RAB EZPAN HE 1X4 User manual
INSTRUCTIONS
EZPAN® HE INSTALLATION
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
rmly. Apply weatherproof silicone sealant around the edge of the ceiling mounting box and/or junction box. This is
especially important with an uneven ceiling surface. Silicone all plugs and unused conduit entries.
INDOOR RECESSED CEILING
Grid Clips (up and out as shown)
Fig. 1.
Rotate and slide the Fixture
Tee-Grid Bar
Fig. 2. Secure the Fixture to the Tee-Grid Bar.
FixtureSupport Wires (supplied by
others) through the Grid Clip HoleFig. 3.
Splice Box and Access
Plate
Loosen Access Plate Screw and remove the Access Plate.
Conduit Knockouts on the Access Plate
Fig. 4.
Splice Box
WARNING: To prevent wiring damage or
abrasion, do not expose wiring to edges of sheet metal or other
sharp objects.
7. Access Plate and tighten Access Plate Screw.
EZPAN HE 1X4 EZPAN HE 2X2 EZPAN HE 2X4
Access Plate Conduit
Knockouts
Fixture
Grid Clip
Tee-Grid
Bar
Access
Plate Screw
Splice Box
Grid Clip
Hole
Grid
Clip
Power
Feed
Fixture Grid
Clips
Support Wire
(supplied by others)
1.6”
INSTRUCTIONS
EZPAN® HE INSTALLATION
(Fig. 5).
LINE
COMMON
GROUND GROUND.
(or gray)
NOTE: Do not connect DIM V+ (purple)/ DIM V- (pink/gray) to line
voltage
PINK (or GRAY)
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE BLACK
WHITE
PURPLE
CAUTION: Be sure xture temperature is cool enough to
touch. Do not clean or maintain while xture is energized.
WARNING:
WARNING:
insulated ceilings and non-insulated ceilings.
WARNING:
WARNING:
WARNING:
Note: These instructions do not cover all details or variations in equipment nor
do they provide for every possible situation during installation, operation or
maintenance.
INSTRUCTIONS
EZPAN® HE INSTALLATION
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty
OPERATION
CAUTION: FOR BATTERY BACKUP FIXTURE.
in BATTERY.
BATTERY
(Fig. 6)
NOTE:
CAUTION:
UNSWITCHED HOT HOT AC
UNSWITCHED circuit, connect UNSWITCHED and
SWITCHED lines together.
SWITCHED circuit, connect SWITCHED HOT
(or gray)
DIMDIM
GROUND
7.
connect the BATTERY.
charging.
9.
illuminated, indicating that the BATTERY
(internal battery)
automatically returns to charging mode.
LIGHT
FIXTURE
INSIDE FIXTURE
BATTERY
Pink (or Gray)/DIM–
Black/Switched Line
Green/Ground
White/Neutral
Black/Unswitched Line
Purple/DIM+
BACKUP
DRIVER
BATTERY
CONNECTOR:
CONNECT
ONLY AFTER
AC SUPPLY
POWER IS
CONNECTED
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - sales@rablighting.com
Free Lighting Layouts
Answered online or by request
© 2022 RAB LIGHTING Inc.
73613-RAB
EZPAN HE - IN - 0522
Battery Backup Setting
PRODUCT WATTAGE DIP SWITCH
POSITION (12W)
EZPANHE 1X4 12
EZPANHE 1X4 23, 30
EZPANHE 2X2 12
EZPANHE 2X2 23, 30
EZPANHE 2X4 23, 30, 46
1 = O
2 = On
This manual suits for next models
2
Other RAB Lighting Equipment manuals
RAB
RAB Lightcloud Controller Mini User manual
RAB
RAB T8 User manual
RAB
RAB X17 XFU 60W User manual
RAB
RAB DRI-21-EMGR-DC-D10 User manual
RAB
RAB GOTCHA PLUS GT500 User manual
RAB
RAB EXIT34-RG User manual
RAB
RAB SMSLES2X13 User manual
RAB
RAB STL110H/L User manual
RAB
RAB SWISHFA -2X2 User manual
RAB
RAB HAZL34-40 User manual
