RASOR DD120RC User manual

USE MANUAL English
CUTTINGUNIT
MOD.DD120RC
ED.1-09/14
SERIALNUMBER

EN
2
COMPANY
ACKNOLEDGEMENT
DearCustomer,
thankyouforchoosingaRasor®ElettromeccanicaS.r.l.product.
Rasor®hasbeenareferencepointinthefieldofcuttingsystemsinthetextile,clothing,
furniture,tailoring,sport,chemical,automotive,nauticalandinsulatingmaterialsectorsfor
years.Itsproductionhasbeenalwayssynonymouswithreliabilityattestedbymanyof
satisfiedcustomers.
Rasor®qualitysystem supervisesall thecompanyactivities in orderto providetheCustomer
withaservicethatmeets its needsandexpectations intermsof productquality,delivery
reliabilityandstock of finishedproducts.
Allthepartsofthedeviceshavebeenplannedandproducedto guaranteeanoptimum
performance.InordertokeepthehighqualitylevelandthelongreliabiltyoftheRasor®
products,itisrecommendedusingonlyoriginalsparepartsandtocontacttheheadoffice
foranymaintenancework.
Rasor®ElettromeccanicaS.r.l.wasestablishedinMilanin1946 byLuigiSpinelli.Formore
thansixtyyearsithasbeenproducingautomaticcuttingsystems,cuttingunits fortextile
applications andelectricandpneumaticcutters.
Initiallyconsideredasapointof referenceforcuttingsystemsinthe
textileapplications,theRasor®products arenowadayswidelyusedin
otherfields:chemical,automotive,nauticalandsportsectorsandin
furnituremanufacturing.
Rasor®canrelyontheprofessionalcontinuityof three generations,
thanksto theprecious supportof thepromotingpartner,to hispassion,dedicationandgreat
experienceof seventyyears.
Themaincharacteristicof Rasor®isthateachworkingphase,startingfromthemanufacturing
of theproductupto its packinganddeliveryiscarriedoutinRasor®premisesbyqualified
operatorswhohaveprofessionalygrownupfollowingthespiritof thecompanyandof its
founders.ThisensuresthehighqualitywhichRasor® hasalwaysconsideredasessentialsince
thebeginningof its activity.
Followingtheinnovativespiritmentionedabove,ourcompanyisconstantlyfocusedonthe
improvementof theproductquality,onthestudyanddevelopmentof newmaterialsand
technologies.

EN
3
1.GENERALSAFETY RULES
Thismanualis an integralpartofcuttingunitDD120RCandmustbecarefully
readbeforeusingitsinceitgivesimportantindicationswithregards toits safe
installation,useandmaintenance.Keepitwith care.
BeforeusingcuttingunitDD120RC,readcarefullythefollowinggeneralsafety
rules.
•PACKAGING.
Aftertakingoffthepackagingmakesurethatthecuttingunitisintact.In case
ofdoubtdonot useitandcontactan authorizedservicecentre.Donotleave
piecesofpackaging(plasticbags,foampolystyrene,boxes,etc.)withinthe
reachof childrenordisabledpersonssincetheyarepotentialsourcesofdanger.
•AVOIDDANGEROUSENVIRONMENTS.
PreventthecuttingunitDD120RCcomponents fromcomingincontactwith
damporwetsurfaces.
•KEEPCHILDRENAWAY.
Unauthorizedpersons,inparticularchildren,mustbekeptawayfromtheworking
area.
•FEEDCABLE.
Preventthefeedcablefromcomingincontactwithhotobjects,pointedsurfaces
orsharpedges.Neverpullthefeedcableofthemachine.It mustneverbe
replacedbytheuser.Ifnecessarycontactprofessionallyqualifiedstaff.
•KEEPTHE WORKINGAREAALWAYSINORDER.
Theworkplacemustalwaysbekeptinorderandwell lightened;liquidsoroil
tracesmustnotbepresent.
•ALWAYSUSECUTTINGUNITSDD120RCPROPERLY.
Usethecuttingunitsonlyto carryouttheworkstheyhavebeen designedfor;
donotusethemimproperly.
•OBSERVETHEUSEOFTHE TOOLS.
Donotcutexcessivelythickmaterialsandalwayscheckbladeconditions.
•AVOIDACCIDENTALSTARTINGS.
BeforeconnectingcuttingunitDD120RC,makesurethateverythingisinstalled
properly.
•CLOTHING.
Donotuselargeclothesoraccessoriesthatmightgetstuck inthemoving
parts.
•GOGGLESANDPROTECTIVEMETALMESHGLOVES.
Always usegoggles,protectivemetalmesh glovesapprovedbyRasor®during
useandmaintenanceoperations(accordingtoUNIEN388:2004standard).
•SPAREPARTS.
Duringmaintenanceandreplacementoperations useonlyoriginalspareparts.
Blademaintenancemust beonlyperformedbyRasor®technicians.
•INSTALLATION.
Anyinstallationthatisnot inconformitywiththesespecifications couldjeopardize
yoursafetyandcancelsthewarranty.

EN
4
ALLRIGHTSARERESERVEDACCORDINGTOTHE
INTERNATIONALCOPYRIGHTCONVENTIONS,
Thereproductionof anypartof thismanual, inanyform,isforbiddenwithoutthe
priorwrittenauthorizationof Rasor®ElettromeccanicaS.r.l.
Thecontentof thisguidecanbemodifiedwithoutpriornotice.Greatcarehas
beentakenincollectingandcheckingthedocumentationcontainedinthis
manualto makeitas completeandcomprehensibleaspossible.
Nothingcontainedinthismanualcanbeconsideredasawarranty,either
expressedorimplied-including,not inarestrictiveway,thesuitabilitywarranty
foranyspecialpurpose.Nothingcontainedinthismanualcanbeinterpretedasa
modificationorconfirmationof thetermsof anypurchasecontract.
Rasor®ElettromeccanicaS.r.l.machineshavenot beenconceivedtoworkinareasatriskof
explosions andathigh riskof fireandtheycannotcutwetordampmaterials.Moreover,they
cannotworkincaseofrain.
Incaseof damageormalfunction,cuttingunitDD120RCmustnotbeuseduntil theCustomer
CareTechnicalServicehasrepairedthem.
Theoriginalconfigurationof thecuttingunitmustnot bechangedatall.
Onreceivingthemachinemakesurethesupplycorrespondstowhathasbeenordered.
Incaseofnon-complianceimmediatelyinformRasor®.
Alsomakesurethecuttingunithasnotbeendamagedduringtransport.
CustomerCareTechnicalService
WARNING
Theinstallerandthemaintenancemanmustknowthecontentof thismanual.Although
themainfeaturesof themachinedescribedinthismanualarenot subjecttochange,
Rasor®ElettromeccanicaS.r.l.reservestherightto modifythecomponents,details
andaccessoriesitdeemsnecessaryto improvethemachineorto meetmanufacturingor
commercialrequirements atanytimeandwithoutbeingobligedto updatethismanual
immediately.
Informativeletter
Foranyinformation,pleasecontact
® ELETTROMECCANICA S.r.l.
ViaV.Caldesi,6;20161,MILANO(MI)-ITALY
Tel:[phone];Fax:[phone]
e-mail: [e-mail]
web: www.rasor-cutters.com
WARNING
RASOR

EN
5
2.TRANSPORTAND PACKING
Thecuttingunitisdeliveredinasuitcase,insidewhich therearevarious options.Thecodeof
theorderedproductandits serialnumberareindicatedoutsidethepackage(see picture1).
Thefollowingaccessoriesarecontainedinabaginsidethepackage:
1) Circularblade;
2) Butterflywrenchforbladenutdisassembly.
3.PLATE DATA
Themanufacturer'sidentificationandECSTANDARD2006/42/ECconformityplate(see picture
below) islocatedonthefrontpartof thecuttingunit.
Theplate mustnotbe removedatall,evenifthemachineisresold.Alwaysreferto
theserialnumberwrittenontheplateitselfwhencontactingthemanufacturer.
Severalsafetywarningsareprintedonacardwhichisappliedto thecuttingunitfeeding
cable;suchwarningsmust bestrictlyfollowedbyeveryonedealingwiththemachine. The
companyisnottobeheldresponsiblefordamagetopropertyoraccidentsto
peoplewhich might occur iftheabove-mentionedwarnings arenotobserved.In
such acase,theoperatoristheonlypersonresponsible.
READ
THE
INSTRUCTION
MANUAL
DONOT
REMOVE
THE
SAFETY
DEVICES
HIGH
VOLTAGE
SHEARING
RISK
USE
METAL
GLOVES
USE
GOGGLES
1
Serialnumber
Yearofproduction
Model
Electricdata
2
2
180
DD
0,52
2600 2___
DD120RC
380/400-3ph
1

EN
6
4. PRODUCTDESCRIPTION
ThefixturedescribedinthismanualisacuttingunitmodelDD120RC whichcanbeassembled
onautomaticmachines(e.g.spreaders,computerizedcutting) bymeans of properholes
locatedin themotorrest.
DD120RC canoperatecontinuouslyatveryhighspeedsanditcancutatvarious heights by
means of multipleinstallation.
Thankstotheslidingfootandto thesteelupperqualityof thebladesupplied,DD120RC is
suitablefortextileapplications,especiallyfornaturalfibres,mattressesandsponges,during
productionprocess.Thethree-phasemotor,withextremelycompactdimensions andextreme
reliabilitywith120 mmdiameterblades,guarantees cutswiththicknessupto 50mm,also
formultiplelayers.
Asharpenerassembledonthecuttingunitheadallowswhettingthebladeatanymoment
withoutdisassemblingit.Aftercarryingoutthisoperation,itispossibleto startcuttingagain.
Ahighpowermotor,perfectlybalanced,withahighnumberof revolutions andtotallyfree of
maintenance,reducesthevibrations to theminimum,thus makingthecuttingunitcomply
withEuropeanDirectiveNo.2002/44/ECconcerningtherisksderivingfrommechanical
vibrations.Themechanicalparts aremadeof highresistancesteel, bronzeandaluminium.
1
4
14
2
6
10
8
9
11
3
7
5
13
12
1Connectorblock 8 Circularblade
2Motorframe 9 Slidingfoot
3Feedcable 10 Aluminiumbasecoveredwith
Teflon
â
4Motorcover 11 Leftaluminiumprotectioncover
5Sharpeningbutton 12
Adjustingknobforleft
protectioncover
6Adjustingknobforright
protectioncover 13 Motorrest
7Rightaluminiumprotection
cover 14 Cablegland
Devicecomponents

EN
7
7.FIELDOFAPPLICATION
6.NOISE LEVEL
NOTE
It isadvisableforcuttingunitDD120RC ownersto verifythecompliancewiththestandard
concerningsafetyof workers:Italianlegislativedecree 81/08.
Themaximum acousticpressurelevelemittedbycuttingunitDD120RC isabout60 dB(A).
Noisetests havebeen carriedoutin compliancewith StandardUNIENISO11202:2010. The
devicenoiselevels,measuredatdifferentdistances(withoutanysoundwavefilteringsystem),
varyintheextentof fewdb (A).
CuttingunitDD120RC hasbeendesigned,manufacturedandassembledto cutanykindof
fabricsormaterials,withtheexceptionof metal,plasticorwood,bymeans of rotarycircular
blades.Thisequipmentmust not work:
-in areas proneto explosions;
-in presenceof finedustorcorrosivegases;
-on wetordampmaterials;
- tocutplastic,metalandwoodenmaterials.
Itisforbiddentousecuttingunit DD120RCfor purposesdifferentfromtheabove-
mentionedones.
5.TECHNICALFEATURES
Thetechnicaldataareonlyindicativeandtheycanbechangedwithoutnotice.
120 mm
2600 rev./min
ca.50 mm
Three-phase-Asynchronous,180 W
(IP65-CLF)
0,52A
4000 g
5700 g
1,5mt
LUX200
<2,5m/s2
0~55°C
10 ~95%without condensate
Cuttingworkingdepth
Motorpower
Weight(withfeedingcable)
DD120RC cuttingunitfeatures
Blade diameter
Blade speed
Max.absorption
Workingtemperature
Workinghumidity
Weight(withpackage)
Electriccablelength
Minimumlightfor working
operations
Vibrationatthestartup
CircularbladeØ120mm,inExtrasteel
Featuresoftheavailableblades
12CSW

EN
8
8.USE WARNINGS
Werecommendfollowingtheindications belowin ordertoalwaysworkinsafetyconditions.
·Alltheoperationsmustbecarriedoutcomplyingstrictlywiththesafetyrulesofthe
countrywherethedeviceistobeinstalled.
·ItisSTRICTLYFORBIDDENtosmokeduringtheinstallationoradjustmentoperationsof
thecuttingunit.
·TheCustomerundertakestocomplywithandmakehisstaffobserveall therulesand
regulationsinforceconcerningsafety,preventionof accidentsandhealthinthework
place.
Therefore,theCustomerassumestheresponsibilitytostrictlyfollowalltherulesand
regulations inforce,aswell asthespecialprovisions inforceinsportandpublic
installationstheCustomerdeclarestoknowafterreceivingalltherelativenecessary
information.
·Thecuttingunitworksalsowithoutitssafetyprotectivedevice.This
protectivedevicemustNEVERberemoved.
·Alwayschecktheresistanceofthematerialto becutandthekindofbladewhichis
beingused.
·TheCustomershallequiphisownpersonnelwithalltheindividualsafetyprotections
fortheexecutionoftheworks,as wellaswiththeoneswhich mightbeprescribedby
theManufacturerduetospecificdangerconditionsoftheplantoroftheareawherethe
personnelmustwork.
·Donotmakeanyadjustmentwhilethebladeisworkingorwhiletheelectricplugis
connected.
·Alwayspayattentionto theelectriccablepositionto preventitfrombeingcutor
damagedbytheblade.
·ItisallowedtoassemblecuttingunitDD120RConmachinesO.E.M.onconditionthat
theiroriginalstructureisnotmodified.Otherwise,theinterventionmustbecertifiedby
Rasor®.
Firstlymakesurethatthelinesareabletofeedthecuttingunitcorrecltly,incompliancewith
thesafetyrules(forthefeaturerequiredseepar.5).
Wesuggestinstallingamagnetothermicsafetydevicebeforethecuttingunitandcheckthat
thegroundcircuitiseffective.
Beforeworkingonthefeedingcablepulltheplugout.Checkthatelectricconnectionsand
protectionscorrespondtothedrivingforceandtheplatedatavalues (voltageandcurrent),
requiredbythedifferentelectriccircuits.
ByreferringtotheCEI 11-27/1standardalltheworkscarriedoutbymeansofelectriccurrent
mustbeperformedbyastaff,whohasbeenprovidedwithallthedevicesrequiredbythe
above-mentionedstandard.
Fortheworkscarriedoutundervoltage,itisnecessarythattheemployercertifiesthesuitability,
againstformativeprocesses.Thecuttingunit DD120RCissuppliedwithelectriccable
connectedtotheconnectorblocklocated besidethemotor.
Theusermustconnectthecuttingunittothemains (thecable complies withtheCEI 20-22
III Standard). Neverchangethelengthofthecablesupplied.Ifitisnecessary,usealonger
cableandreplacetheonesupplied.
WARNING
9.ELECTRICCONNECTION

EN
9
10. RESIDUALRISKS
Eventhoughthecuttingunitissafe,operatorsmust payattentionto preservetheirandother
people’ssafety.
LAttheendof theworkingoperations,themetalparts couldbeveryhot.
LThecuttingbladecanworkevenwhentheprotectivedeviceisdisassembled.
3
B
A
WARNING
Theoperatormust arrangeadisconnettingswitchonthesupplylineinorderto switchoff the
machine,ifnecessary.
B B
Toconnectthenewcableopenthecover“A”byunscrewingthe
4cross-slottedscrews“B”(seepicture3).Connectthephase
cableto theterminalboard.Theminimum sectionofthe
connectingcablesmust bedeterminedbytheoperatorincharge
oftheinstallation.
Werecommendusingsafetycables andsockets IMQapproved.
Checktheconnectionbyenablingthecuttingunitandverifythe
rotationdirection.Thecuttingunitisprovidedwithearthing
(yellow-greencable).Possiblefaultyearthingconnectionsmay
causeunsafe workingconditions.Possibledamagesarenot at
RASOR®s.r.l.charge.
Theelectricfeedingmustbesuppliedbyalineprotectedagainst
overcurrentbymeansoftheautomaticswitch(magnetothermal)ordelayedfuseswitha
suitabledimensions.Thecurrentofthesafetydevicesmustbeaslowaspossibleconsidering
themax.absorptionof themachine(seeidentificationplate).

EN
10
12.BLADESHARPENING
Aftermanyhoursof acontinuativeuseof thecutting
unit,orifitshouldnot beableto cutanymore,itis
necessaryto sharptheblade.
Tocarryoutthisoperation,startthebladeandpress
sharpener“2”locatedonitfor3-4seconds(bypressing
push button“1”,asshowninpicture6).
Repeattheoperation 2-3times.
Ifthesharpeningoperationisnot effective,check the
wearof emerygrindingwheel“3”(see picture7).If
emerygrindingwheel“3”istoo wornordirty,replace
itafterdisassemblingthebladebymeans of theproper
tool.
1
2
7
3
6
11.INSTALLATION AND USE
Toinstall andusethecuttingunit,proceedasfollows:
1)Fixthecuttingunitonlevelsquares orangles byusingthetwothreadedholes “A”for
5MA screwslocatedinthebladeholdersupport(seepicture4).
NOTE
Thecuttingunitcanbeinstalledin anyposition/angle:vertically,laterallyanditcanbeturned
upsidedown.Itisnotcompulsoryforthealuminiumbasetotouchthemachinetable.
2)Laythematerialto becut;
3)Connectthecuttingunitto theelectricfeeding;
4)Putthematerialonthecuttingbase;
5)Adjusttherightandleftmobileprotectioncovers“B” and“C”accordingto thethickness
ofthematerialtobecut(see picture5);
6)Carryoutthecuttingoperation.
NOTE
CuttingunitDD120RC canworkinafixedposition(thematerialhasto bemoved) oritcan
moveforwardwhilethematerialiskeptinthesameposition.Makesurethematerialto becut
isproperlystretched,preventingitfromcurling.
5
4
AB
C

EN
11
Ifthebladeisnomoreabletocut(even afterrepeating
thesharpeningoperationseveraltimes)itisnecessaryto
replaceit.Tocarryoutthisoperation,usebutterflywrench
“1”(showninpicture8).
Toreplacetheblade,proceedasfollows:
1) Usesomeprotectiveglovesincompliancewith
ItalianLegislativeDecree81/08.
2) Removethetwoadjustingknobs“A”and“D”of
therightandleftprotection covers“C”and“F”by
removingthetworelativewashers“B”and“E”
(seepicture9).
3) Unscrewscrews“M”andremovecounterblade“L”,
thenunscrewnut“G”byusingabutterflywrench
“1”andremoveblade“H”(see picture10).
4) Replacethewornbladewiththenewone“2”,
beingcarefultocenterthebladeonthegear,in
thecorrectposition;weremindyoutoassemble
itsothatthesidewiththewritingRasorcanbe
seenbytheoperator.
6)Assembleallthecomponentsagainandcarryout
thesharpening.
13.BLADEREPLACEMENT
9
D
8
1
10
E
F
A
B
C
H
1
G
2
14.SLIDING FOOTREGULATION
Foragoodcut,thecircularblademust alwaysbrush against
theslot endof theslidingfoot(withouttouchingit!).
Whenthebladewears,its diameterisreducedandtherefore
theslidingfootmust bebroughtagainneartheblade.Inorder
to reachthisgoal:
1) Unscrewscrew“A”underthebaseandbringthesliding
footneartheblade(see pictures11 and12).
2) Tightenscrew“A”againandcarryoutsomecuttests
(see picture12).
11
12
A
L
M

EN
12
15.SPAREPARTS /EXPLODEDVIEW
14.TROUBLESHOOTING
à
SOLUTION
Makesurethatthebladetouchestheslidingfoot
Checkthekindofmaterial
Sharpentheblade
Checkthematerialthickness
Checkthecompatibilitybetweenbladeandmaterial
Makesurethatthemotor turnscorrectly
Reducethefeedingspeed
Checktheslidingfootintegrity
Disassemblethebladeandremovethematerialresidues
Checktheslidingfootintegrity
ChecktheelectricconnectionsontheO.E.M.unit
Checktheelectricconnections
Checkthefeedingcable
Thecuttingunitstartsslowly,works
intermittentlyoritdoesnotstart
6
PROBLEM
Thematerialisnotcutoritgetsstuck
betweenthebladeandtheslidingfoot
Thecuttingunitisnoisy
CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
12CSW EXTRASTEELCIRCULARBLADEØ120
mm GRT12M27 UPPERMOTOR BEARING SW120700 ALLENSCREWFOR DD120BASE FIXING SW1255DDRMOTOR REST
F5055 WIDIACOUNTERBLADE GRT12M28 COMPENSATIONRING SW120800 ALLENSCREWFOR UPRIGHTFIXING SW1261DDGEAR
F7056 COUNTERBLADEFIXING SCREW GRT12M29 FASTENING NUT SW120900 STEELUPRIGHT SW126300 BLADEFIXINGRING NUT
GMT12DD COMPLETEMOTOR SERIESDD120,3-
ph380V50 Hz GRT27 FLAMERETARDANTFEEDING CABLE SW121100 STEELPIN SW1274DDR CRIGHTBASEWITHBEVELDD120R
GRT1213DDCOMPLETEROTOR SERIESDD120 GRT8615 SPACER SW121400 ALLENSCREWSFOR DD120SUPPORT
FIXING
SW1274DDR
CCPL
RIGHTBASEWITHBEVELDD120R,
COMPLETE
GRT12DD24 COMPLETEMOTOR FRAMESERIES
DD120 GRT8616 DOWELFASTENING THEFAN SW121600 L12MOTOR BEARING SW128600 MEDIUMGRAINEMERYØ30x10x6
GRT12DD26 LOWERMOTOR FLANGESERIES
DD120 SW108700 SHARPENERPIN SW122100 SHAFTHEADFIXINGSCREW SW1286CPLCOMPLETEEMERYUNIT
GRT12M17 MOTOR FRAMEFIXING SCREW SW108800 EMERYSPRING Ø11mm SW122300 STEELSTUDBOLT T105000 SCREWFOR FIXING THEPLATE
LOCKING THETHREAD
GRT12M18 MOTOR COVER SW108900 SHARPENERBUSH SW122400 STEELWASHER T1071DD SLIDING FOOT
GRT12M19 MOTOR FAN SW109000 EMERYSPRING Ø6mm SW122500 PROTECTIONCOVERADJUSTING
KNOB T107200 WASHER
GRT12M21 UPPERMOTOR COVER SW109100 SHARPENERCAPWITHBEARING SW122600 PLATELOCKING THETHREAD T107300 SLIDING FOOTFIXING SCREW
GRT12M22 MOTOR COVERFIXING SCREW SW109200 SHARPENERCAPFIXINGSCREW SW1244DDLLEFTALUMINIUMPROTECTIONCOVER T107500 BLADEASSEMBLING/DISASSEMBLING
WRENCH
GRT12M25 COMPLETETERMINALBOARD SW109300 WASHER SW1244DDR RIGHTALUMINIUMPROTECTION
COVER

SW122300
F5055
SW1244DDL
SW122400
SW122500
SW1274DDRC
T 1071DD
SW1274DDRCCPL
SW120700
T 107300
T 107200
12CSW
SW126300
GRT12M25
GRT12M29
GRT12DD26
GRT12M28
GRT12DD24
SW121600
GRT1213DD
GRT12M27
GRT12M21
GRT8615
GRT12M17
GRT12M18
GRT12M19
GRT8616
GRT12M22
GRT27
SW109200
SW1286CPL
SW108800
SW109300
SW128600
SW108700 SW109100 T 107500
SW109000
SW108900
GMT 12DD ( 380/400V , 50Hz )
SW120800
SW120900
T105000
T105000
SW122600
SW1261DD
SW121100
SW121400
SW1255DDR
SW1244DDR
SW122100
®
dal 1946
F7056

WARRANTY
Rasor®ElettromeccanicaS.r.l. cuttingunithasa12 monthwarrantyfromthedateindicated
on thelast pageof this manual,exceptin caseof differentwritten agreements.
Thewarrantycoversallmanufacturingandmaterialdefects.Replacementandrepairoperations
arecoveredonlyifcarriedoutbyourcompanyandatourworkshop.Ifin-warrantygoods
needto berepaired, thecustomermustalwayssendthecompletemachinetoRasor®.
Singleunitswill notbe repairedunderwarranty.
Thematerialto berepairedmust besentCARRIAGEFREE.
Oncethemachinehasbeenrepaired,itwill besentCARRIAGEFORWARDto thecustomer.
Thewarrantycoversneithertechnicians'interventiononsitenorthemachinedisassembly
fromtheinstallationplace.
Ifforpracticalreasons,oneof ourtechnicians issentto thepremises,thecustomerwill be
chargedthecosts plus thetravellingexpenses.
Thewarrantydoesnot include:
+failurecausedbywronguseorassembly,
+failurecausedbyexternalagents,
+failurecausedbylack of maintenanceorneglicence;
+blades andparts subjectto wear.
WARRANTYFORFEITURE:
+Incaseof arrearageorotherbreaches of contract,
+Wheneverchangesorrepairsarecarriedoutonourcuttingunits withoutourprior
authorization,
+Whenevertheserialnumberistamperedwithorcancelled,
+Wheneverthedamageiscausedbyimproperuse,badtreatment,bumps,fallsand
othercausesnot dueto normalworkingconditions,
+Whenevertheunitseemstamperedwith,dismantledorpreviouslyrepairedby
unauthorizedstaff,
+Incasethecuttingunits areusedforpurposesthataredifferentfromtheones
describedinthismanual.
All repair operations carriedoutunderwarrantydonotinterruptits duration.
All disputeswill be settledin thecourt ofjusticeofMilan(Italy).
We thankyouinadvancefortheattentionyouwill payto thismanualandweinviteyouto
informus of anychangeyoudeem necessaryto improveitandmakeitmorecomplete.

DECLARATIONOFCONFORMITY
WeherebycertifythatthedevicespecifiedhereundercompliestotherequirementsofMachinery
Directive2006/42/EC,ElectromagneticCompatibility2004/108/ECandCEI EN60204-1,
Directive2002/44/ECandto technicalrulingsUNIEN414:2002,UNIENISO 12100:2010.
Noisetests havebeencarriedoutaccordingto UNIENISO11202:2010 Standards.
CuttingunitDD120RC hasbeenproducedaccordingto workmanlikestandards.
We declarethattheabove-mentionedgoodscomplywiththestandardsinforceconcerning
safetyandhygieneatworkthatcanbeappliedto thematerialitselfaccordingto theItalian
legislativedecree No.81/08 (locallaw);theabove-mentionedgoodsarenot includedinthe
goodsindicatedinannexIVof MachineryDirective2006/42/EC.
1.Category: THREE-PHASE CUTTINGUNIT
2.Manufacturer: RASOR®ELETTROMECCANICA S.R.L.
3.Type: DD120RC
4.Serialnumber:..........................................................................................
5.Yearof manufacture:.................................................................................
6.Countryof manufacture: ITALY
7.Additionalinformation:.............................................................................
(Signature)
Date:
Warrantyexpiry:
12 months invoicedateorreceipt
RASORELETTROMECCANICAS.R.L.
CUTTING EQUIPMENTS

Authorizeddealer
(Stamp)