RASOR SW100 Mounting instructions

SW100 BENCH CUTTER
USE MANUAL

2
EN
COMPANY
ACKNOWLEDGMENT
Dear Customer,
thank you for choosing a Rasor®Elettromeccanica S.r.l. product.
Rasor®has been a reference point in the field of cutting systems in the textile, clothing,
furniture, tailoring, sport, chemical, automotive, nautical and insulating material sectors for
years. Its production has been always synonymous with reliability attested by many of
satisfied customers.
Rasor®quality system supervises all the company activities in order to provide the Customer
with a service that meets its needs and expectations in terms of product quality, delivery
reliability and stock of finished products.
All the parts of the devices have been planned and produced to guarantee an optimum
performance. In order to keep the high quality level and the long reliabilty of the Rasor®
products, it is recommended to use only original spare parts and to contact the head
office for any maintenance work.
Rasor®Elettromeccanica S.r.l. was established in Milan in 1946 by the two promoting partners
Spinelli and Ciminaghi. For more than sixty years it has been producing automatic cutting
systems, cutting units for textile applications and electric and pneumatic cutters.
Initially considered as a point of reference for cutting systems in the
textile applications, the Rasor®products are nowadays widely used in
other fields: chemical, automotive, nautical and sport sectors and in
furniture manufacturing.
Rasor®can rely on the professional continuity of three generations,
thanks to the precious support of the promoting partner, to his passion, dedication and
great experience of seventy years.
The main characteristic of Rasor®is that each working phase, starting from the manufacturing
of the product up to its packing and delivery is carried out in Rasor®premises by qualified
operators who have professionaly grown up following the spirit of the company and of its
founders. This ensures the high quality which Rasor® has always considered as essential
since the beginning of its activity.
Following the innovative spirit mentioned above, our company is constantly focused on the
improvement of the product quality, on the study and development of new materials and
technologies.

EN
3
1. GENERAL SAFETY RULES
This manual is an integral part of bench cutter SW100 and must be carefully
read before using it since it gives important indications with regards to its safe
installation, use and maintenance. Keep it with care.
Before using bench cutter SW100, read carefully the following general safety
rules.
• PACKAGING.
After taking off the packaging make sure that the bench cutter is intact. In
case of doubt do not use it and contact an authorized service centre. Do not
leave pieces of packaging (plastic bags, foam polystyrene, boxes, etc.) within
the reach of children or disabled persons since they are potential sources of
danger.
• AVOID DANGEROUS ENVIRONMENTS.
Prevent the bench cutter SW100 components from coming in contact with
damp or wet surfaces.
•KEEPCHILDRENAWAY.
Unauthorized persons, in particular children, must be kept away from the
working area.
•FEEDCABLE.
Prevent the feed cable from coming in contact with hot objects, pointed
surfaces or sharp edges. Never pull the feed cable of the machine. It must
never be replaced by the user. If necessary contact professionally qualified
staff.
• KEEP THE WORKING AREA ALWAYS IN ORDER.
The workplace must always be kept in order and well lightened; liquids or oil
traces must not be present.
• ALWAYS USE BENCH CUTTERS SW100 PROPERLY.
Use the bench cutters only to carry out the works they have been designed
for; do not use them improperly.
• OBSERVE THE USE OF THE TOOLS.
Do not cut excessively thick materials and always check blade conditions.
• AVOID ACCIDENTAL STARTINGS.
Before connecting bench cutter SW100, make sure that everything is installed
properly.
• CLOTHING.
Do not use large clothes or accessories that might get stuck in the moving
parts.
• GOGGLES AND PROTECTIVE METAL MESH GLOVES.
Always use goggles, protective metal mesh gloves approved by Rasor®during
use and maintenance operations (according to UNI EN 388:2004 standard).
•SPAREPARTS.
During maintenance and replacement operations use only original spare parts.
Blade maintenance must be only performed by Rasor®technicians.
• INSTALLATION.
Any installation that is not in conformity with these
specifications could jeopardize your safety and cancels the
warranty.

4
EN
ALL RIGHTS ARE RESERVED ACCORDING TO THE
INTERNATIONAL COPYRIGHT CONVENTIONS,
The reproduction of any part of this manual, in any form, is forbidden without
the prior written authorization of Rasor®Elettromeccanica S.r.l.
The content of this guide can be modified without prior notice. Great care has
been taken in collecting and checking the documentation contained in this
manual to make it as complete and comprehensible as possible.
Nothing contained in this manual can be considered as a warranty, either
expressed or implied - including, not in a restrictive way, the suitability warranty
for any special purpose. Nothing contained in this manual can be interpreted as a
modification or confirmation of the terms of any purchase contract.
Rasor®Elettromeccanica S.r.l. machines have not been conceived to work in areas at risk of
explosions and at high risk of fire and they cannot cut wet or damp materials. Moreover, they
cannot work in case of rain.
In case of damage or malfunction, bench cutter SW100 must not be used until the Customer
Care Technical Service has repaired them.
The original configuration of the bench cutter must not be changed at all.
On receiving the machine make sure the supply corresponds to what has been ordered.
In case of non-compliance immediately inform Rasor®.
Also make sure the cutter has not been damaged during transport.
Customer Care Technical Service
WARNING
The installer and the maintenance man must know the content of this manual. Although
the main features of the machine described in this manual are not subject to change,
Rasor®Elettromeccanica S.r.l. reserves the right to modify the components, details
and accessories it deems necessary to improve the machine or to meet manufacturing
or commercial requirements at any time and without being obliged to update this
manual immediately.
Informative letter
For any information, please contact
® ELETTROMECCANICA S.r.l.
Via V. Caldesi, 6; 20161, MILANO (MI) - ITALY
Tel: [phone]; Fax: [phone]
e-mail: [e-mail]
web: www.rasor-cutters.com
WARNING
RASOR

EN
5
SW100
220 230 50 60 190
850
2. TRANSPORT AND PACKAGING
The bench cutter is delivered in a cardboard box, inside which there are various options. The
code of the ordered product and its serial number are indicated outside the package (see
picture 1). The following accessories are contained in a bag inside the package:
1) Poligonal blade;
2) Wrench for blade nut disassembly.
3) Shuko cable without plug;
4) Fuse;
5) Drift for blade disassembly.
2
2
3. PLATE DATA
The manufacturer's identification and CE STANDARD 2006/42/CE conformity plate (see picture
below) is located on the front part of the bench cutter.
The plate must not be removed at all, even if the machine is resold. Always refer to the serial
number (written on the plate itself) when contacting the manufacturer.
Several safety warnings are printed on a card which is applied to the cutter feeding cable;
such warnings must be strictly followed by everyone dealing with the machine. The company
is not to be held responsible for damage to property or accidents to people which might
occur if the above-mentioned warnings are not observed. In such a case, the operator is the
only person responsible.
3
READ
THE
INSTRUCT ION
MANUAL
DO NOT
REMOVE
THE
SAFETY
DEVICES
HIGH
VOLTAGE
SHEARING
RISK
USE
METAL
GLOVES
USE
GOGGLES
1
1
Class II double insulation
Serial number
Year of production
Model
Electric data
4
5

6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a bench cutter model SW100 which is used in order
to cut strong fabrics. By cutting with the blade and the counterblade always in contact and
thanks to the steel upper quality of the blade supplied, SW100 cutter guarantees the clear
separation without frayings of the two borders of the cut material. The fixture is extremely
versatile, light and precise in the cutting operation. Thanks to the use of a sliding bearing
base and an effective cutting system with a poligonal blade, it is possible to use the bench
cutter to cut curved profiles not only in the textile and tannage sector, but also in several
industrial sectors such as to cut polymers, thermoacoustic insulators, padding, neoprene,
filters, synthetic fabrics and similar fabrics, moquette and internal parts of cars and ships.
The blade diameter (100mm) and the small weight (3Kg) make this bench cutter the ideal
fixture for cuts with small radius of curvature and with thickness up to 3,5 cm. The wide
sliding bearing base allows the operator to slide the cutter on the table without efforts. A
sharpener assembled on the cutter heads allows whetting the blade at any moment without
disassembling it. After carrying out this operation, it is possible to start cutting again. A high
power motor, perfectly balanced, with a high number of revolutions and totally free of
maintenance, reduces the vibrations to the minimum, thus making the bench cutter complies
with Legislative Decree No. 187 dated 19/8/2005, which adopts European Directive No.
2002/44/CE concerning the risks deriving from mechanical vibrations.The mechanical parts are
made of high quality steel, bronze and aluminium and require lubrication after several working hours.
1
23
4
11
7
8
10
5
6
12
13
14
15
9
16
1 Switch provided with light 9 Poligonal blade
2 Motor cover 10 Plate blocking the threads
3 Connector socket 11 Greaser
4 Motor frame 12 Safety catch to enable the starting
lever
5 Sharpener push button 13 Control lever
6 Motor support 14 Handle
7 Movable front protection 15 Complementary foot
8Roller platform covered with
Teflon
®
16 Counterblade
Device components

EN
7
7. FIELD OF APPLICATION
6. NOISE LEVEL
NOTE
It is advisable for bench cutter SW100’s owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree N.277 ITEM IV (DATED 15-08-91).
The use of ear protecting devices is compulsory.
The maximum acoustic pressure level emitted by bench cutter SW100 is about 60 dB (A).
Noise tests have been carried out in compliance with Standard ISO 11202 (1995). The
device noise levels, measured at different distances (without any sound wave filtering system),
vary in the extent of few db (A).
Bench cutter SW100 has been designed, manufactured and assembled to cut every kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary poligonal
blades.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- on wet or damp materials;
- to cut plastic, metal and wooden materials.
It is forbidden to use bench cutter SW100 for purposes different from the above-mentioned
ones.
5. TECHNICAL FEATURES
This technical data is only indicative and may be subject to change without notice.
100 mm with hard metal counter
blade
850 rpm
about 35 mm
Monophase 220 V - 90 W
1.00 AM
3000 g
4000 g
1,5 mt
LUX 200
< 2,5 m/s2
0 ~ 55°C
10 ~ 95% without condensate
Temperature
Humidity
Weight with package
Electric cable lenght
Minimum luminosity for working
o
p
erations
Vibrations at the start up
Cutting working depth
Motor power
Weight (with feeding cable)
Bench cutter SW100 features
Blade diameter
Blade speed
Max. Absorption
6 side blade Ø 100 mm, in H.S.S. steel
Circular blade Ø 100 mm, in Extra steel
4 side blade Ø 100 mm, in Germany Extra
steel
6 side blade Ø 100 mm, in H.S.S. steel
covered with Teflon
®
®
6 side blade Ø 100 mm, in H.S.S. steel in
hard integral metal
Cutter circular blade Ø 100 mm, in Extra
steel
Features of the available blades
10EHSS
10SEXTG
10CFR
10EMD
10EHSSTF
10CSW

8
EN
8. USE WARNINGS
We recommend following the indications below in order to always work in safety conditions.
•All the operations must be carried out complying strictly with the safety rules of the
country where the device is to be installed.
•It is STRICTLY FORBIDDEN to smoke during the installation or adjustment operations of
the bench cutter.
•The Customer undertakes to comply with and make his staff observe all the rules and
regulations in force concerning safety, prevention of accidents and health in the work
place. Therefore, the Customer assumes the responsibility to strictly follow all the rules and
regulations in force, as well as the special provisions in force in sport and public installations
the Customer declares to know after receiving all the relative necessary information.
•The bench cutter works also without its safety protective device. This protective device
must NEVER be removed.
•Always check the resistance of the material to be cut and the kind of blade which is being
used.
•The Customer shall equip his own personnel with all the individual safety protections for
the execution of the works, as well as with the ones which might be prescribed by the
Manufacturer due to specific danger conditions of the plant or of the area where the
personnel must work.
•Only one operator must use the bench cutter always standing behind the guide handle.
Do not make any adjustment while the blade is working or while the electric plug is
connected.
•Always pay attention to the electric cable position to prevent it from being cut or damaged
by the blade.
•It is allowed to assemble bench cutter SW100 on machines O.E.M. on condition that their
original structure is not modified. Otherwise, the intervention must be certified by Rasor®.
Firstly make sure that the lines are able to feed the cutter correctly, in compliance with the
safety rules (for the feature required see par. 5).
We suggest installing a magnetothermic safety device before the cutter and check
that the ground circuit is effective. Before working on the feeding cable pull the
plug out. Check that electric connections and protections correspond to the driving
force and to the plate data values (voltage and current),
required by the different electric circuits. Possible faulty ground
connections make the working conditions unsafe. Possible
damages are not charged to Rasor®. By referring to the EC 11-
27/1 standard all the works carried out by means of electric
current must be performed by a staff, who has been provided
with all the devices required by the above-mentioned
standard. For the works carried out under voltage, it is
necessary that the employer certifies the suitability, against
formative processes. As the cutter SW100 is supplied without
plug, the user must use a plug homologated in the country in
which the cutter is used. In the European Countries a Shuko plug
is required (see picture 3). Never change the lenght of the cable
supplied.
WARNING
3
9. ELECTRIC CONNECTION

EN
9
10. RESIDUAL RISKS
11. USE
Even though the bench cutter is safe, operators must pay attention to preserve their and
other people’s safety.


At the end of the working operations, the motor could be very hot.

The cutting blade can work even when the protective device is disassembled.
To use the bench cutter manually, proceed as follows:
1) Lay the material to be cut on a table;
2) Connect the cutter to the electric feeding (see picture 4);
3) Put the material on the sliding base;
4) Adjust the front mobile protection according to the thickness of the material to be cut;
5) Enable the switch; once it has been enabled, it lights with a green light (see picture 5);
6) Press the starting lever after having moved the safety catch (see picture 6);
7) Push the bench cutter to the desired direction, by trying to put the material in front
of itself as stretched as possible, preventing it from curling in the front part of the
cutter. To work, the cutter must be placed on a surface and must slide by means of
the rolls placed under the sliding platform.
NOTE:
The thrust on the bench cutter must be as uniform as possible. To carry out linear cuts with
precision (and to follow predetermined paths), we also recommend using the arrow point
(see point “A” in picture 7).
5
4
67
A


10
EN
12. BLADE SHARPENING
13. LUBRICATION
Every 3-4 working hours, it is necessary to lubricate
the pair of gears. To carry out this operation, remove
protective plug “A” located on the motor support of
the bench cutter and fill it with lubricating grease Rasor.
Screw plug “A” again few turns. Screw plug “A” some
turns every 2-3 working hours (see picture 10).
The blade must never be dirty with grease or oil.
10
WARNING
A
After many hours of a continuative use of the bench
cutter, or if it would not be able to cut anymore, it is
necessary to sharp the blade.
To carry out this operation, start the blade and press
sharpener “2” located on it for 3-4 seconds (by pressing
push button “1”, as shown in picture 8).
Repeat the operation 2-3 times.
If the sharpening operation is not effective, check the
wear of emery grinding wheel “3” (see picture 9).
If grinding wheel “3” is too worn or dirty, replace it.
1
2
9
3
8
14. MOTOR BRUSH REPLACEMENT
Worn motor brushes could create a cutter malfunction (no starting, intermittent start,
etc.), therefore it should be better to verify their wear periodically.
Open the motor cover by unscrewing 4 screws “4” on the cutter head (see picture 11).
Remove the metal contacts that close the brushes with a slotted screwdriver (see picture
12). Remove the brushes and check their wear: if the graphite has a length shorter than 15
mm or it is uneven, replace it (see picture 13).
Close the metal contacts again by making sure that they adhere well to the metal part of
the brush. Finally close the motor cover again.
11 12
13
4

EN
11
If the blade is no more able to cut (even after repeating
the sharpening operation several times) it is necessary to
replace it. To carry out this operation, use wrench “1”
and drift “3” locking the blade (shown in picture 14).
To replace the blade, proceed as follows:
1) Use some protective gloves in compliance with Le-
gislative Decree 242 dated 19 March 1996 (use of
personal protection devices);
2) Remove the fixed rear safety protection “A” (see
picture 15) by unscrewing the cross screw “C”
and “D” by means of a screwdriver (not supplied
by the manufacturer) as shown in picture 16.
Remove the mobile front safety protection “B” (see
picture 15) by unscrewing pin “E” and removing
the two washers “F” as shown in picture 16.
3) Insert drift “3” (see picture 14) into hole “G”, so
as to lock the blade (the hole on the blade must
correspond to the one on the structure).
4) Use wrench “1” to unscrew nut “H” and remove
blade “L” (see picture 17).
5) Replace the worn blade with the new one “2”,
being careful to center the blade on the gear, in
the correct position, and remember to assemble it,
so taht the Rasor writing can be seen by the
operator.
6) Assemble all the components again and carry out
the sharpening.
15. BLADE REPLACEMENT
1
14
15
BA
16
C
D
F
G
L
1
H
17
3
2
E

12
EN
17. SPARE PARTS / EXPLODED VIEW
16. TROUBLESHOOTING


SOLUTION
Check that the blade and the counterblade are in contact
Check the kind of fabric
Sharpen the blade
Check the fabric thickness
Check the compatibility between blade and fabric
Make sure that the motor turns correctly
Reduce the feeding speed
Check the counterblade integrity
Carry out the lubrication
Disassemble the blade and remove the material residues
Check the wear of the pair of gears
Check the protection fuse with a tester
Check the electric connections
Check the motor brushes
Check the feeding cable
The cutter starts slowly, works intermittently
or it does not start

PROBLEM
The cutter is noisy
The fabric is not cut or it gets stuck between
the blade and the counterblade
CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
10EHSS 6-SIDE BLADE Ø 100 mm, H.S.S. STEEL SW1086CPL COMPLETE SHARPENER T 101700 ADJUSTING RING T 1029F10 FUSE 2A
SW101800 WORM SCREW - 3P, M 0.9 SW108700 SHARPENER PIN T 101801 ELASTIC PIN T 103000 SCREW FASTENING THE HANDLE
SWITCH/PUSH BUTTON
SW1018CPL COMPLETE PAIR OF GEAR SW108800 EMERY SPRING Ø 11 mm T 101900 LOWER MOTOR CAP T 104500 SCREW FASTENING THE FRONT
PROTECTION
SW104100 REAR PROTECTION GUARD SW108900 SHARPENER BUSH T 102000 UPPER MOTOR CAP T 104501 PAIR OF CONVEXED WASHERS
SW104101 SCREW FASTENING THE REAR
PROTECTION GUARD SW109000 EMERY SPRING Ø 6 mm T 102001 SCREW FASTENING THE UPPER COVER T 104700 GREASER CAP
SW104102 OILER RING SW109100 SHARPENER CAP WITH BEARING T 102100 SCREW FASTENING THE LOWER
COVER T 104800 GREASER
SW104103 OILER RING SPRING SW109200 SCREW FASTENING THE SHARPENER
CAP T 102200L MOTOR FRAME WITH MAGNETS T 104900 PLATE BLOCKING THE THREAD
SW1041CPL REAR PROTECTION SET SW109300 WASHER T 102201 PAIR OF PERMANENT MAGNETS T 105000 SCREW 2.6MA FASTENING THE PLATE
BLOCKING THE THREAD
SW104400 FRONT PROTECTION GUARD T 100102 MOTOR CAP WITH SLOT T 102300L HANDLE SECTOR, SERIES >1999 T 105200 MOTOR SUPPORT FIXING BOLT
SW1044CPL FRONT PROTECTION SET T 100200 SCREW FASTENING THE MOTOR CAP T 102400 SCREW FASTENING THE HANDLE
SECTOR T 105300 SPLIT WASHER
SW105000 CORRUGATED THRUST WASHER T 100201 SOCKET SCREW T 102701 THREE-POLE PLUG WITH FAIRLEAD T 105400 ANTI-FRICTION BUSH
SW1055CPL COMPLETE MOTOR SUPPORT T 100300 ADJUSTMENT LOCKING SCREW T 102702 THREE-POLE SOCKET T 105600 WASHER
SW1059CPL COMPLETE GEAR BEVEL T 100400 MOTOR BEARING ASJUSTMENT T 1027CPL FEEDING CABLE WITHOUT PLUG T 105700 RING LOCKING THE GEAR BEVEL
BEARING
SW107101 COMPLEMENT FOOT T 100600 CARBONCINO CON FILAMENTO T 102900 HANDLE SWITCH WITH LIGHT T 105800 GEAR BEVEL BEARING
SW107400 SIMPLE PLATFORM T 100700 PORTACARBONCINO T 102901F FEEDING ELECTRONIC CIRCUIT (WITH
FUSE) T 106000 LEFT SCREW FASTENING THE GEAR
BEVEL
SW1074CPL COMPLETE PLATFORM T 100800 MOLLETTA CONTATTO CARBONCINO T 102902 HANDLE PUSH BUTTON T 106100 RING UNDER BLADE
SW107700 COUNTERBLADE HOLDER SPRING T 100900 VITE FISS. PORTACARBONCINO T 102903 PUSH BUTTON FOR HANDLE LEVER T 106300 RING NUT FASTENING THE BLADE
SW107701 SCREW FASTENING THE
COUNTERBLADE HOLDER SPRING T 101000 CUSCINETTO MOTORE Ø 7 mm T 102904 CAP SWITCH WITHOUT LIGHT T 106400 PLATFORM PIN
SW107800 PLATFORM SECTOR T 101200 ANTI-GREASE WASHER T 102904L CAP SWITCH WITH LIGHT, SERIES
2008 T 1064CPL PLATFORM SLIDING PIN
SW107900 SCREW FASTENING THE
COUNTERBLADE HOLDER T 101300 COMPLETE ROTOR 220 V T 102906 RATCHET AND LEVER FIXING PIN T 106500 PLATFORM ROLL
SW108000 COUNTERBLADE HOLDER T 101301 COMPLETE ROTOR 110 V T 102908 CONTROL LEVER T 106800 SCREW FASTENING THE PLATFORM
ROLL
SW108100 HARD METAL COUNTERBLADE T 101302 COMPLETE ROTOR 48 V T 102908CPL COMPLETE CONTROL LEVER T 107000 SCREW FASTENING THE
PLATFORM/SECTOR
SW108200 SCREW FASTENING THE
COUNTERBLADE T 101500 FAN T 102909 RATCHET FOR LEVER T 107500 BLADE ASSEMBLING/DISASSEMBLING WRENCH
SW108600 EMERY Ø 25x9x6 mm T 101600 MOTOR BEARING Ø10 mm T 102910 RATCHET SPRING T 107600 DRIFT LOCKING THE BLADE
T 107900 LUBRICATING GREASE

SW104400
T 1064CPL
SW107701
SW107700
SW107400
SW107800
10EHSS
T 104900
SW108600
SW1086CPL
SW1055CPL
SW109000
SW108700
SW108800
SW108900
SW109200
SW109100
SW109300
T104800
T 105800
T 105700
T 106000
T 105600
SW1044CPL
T 104500
T 101900
SW 1018CPL
T101500
T 102903
T 101300 - V220-230 T 101301 - V110 T 101302 - V48
T 102201
T 102200L
T 100300
T 102001
T 100400
T 100900
T101200
T 1029F10
T 102901F
T102000
T105000
T105000
T107000
SW10800
T 100700
T 100900
T 100201
T 100600
T 102300L
T 102908CPL
T 102904
T 102702
T 102904L
T 102906
T 102909
T 102906
T 102910
T 107900
T 1027 CPL
T 102908
T 103000 T 103000
T 102902
T 107600
T 100200
T 102400
T 100800
T 102100
T 103000T 103000
T 102900 T 107500
T104700
SW108200
SW107101
SW107900
SW108100
T 100102
®
dal 1946
T 101700
T 101801
T 101600
SW100500
T101000
SW 101800
SW 1059CPL
T 102701
T 105300
T 105200
T105400
SW104102
SW104103
SW104101
SW104101
SW104100
SW1041CPL
SW 1059CPL
T 106400
T 106800
SW1074CPL
T 106500
T 106300
T 106100
T104501

WARRANTY
Rasor®Elettromeccanica S.r.l. bench cutter has a 12 month warranty from the date indicated
on the last page of this manual, except in case of different written agreements.
The warranty covers all manufacturing and material defects. Replacement and repair operations
are covered only if carried out by our company and at our workshop.
The material to be repaired must be sent CARRIAGE FREE.
Once the machine has been repaired, it will be sent CARRIAGE FORWARD to the customer.
The warranty covers neither technicians' intervention on site nor the machine disassembly
from the installation place.
If for practical reasons, one of our technicians is sent to the premises, the customer will be
charged the costs plus the travelling expenses.
The warranty does not include:
failure caused by wrong use or assembly,
failure caused by external agents,
failure caused by lack of maintenance or neglicence;
blades and parts subject to wear.
WARRANTY FORFEITURE:
In case of arrearage or other breaches of contract,
Whenever changes or repairs are carried out on our cutters without our prior
authorization,
Whenever the serial number is tampered with or cancelled,
Whenever the damage is caused by improper use, bad treatment, bumps, falls and
other causes not due to normal working conditions,
Whenever the unit seems tampered with, dismantled or previously repaired by
unauthorized staff,
In case the bench cutters are used for purposes that are different from the ones
described in this manual.
All repair operations carried out under warranty do not interrupt its duration.
All disputes will be settled in the court of justice of Milan (Italy).
We thank you in advance for the attention you will pay to this manual and we invite you to
inform us of any change you deem necessary to improve it and make it more complete.

RASOR ELETTROMECCANICA SRL
Via Vincenzo Caldesi 6
20161 Milan ∙ Italy
ph. [phone]
fax [phone]
[email protected]om
www.rasor-cutters.com
FOLLOW US: