. Copyright 2021
SP-S154
SP-S154
Jumper Setting
SP-S154
Quick
Reference
Guide
Specification
System
CPU Support Core™ i7-7700T, Quad Core, 2.9GHz, 8M cache
Core™ i5-7500T, Quad Core, 2.7GHz, 6M cache
Core™ i3-7101TE, Dual Core, 3.4GHz, 3M cache
Celeron®G3930TE, Dual Core, 2.7GHz, 2M cache
Chipset Intel®Q170/H110
Memory Support 2 x DDR4 2133MHz SO-DIMM sockets (up to 32GB)
Storage 2 x 2.5" SATA III HDD/SSD (support RAID 0/1 in Q170 SKU only)
Power Input AC input ATX 250W
Operating System Windows 10 IoT Enterprise (64bit)
Dimensions (W x H x D) 408 x 320 x 97.55mm
System Weight 8.1 kg
Mounting Support Wall mount / VESA 75,100 / Panel mount
Certifications FCC / CE
I/O Ports
Display 2 x DVI-D
USB 4 x USB 3.0 & 4 x USB 2.0
Audio 1 x Line In / 1 x Line Out / 1 x Mic In
LAN 2 x RJ45 ports
LAN1: Intel®PHYI219LM (10/100/1000 Mbps)
LAN2: Intel®LAN 210AT (10/100/1000 Mbps)
Support Wake-On-LAN, PXE
Serial Ports 4 COM ports / COM1 for RS-232/422/485
COM2/COM3/COM4 for RS-232
COM1/COM2/COM4 support +5V / +12V / RI selectable
Expansion Slots 1 x PCIe (x16) / 1x half-sized Mini PCIe
Antenna Hole 2 x antenna holes
Power On/Off 1 x power button switch
1 x 2-pin connector for remote power button
Parallel Port 1 x Parallel Port (SPP/EPP/ECP)
Display
LCD 15” TFT LCD(LED) resolution XGA (4:3) 1024x768
Touchscreen 15” P-CAP touch panel / 15” resistive touch panel
Environment
Operating Temp. HDD: 0°C~45°C (32°F~113°F) / SSD: 0°C~50°C (32°F~122°F)
Storage Temp. -20°C~80°C (-4°F~176°F)
Humidity 20%~90% RH (no condensation)
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly.
Replace batteries only with the same or equivalent type recommended
by the manufacturer. Dispose the used batteries according to the
manufacturer’s instructions.
COM1 RS-485 Auto Flow
Control Selection
(default)
Disable Enable
1
1
Disable
11
(default)
Enable
JP4 Intruder Detect
Selection
AT/ATX Mode
Selection
VCCIO Voltage Selection
0.95V 1.0V
(default)
1
1
AT
ATX (default)
1
1
JP5 BIOS Recovery Mode
Selection
Configure Normal
(default)
1
1
1
Recovery
1
(default)
Enable Disable
1
SPI Override
Protection Selection
AT/ATX Mode Selection
ATX
(default)
1
AT
1
Normal
1
(default)
1
Clear CMOS
JCMOS1 Clear CMOS
Data Selection
11
JRTC1 Clear RTC Data
Selection
Normal
(default)
Clear RTC Data
LAN2 Enable/Disable
Selection
Disable
Enable
(default)
1
1
COM4 Pin9 Voltage
Selection
2
1
12V
2
1
5
6
5V
RI
(default)
2
1
5
6
5
6
COM1 RS-232/422/485
Selection
RS485
RS422
RS232
12
9
10
(default)
2
10
1
9
2
910
1
JRTC1
2
1
12V
2
1
RI
(default)
5
6
COM2 Pin9 Voltage
Selection
5V
2
15
6
5
6
COM1 Pin9 Voltage
Selection
5V
6
2
2
5
1
12V
RI
(default)
12
566
5
2
1
REMOVE
Intel®7th/6th Gen.
Core™ i7/i5/i3
(LGA1151)
AUDIO1
LAN2_USB2
LAN1_USB1 USB1 JD09M1
DVI1
JP_LAN2
JP10
1
1
DP1
2
20
1
19
COM5
COM3
10
1
6
5
10
1
6
5
COM4
COM6 1
6
1
6JP_COM2
JP_COM1
1
56
5JP11
1
JP6
1
SYS_FAN1
15
2
6
JP_COM4
3 4
1 2
12V
GND
12V
GND
ATX_PWR2
ATX_PWR1
1
13
24
12
CPU_FAN1
1
1
JP3
SO-DIMM1
SO-DIMM2
SATA1
SATA2
1
7
7
1
JP1
1
USB2
15
JP12
FP1
JP2
1
M_PCIE1
BAT1
1
21
19
115 51
17
1
1
JP4
JCMOS1
Intel®
H110/Q170
LPT1
JP7
JP5
1
1
2
8
7
1
26
13
14
PCI_E1
JP9
1
9
2
10

All Rights Reserved. Copyright 2017
(Unit: mm)
4. Good Care
• When the outside of the case is stained, remove the stain with a neutral washing agent with a dry cloth.
• Never use strong agents such as benzene and thinner to clean the device.
• If heavy stains are present, moisten a cloth with diluted neutral washing agent or with alcohol and then wipe thoroughly with a dry cloth.
• If dust has been accumulated on the outside, remove it by using a special vacuum cleaner for computers.
• The power cord with the plug shall be connected to a socket-outlet with earthing connections.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
WARNING! Some internal parts of SP-S154 may have high electrical voltage. And therefore we strongly recommend that qualified engineers can open and disassemble the device.
Please handle LCD and Touchscreen with extra care as they are easily breakable.
Safety Precaution
Installing Hooks (optional)
Front View Rear View
Left Side View
Rear I/O View
Wall Mount Cut-out Dimensions
Step 1. Install the mounting brackets into the mounting holes on
the two sides of SP-S154 using 4 x screws (M3x5mm).
Step 2. Mount SP-S154 Panel PC equipped with 4 brackets
onto the wall firmly.
Quick Setup
Top ViewRight Side View
Bottom View
System Overview
Installing Wall Oring (optional)
Step 1. Place the Wall O-ring into
the back of the front bezel.
HDD Easy Maintenance
Step 3. Place the HDD / SSD and
fasten the 4 screws.
Step 1. Release the screw of the
HDD / SSD tray.
408
320
371
360
6.50
100 (VESA)
75 (VESA)
98
110.50
100 (VESA)
42.50
75 (VESA)
55
268
200.85
26
10.20 35
97.55
10
380.6
374
250
80
292.6
272
146
Ø 3.5(TYP.)
USB3.0COM1
DVI-D
USB 2.0
COM2 COM3
COM4
Remote
Switch
LAN1
LAN2
Mic In
Line In
Line Out LPT Power
Button
Wall O-ring
Wall
Step 2. Fasten the 18 screws.
Wall Oring Accessories (optional)
M3x 28mm screw x 18 Washer x 18
Step 2. P ull out the HDD / SSD tray.
Step 5. Fasten the screw of
the HDD / SSD tray.
Step 4. P ush back HDD / SSD tray.
HDD Accessories
M3x4.8mm Screw x 8
HDD Tray Screw
Step 3. Install 4 hooks onto the mounting brackets on the two sides
of Panel PC and fasten the mating screws to secure firmly.
The following messages are reminders for safety on how to protect your panel PC from damages and extend the life cycle of SP-S154.
1. Check the Cable Voltage
• The range of operating voltage should be AC input ATX 250W. Otherwise, the panel PC could be damaged.
2. Environmental Conditions
• Place your SP-S154 on a sturdy, level surface. Be sure to allow enough space to have easy access around the device.
• Avoid extremely hot or cold place to install SP-S154.
• Avoid exposure to sunlight for a long period of time or in an airtight space.
• Avoid the device from any heating device or using SP-S154 when it’s been left outdoors in a cold winter day.
• Avoid moving SP-S154 rapidly from a hot place to a cold place and vice versa because condensation may come from inside of the device.
• Don’t place SP-S154 close to any radio-active device in case of signal interference.
3. Handling
• Avoid putting heavy objects on top of the device.
• If water or other liquid spills into this product, unplug the power cord immediately.
Hook Accessories (optional)
x 4
x 4
M4x35mm screw
Mounting Bracket
Hook
x 4
M3x5mm screw
x 4
M4 Nut
x 4
Installing VESA Mount (optional)
Wall
VESA Mount Accessories (optional)
VESA Mount Kit
VESA Mount (optional)
M4x10mm screw
VESA Mount Screw
x 4
M6x15mm screw
(Round Head with
spring washer screw)
x 4
x 1