protech prox SP-6558-R User manual

Ver. Q1
All Rights Reserved. Copyright 2021
SP-6558-R / SP-6550-R
SP-6558-R/
SP-6550-R
Quick
Reference
Guide
Specifications
Jumper Setting Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with
the same or equivalent type recommended by the manufacturer. Dispose the used batteries according to the
manufacturer’s instructions.
CAUTION!
SP-6558-R / SP-6550-R
API
CPU Type
System
Intel®Celeron®J3455: 10w, 4C, 2.3GHz
Intel®Celeron®N3350: 6w, 2C, 2.4GHz
Hardware monitor / WatchDog
Storage Support 1 x 2.5” 7mm SATAIII HDD / SSD drive space
Power Supports DC 12V, 19V and 24V power input
Memory Support 1 x DDR3L 1600/1867MHz SO-DIMM socket (up to 8GB)
1 x HDMI1.4a, resolution: up to 4096x2160 @60Hz
Serial Ports
USB / Sound
LAN
USB
Display
GPIO
Power Adaptor Adapter w/ lockable 3-pin terminal block (optional)
Mounting Support Wall Mount / VESA 75 / Panel Mount
Operating System Windows 10 64bit / Ubuntu 17.04 64bit (kernel: 4.4)
Expansion Slots 1 x full-sized mPCIe slot (with PCIe and USB signals)
1x full-sized mSATAslot (with SATA and USB signals)
Dimensions / Weight SP-6558-R: 224.83 x 176.83 x 75.6mm (WxHxD) / 2.5kg
SP-6550-R: 259.63 x 216.03 x 73.2mm (WxHxD) / 3kg
Certificate FCC/CE
I/O Ports (Top side)
Normal SKU: 2 x USB 2.0 (option) / PoE SKU: N/A
COM2: RS-232/422/485 selectable by BIOS(Default: RS-232)
COM3&4: RS-232 w/ RI/5V/12V selectable by jumper (Default: RI)
Normal SKU: COM2~4
PoE SKU: COM3~4 & COM2 or DIO (Default: COM2)
I/O Ports (Bottom side)
4x USB 3.0 / Line Out
2 x GbE LAN (support Wake-on-LAN) / LAN1 & 2: Intel®I210AT
Power Input
Power On / Off
LED
3-pin DC In terminal block (lockable)
1 x Power Button & 1 x Extended Power Switch
1 x Power LED
Environment
Operating Temp. SSD: 0°C~45°C (32°F~113°F) / HDD: 0°C~40°C (32°F~104°F)
20% ~ 90%
Antenna Holes Normal SKU: 4 x antenna holes for reservation
PoE SKU: 2 x antenna holes for reservation
LAN Normal SKU: N/A / PoE SKU: 2 x PoE LAN or 2 x GbE LAN
Storage Temp. -30°C ~60°C (-22°F~140°F)
Normal SKU: 1 (option, independent)
PoE SKU: 1 (option, choose either COM2 or DIO)
Humidity
COM3/4 Pin9 RI/5V/12V
12V
1
2
5
6
RI
(default)
21
2
5
6
5
1
6
2
5V
COM3
COM2
M_PCIE1
Mini PCI-E
COM4
COM1
JFP1
PWR2
mSATA
M_SATA1
AUDIO1
SATA_PWR1
JP_COM4 JP_COM3
VGA1
LAN2 LAN1 HDMI1 USB2 USB1
JI2C1
SO_DIMM1
SW1 JP3
USB3
JP9
LVDS1
JP4
JP7
JBAT1
FAN1 JINV1 SATA1JP_VDD1
JLPC1
JMCU1
JDIO1
JP_USBSW1
USB Power
Source Selection
1
1
S5 USBPWR: OFF
S5 USBPWR: ON
(default)
LVDS Backlight
Control Selection
3.3V
1
5V
1
(default)
1
Normal
Clear CMOS Data
Clear
CMOS
1
(default)
LVDS VCC Voltage
3.3V
1
5V
1
(default)

All Rights Reserved. Copyright 2017
(Unit: mm)
Normal SKU PoE SKU
The following messages are reminders for safety on how to protect your system from damages and extend a long life for the system.
1. Check the Cable Voltage
• The range of operating voltage should be 12V, 19V or 24V DC. Otherwise, the system could be damaged.
2. Environmental Conditions
• Place your SP-6550-R / SP-6558-R on a sturdy, level surface. Be sure to allow enough space to have easy access around the system.
• Avoid extremely hot or cold place to install the system.
• Avoid exposure to sunlight for a long period of time or in an airtight space.
• Avoid the system from any heating device or using SP-6550-R / SP-6558-R when it’s been left outdoors in a cold winter day.
• Bear in mind that the operating ambient temperature is from 0°C ~ 45°C (32°F ~ 113°F) for SSD.
• Avoid moving the system rapidly from a hot place to a cold place and vice versa because condensation may come from insdie of
the system.
• Placing SP-6550-R / SP-6558-R in strong vibrations may cause hard disk failure.
• Don’t place the system close to any radio-active device in case of signal interference.
3. Handling
• Avoid putting heavy objects on top of the system.
• Don not turn the system upside down. This may cuase the floppy drive and hard drive to mal-function.
• If water or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
• When the outside of the case is stained, remove the stain with a neutral washing agent with a dry cloth.
• Never use strong agents such as benzene and thinner to clean the system.
• If heavy stains are present, moisten a cloth with diluted neutral washing agent or with alcohol and then wipe thoroughly with a dry cloth.
• If dust has been accumulated on the outside, remove it by using a special vacuum cleaner for computers.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
WARNING! Some internal parts of the system may have high electrical voltage. And therefore we strongly recommend that qualified engineers
can open and disassemble the system. Please handle LCD and Touchscreen with extra care as they are easily breakable.
System Overview
Quick Setup
Safety Precaution
Front View SP-6558-R Rear View
Bottom I/O View
Wall Mount Cut-out Dimensions
SP-6558-R
SP-6550-R
Side View
SP-6550-R SP-6558-R
224.83 (SP-6558-R)
260.12 (SP-6550-R)
216.52 (SP-6550-R)
176.83 (SP-6558-R)
253
Wall
209.4
R8.5
Wall
168.8
218.2
R9.13
73.2
26.6
5.1
18.58
140.6
204.76
5.88
75.6
29
11.45
5.5
140.6
164.5
6.17
249.6 (SP-6550-R)
217.5
(option)
(option)
COM2COM3
ANT4
ANT3ANT2
ANT1
USB2.0 COM4
DIO
249.6 (SP-6550-R)
217.5
DIO or COM2COM3
PoE
LAN3 LAN4
COM4
Top View
Power
Button
LAN2/
LAN1
USB
Connector
DC IN
(12/24V)
Extended Remote Switch
COM1
Line Out
HDMI
Power LED
LAN2 LAN1 HDMI
COM1
DC IN (12/24V)
Ext. PWR SW
C.L.75 (VESA)
75 (VESA) 50.42
Installing Wall O-ring
Place the Wall O-ring into the groove
surrounding the back of the front bezel.
Wall O-ring
Wall
Install the system onto the wall.
Step 2.
Place the Wall O-ring into the groove surrounding the back of the front bezel.
Step 1.
Installing Hooks
Step 1. Install the mounting brackets into the mounting
holes on the 4 sides of SP-6550-R using 9 x
M3x5mm screws. (Note: It is not necessary to
install mounting brackets on SP-6558-R in this step.)
SP-6550-R / SP-6558-R
Step 2. Mount SP-6550-R Panel PC equipped with
9 mounting brackets onto the wall firmly.
For SP-6558-R, simply mount the Panel PC
onto the wall firmly.
Step 3. For SP-6550-R, install 9 x hooks onto the mounting brackets on the four sides of SP-6550-R
Panel PC and then fasten the mating screws to secure firmly and complete the installation.
For SP-6558-R, install 10 x hooks onto the four sides of SP-6558-R Panel PC and then fasten
the mating screws to secure firmly and complete the installation.
x 9 for SP-6550-R
x 10 for SP-6558-R
Hook
Hook Accessories (option)
x 9 for SP-6550-R
Mounting Brackets
M3x5mm screw
x 9 for SP-6550-R
x 9 for SP-6550-R
x 10 for SP-6558-R
M4x35mm screw
Installing VESA Mount
VESA Mount Accessories
VESA Mount
VESA Mount Kit x 1
Wall
SP-6550-R SP-6550-R / SP-6558-R
SP-6550-R Rear View
C.L.75 (VESA)
75 (VESA) 57.26
1. Install the hook.
2. Tighten the screw.
SP-6550-R
SP-6558-R
1. Install the hook.
2. Tighten the screw.
Install mounting brackets
onto the 4 sides of the Panel PC.
Wall
Note: This step is for SP-6550-R only.
SP-6550-R
Wall
SP-6550-R
Wall
SP-6558-R