quadient IS-460 User manual

User Guide
IS-460
Franking machine

Table of Contents
1 Read this First 1
1.1 What you will find in this Manual ...............................................3
1.2 Safety Requirements.................................................................5
2Meet Your Mailing System 11
2.1 System Layout.........................................................................13
2.2 Accessories .............................................................................16
2.3 Control Panel Features ...........................................................17
2.4 Connections ............................................................................20
2.5 Power Management ................................................................24
3Processing Mail 27
3.1 Choosing a Type of Stamp......................................................29
3.2 Preparing and Starting your Work Session.............................31
3.3 Processing [Standard] Mail .....................................................39
3.4 Printing [PPI] Mail....................................................................52
3.5 Printing [Received] for Incoming Mail......................................59
3.6 Running [No Printing] Mail.......................................................62
3.7 Settings Details .......................................................................64
3.8 Advanced Operations..............................................................79
4Money Operations 81
4.1 Overview .................................................................................83
4.2 Managing Credit ......................................................................84
4.3 Unlocking the PSD (Postal Inspection) .................................87
5Managing Accounts and Assigning Rights 89
5.1 Accounting and Assigning Rights Overview ...........................91
5.2 Selecting an 'Account Mode'...................................................93
5.3 Guidelines to Setup an Account..............................................94
5.4 Selecting an 'Account Mode'...................................................99
5.5 Managing Accounts...............................................................100
5.6 Managing Operators..............................................................112
5.7 Advanced Reporting Functions.............................................117
6Reports 121
6.1 Reports Overview..................................................................123
6.2 Generating a Report..............................................................126
6.3 Counter Data .........................................................................127
6.4 Postage Data.........................................................................129
6.5 Credit Data ............................................................................132
6.6 Account Data.........................................................................134
6.7 System Data..........................................................................140
6.8 Advanced Reporting Reports................................................145
DELTA3_UK.book Page 1 Lundi, 29. octobre 2012 6:29 18

7Online Services 149
7.1 Online Services Overview..................................................... 151
7.2 Connecting to Online Services ............................................. 152
7.3 Uploading Statistics .............................................................. 155
7.4 System Online Services........................................................ 156
8Configuring your Mailing System 157
8.1 Settings Overview................................................................. 159
8.2 Logging in / out as the Supervisor ........................................ 160
8.3 Changing the Display Language .......................................... 162
8.4 Enabling/Disabling Sounds................................................... 163
8.5 Display Settings .................................................................... 164
8.6 System Time-outs and Settings........................................... 165
8.7 High Value, Low Credit Warnings and PIN Codes ............... 167
8.8 Weighing Settings................................................................. 169
8.9 Postage Imprint Default Settings .......................................... 177
8.10 Imprint Memories .................................................................. 182
8.11 Default Sealing Mode ........................................................... 185
8.12 Connection Settings.............................................................. 186
8.13 Time and Date Management ................................................ 188
9Options and Updates 189
9.1 Options and Updates Process.............................................. 191
9.2 Using the Mailbox ................................................................. 192
9.3 Managing Options................................................................. 194
9.4 Managing Slogan.................................................................. 196
9.5 Managing ERAs.................................................................... 198
9.6 Managing Postal Rates......................................................... 200
9.7 Managing Prepaid Imprints (PPI).......................................... 202
9.8 Updating System Software ................................................... 204
10 Maintaining your Mailing System 207
10.1 Maintaining the Ink Cartridge................................................ 209
10.2 Filling and Adjusting the Feeder Sealer................................ 216
10.3 Cleaning the Mail Path.......................................................... 217
10.4 Maintenance Processes ....................................................... 220
11 Troubleshooting 221
11.1 Paper Jamming..................................................................... 223
11.2 Label Jamming..................................................................... 227
11.3 Weighing Problems............................................................... 228
11.4 Diagnostics and System Data .............................................. 229
12 Specifications 233
12.1 Mail Specifications ................................................................ 235
12.2 Recommended Operating Conditions .................................. 237
12.3 General Specifications.......................................................... 238
12.4 Operating Specifications....................................................... 239
Index 241
DELTA3_UK.book Page 2 Lundi, 29. octobre 2012 6:29 18

Read this First
This section contains important information about safety precautions and environ-
mental recommendations to operate your equipment in the best possible conditions.
1.1 What you will find in this Manual ..........................................3
1.2 Safety Requirements ..............................................................5
How to Disconnect your Mailing System........................................................................... 9
1 Read this First
DELTA3_UK.book Page 1 Lundi, 29. octobre 2012 6:29 18

Read this First
2
1
DELTA3_UK.book Page 2 Lundi, 29. octobre 2012 6:29 18

Read this First
3
1
What you will find in this M anual
1.1 What you will find in this Manual
Section 1: Read this First
Make sure your have read and fully understood the safety requirements in
this section. This section also includes a list of acronyms and symbols used
in the manual.
Section 2: Meet Your Mailing System
System features, reference descriptions of elements and controls, mail for-
mat and how to power your Mailing System off.
Section 3: Processing Mail
Processing mail using the mailing system: choosing a type of task, weighing,
selecting a rate, sealing your mail, running batches, etc.
Section 4: Money Operations
Loading postage credit.
Section 5: Managing Accounts and Assigning Rights
How you can change accounts as a user, or set up accounts and control
access to the Mailing System as the supervisor.
Section 6: Reports
How you can generate and print out reports for the Mailing System usage,
credit usage, account usage, etc.
Section 7: Online Services
Using your Mailing System to access Online Services and connect your sys-
tem for upgrades.
Section 8: Configuring your Mailing System
All the specifications of your Mailing System you can set up as a user (tem-
porary settings) or supervisor (default settings).
Section 9: Options and Updates
How to update/upgrade your system and the stamp elements (ERAs, slo-
gans...).
Section 10: Maintaining your Mailing System
Changing the ink cartridge and maintaining other system components.
Section 11: Troubleshooting
What to do when a problem occurs: jamming, bad sealing, poor printing etc.
Section 12: Specifications
Detailed specifications of your Mailing System.
DELTA3_UK.book Page 3 Lundi, 29. octobre 2012 6:29 18

Read this First
4
1
Symbols
This manual uses the symbols listed below.
Glossary
This manual uses the acronyms listed below.
This symbol... Indicates...
WARNING: indicates a human safety hazard.
ATTENTION: brings to your attention a risk for equipment or
mail that could result from an action you may perform.
NOTE: remark that explains different scenarios or situations.
TIP: advice to help save you time when processing your mail.
SUPERVISOR: indicates that you have to log in as the supervi-
sor (using the supervisor PIN) to perform the procedure. Post-
age functions of the Mailing System are not accessible in this
mode.
Acronym Description
ALD Automatic Label Dispenser
Credit Postage amount available
ERA External Return Address
ID IDentification
LAN Local Area Network: link between computers
MAS Mail Accounting Software: allows you to remotely manage mailing
accounts and associated reports.
MSF Mixed-Size Feeder
PC Personal Computer
PIN Personal Identification Number
PSD Postal Security Device (Meter)
WP Weighing Platform
DELTA3_UK.book Page 4 Lundi, 29. octobre 2012 6:29 18

Read this First
5
1
Safety Requireme nts
Power Connection
Before connection, check whether the Mailing System is suitable for the local AC
power voltage; refer to the type plates at the back of each system component.
•Use an outlet located near the system that is easily accessible. As the power
supply cord is the system disconnecting device, do not route the power cord
between pieces of furniture or over sharp edges.
•Avoid using outlets controlled by wall switches or shared by other equipment.
•Make sure there is no strain on the power supply cord.
1.2 Safety Requirements
THIS SYSTEM MUST BE GROUNDED
•Only connect the power plug to an outlet provided with a pro-
tective ground contact.
•To reduce the risk of fire, use only the power cord supplied with
the Mailing System.
•Do not use ground adaptors.
•Do not use this product on a wet floor or near water.
•In case of liquid spillage, disconnect the power cord from the
outlet and proceed with cleaning.
DELTA3_UK.book Page 5 Lundi, 29. octobre 2012 6:29 18

Read this First
6
1
Compliance
Energy Star compliance
Your mailing machine is Energy Star compliant: it helps you to save energy and
money while protecting the environment.
Environmental compliance
A program is implemented for the recycling of worn mailing machines and machines
at the end of their lifetime. Contribute in a responsible way to the environmental pro-
tection by consulting your retailer internet site, or by contacting him. He will inform you
of the collection and treatment processes of these machines.
CE compliance
Products presented in this guide are conform to requirements of directives number
73/23/CEE and 89/336/CEE.
This is a class A product. Operation of this equipment in a resi-
dential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
DELTA3_UK.book Page 6 Lundi, 29. octobre 2012 6:29 18

Read this First
7
1
General Safety
•Before using your Mailing System, thoroughly read the operating instructions.
•To reduce the risk of fire, electric shock and injury to persons, follow normal and
basic safety precautions for office equipment when using your Mailing System.
•To avoid damage, only use approved supplies (ink, tape, cleaners...).
Follow the additional safety precautions below:
•Do not place lit candles, cigarettes, cigars, etc. on the Mailing System.
•When removing jammed material, avoid using too much force to prevent personal
injury and damaging components.
•When lifting covers, wait for all parts to stop moving before placing hands near the
feeder path or printhead.
•To prevent overheating do not block the ventilation openings or try to stop the
power supply fans.
•Do not remove bolted covers as they enclose potentially hazardous parts that
should only be accessed by a Service Representative.
The Mailing System contains moving parts. Keep fingers, long
hair, jewellery, neck ties, loose clothing away from the mail path at
all times.
DELTA3_UK.book Page 7 Lundi, 29. octobre 2012 6:29 18

Read this First
8
1
Telephone and LAN Connections
Your Mailing System uses the telephone network to connect to the Postal Services
and to your customer online services.
You may also use a LAN (high speed internet connection) to connect to your
customer Online Services and to a mail accounting software (MAS), located on a
separate PC.
Analog phone (4 wires)
Network/PC LAN (8 wires)
Follow the additional precautions below:
•Avoid using your system during an electrical storm; as there may be a risk of elec-
trical shock from lightning.
•Do not install telephone jacks or LAN connectors in a wet location.
•Disconnect the telephone or LAN cable from the wall before moving your system.
To prevent damage to equipment, do not confuse telephone jacks
that connect to the modem and LAN connectors that are bigger:
To reduce the risk of fire, only connect the modem to the tele-
phone line using the supplied cable (see Specifications p.233).
DELTA3_UK.book Page 8 Lundi, 29. octobre 2012 6:29 18

Read this First
9
1
Disconnecting your Mailing System
How to Disconnect your Mailing System
How to
Disconnect your
Mailing System
1First switch your Mailing System to OFF mode (see How to
Turn the Mailing System to OFF Mode
p.25).
2Unplug the power cord from the wall outlet.
3Unplug the LAN cable and the telephone cord from their
sockets as they may still be energized.
Only unplug the power cord when the Mailing System is in OFF
mode or Sleep mode to avoid keeping the ink cartridge in an
unprotected position where the ink may dry out and become
unusable.
DELTA3_UK.book Page 9 Lundi, 29. octobre 2012 6:29 18

Read this First
10
1
DELTA3_UK.book Page 10 Lundi, 29. octobre 2012 6:29 18

Meet Your M ailing Syste m
Get to know your Mailing System in this section.
2.1 System Layout ...................................................................... 13
2.2 Accessories........................................................................... 16
2.3 Control Panel Features..........................................................17
2.4 Connections..........................................................................20
2.5 Power Management ............................................................24
How to Turn the Mailing System to Sleep Mode............................................................. 24
How to Turn the Mailing System to OFF Mode............................................................... 25
2 Meet Your Mailing
System
DELTA3_UK.book Page 11 Lundi, 29. octobre 2012 6:29 18

Meet Your Mailing System
12
2
DELTA3_UK.book Page 12 Lundi, 29. octobre 2012 6:29 18

Meet Your Mailing System
13
2
System Layout
Mailing System with dynamic scale:
2.1 System Layout
Dynamic Scale Automatically measures the weight and dimensions of
mail pieces to dynamically change postage after feed-
ing.
Base Prints envelopes (or labels) and controls the Mailing
System.
Control Panel Allows you to control the Mailing System.
Catch Tray Receives mail pieces after processing.
Weighing Platform Measures weight of mail pieces.
Mixed-Size Feeder Automatically feeds the system with envelopes of dif-
ferent sizes.
Hopper Beginning of mail transport path.
DELTA3_UK.book Page 13 Lundi, 29. octobre 2012 6:29 18

Meet Your Mailing System
14
2
Mailing System without dynamic scale:
Rear Guide-Wall Guides envelopes into the feeder.
Sealer Bottle Provides water to seal envelopes (optional).
Auto Label Dispenser Contains labels to be printed.
User Guide Receptacle Stores this User Guide.
Label Storage Use this slot to store labels horizontally.
Jam Release Handle Allows you to remove jammed envelopes or labels.
Mixed-Size Feeder Automatically feeds the system with envelopes of dif-
ferent sizes.
Side Guide Holds large envelopes in place for feeding.
DELTA3_UK.book Page 14 Lundi, 29. octobre 2012 6:29 18

Meet Your Mailing System
15
2
Inside the system base
Sealer Bottle (if
installed)
Automatically seals mail when the function is acti-
vated.
Cover Lift by front side to open.
Ink Cartridge Prints the postal imprint on envelopes.
Postal Security Device
(PSD)
Postage meter. Stores postage credit and tracks post-
age usage.
DELTA3_UK.book Page 15 Lundi, 29. octobre 2012 6:29 18

Meet Your Mailing System
16
2
Accessories
Report Printer (option)
A USB printer can be directly connected to the mailing system for printing mailing-
related reports.
Barcode Scanner (option)
This scanner is used:
•to identify accounts through barcodes
•to scan tracking numbers on mails and send them to postal server
2.2 Accessories
For more information about compatible printers that can connect
to your mailing system, please contact technical support.
DELTA3_UK.book Page 16 Lundi, 29. octobre 2012 6:29 18

Meet Your Mailing System
17
2
Control Pa nel Features
Display Areas
2.3 Control Panel Features
See control panel and screen layout on the flap of the manual
cover.
Account Displays account currently selected.
Slogan Indicates that a slogan will be printed.
Date Displays the date that will be printed.
ERA Indicates that an ERA will be printed when present.
Job memory Displays selected job memory when applicable.
Item Counter Counts the envelopes or labels printed since the last
counter reset.
Label Indicator When displayed, indicates that the Mailing System will
print a label.
Mailbox Indicates unread messages in message box.
Postage Indicates the amount to be printed on the envelope.
Print Offset Indicates the printing offset status (stamp position shift-
ing for thick envelopes).
Rate and Services Indicates the current rate and services selected.
Remaining credit Displays credit available for postage.
Reset item counter Resets the item counter to zero. This is the starting
point for batch data reports.
Sealing Indicates the sealer state.
Type of stamp Current type of stamp. Use Stamp configuration short-
cut to change.
Weighing Mode Current weighing method.
Weight Current weight used to calculate postage amount.
DELTA3_UK.book Page 17 Lundi, 29. octobre 2012 6:29 18