protech SP-C155 User manual

Ver. Q1
All Rights Reserved. Copyright 2019
Specifications
SP-C155 / SP-C175
SP-C155 / SP-C175
Jumper Setting
SP-C155/
SP-C175
Quick
Reference
Guide
LCD
Customer (2nd) Display SP-C155: 15” XGA LCD
SP-C175: 17” SXGA LCD
Display Resolution SP-C155: LVDS 1024 x 768 dots XGA
SP-C175: LVDS 1280 x 1024 dots SXGA
Brightness Typ. 450 cd/m2 (SP-C155) / Typ. 350 cd/m2 (SP-C175)
Life time of Backlight lamp Min. 50,000 hours (SP-C155 & SP-C175)
Touch Panel P-CAP or Resistive Touch (USB Interface) or N/A
Dimensions (Panel) SP-C155: 365 x 280 x 54mm (W x H x D)
SP-C175:
Weight SP-C155: 3.5kg
SP-C175: 4.4kg
Viewing Angle Horizontal: -80°~ 80°, Vertical: -80°~ 70°
Wall Mount VESA Mount 100x100 mm
Power Supply DC 12V/3.3A/ 40W Power Adapter
(AC Input: 90 ~264 Vac, 47/63Hz)
I/O Ports
VGA 1 x VGA port
DVI-I 1 x DVI-I port (support DVI-D signals only)
HDMI 1 x HDMI port
USB 1 x USB port (touch connection)
Environment
EMC & Safety CE
Operating Temp. -20°C ~ 60°C (-4°F ~ 140°F)
Storage Temp. -30°C ~ 70°C (-22°F ~ 158°F)
Humidity 5% ~ 95%
1
3
JP2
J9
J11
J12
CN1
CN4
CN2
CN5
13
4
6JP1
J7
1
8
J5
1
232
31
J6
110
1
JP2
PWM / Analog
Selection
Pin
1-2
2-3
Description
PWM
Analog
396 x 328 x 54mm (W x H x D)
JP1
Panel 3.3V / 5V / 12V
Selection
3
4
1
6
Pin
1-6
2-5
3-4
Description
3.3V
5V
12V
3
4
1
6
For SP-C155
For SP-C175

(Unit: mm)
The following messages are reminders for safety on how to protect your LCD monitor from damages and extend the life cycle
of SP-C155 / SP-C175.
1. Check the Cable Voltage
• The range of operating voltage should be DC 12V. Otherwise, the LCD monitor could be damaged.
2. Environmental Conditions
• Place your SP-C155 / SP-C175 on a sturdy, level surface. Be sure to allow enough space to have easy access around the device.
• Avoid extremely hot or cold place to install SP-C155 / SP-C175.
• Avoid exposure to sunlight for a long period of time or in an airtight space.
• Avoid the device from any heating device or using SP-C155 / SP-C175 when it’s been left outdoors in a cold winter day.
• Avoid moving SP-C155 / SP-C175 rapidly from a hot place to a cold place and vice versa because condensation may come from
inside of the device.
3. Handling
• Avoid putting heavy objects on top of the device.
• If water or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
• When the outside of the case is stained, remove the stain with a neutral washing agent with a dry cloth.
• Never use strong agents such as benzene and thinner to clean the device.
• If heavy stains are present, moisten a cloth with diluted neutral washing agent or with alcohol and then wipe thoroughly with a dry cloth.
• If dust has been accumulated on the outside, remove it by using a special made vacuum cleaner for computers.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
WARNING! Some internal parts of SP-C155 / SP-C175 may have high electrical voltage. And therefore we strongly recommend that qualified
engineers can open and disassemble the device. Please handle LCD and Touchscreen with extra care as they are easily breakable.
Safety Precaution
SP-C155 Overview
Installing Hooks
Step 1. Install the mounting brackets into the mounting holes on
the four sides of the LCD monitor using 10 x screws (M3x5mm).
Step 2. Mount the LCD monitor equipped with 10 brackets
onto the wall firmly.
Accessories
Hook
x 10
M3x5mm screw
x 10
Mounting Brackets
x 10
Hook Accessories (option)
VESA Mount Kit x 1
VESA Mount Accessories (option)
Front View
Installing Wall O-ring
Place the Wall O-ring into the groove surrounding the back of the
front bezel.
Step 1.
Install the LCD monitor onto the wall.
Step 2.
Installing VESA Mount
SP-C155
Rear View
Front View Rear View
SP-C175
All Rights Reserved. Copyright 2019
Top View
Bottom View
Side View
Side View Top View
Bottom View
SP-C175 Overview
Wall Mount Cut-Out
Quick Setup
Rear I/O View (SP-C155 & SP-C175)
279.7
365.3
C.L.100(VESA)
C.L.100(VESA)
5.5
53.5
23 25
62.3
142
270.5
MENU VOL- VOL+ SOURCE POWER
357.5
184 86.8
VGA DVI HDMI DC12V USB
(Touch)
395.8
328.2
C.L.100(VESA)
C.L.100(VESA)
5.5
MENU VOL- VOL+ SOURCE POWER
53.5
23 25
52.3142
310.5
387.5
184 101.8
VGA DVI HDMI DC12V USB
(Touch)
Wall 1. Install the hook.
2. Tighten the screw.
M4x35mm screw
x 10
Wall O-ring
Wall
Place the Wall
O-ring into the
groove surrounding
the back of the
front bezel.
1
Install the LCD Monitor
onto the wall.
2
Wall
12V DC In
HDMI DVI-I VGA
USB
(Touch)
VGADVIHDMI
DC12V
(Touch)
USB
Step 3. Install 10 hooks onto the mounting brackets on the four sides of
the LCD Monitor and fasten the mating screws (M4x35mm) to
secure firmly.
R20
Wall
360.5 0.3
273.5 0.3
R20
Wall
313.5 0.2
390.3
0.2