RASOR SW12SSM User manual

CUTTING UNIT
USE MANUAL
SW12
SSM
SW12
SSM

2
EN
COMPANY
ACKNOWLEDGEMENT
Dear Customer,
thank you for choosing a Rasor®Elettromeccanica S.r.l. product.
Rasor®has been a reference point in the field of cutting systems in the textile, clothing,
furniture, tailoring, sport, chemical, automotive, nautical and insulating material sectors for
years. Its production has always been synonymous with reliability attested by many of
satisfied customers.
Rasor®quality system supervises all the company activities in order to provide the Customer
with a service that meets its needs and expectations in terms of product quality, delivery
reliability and stock of finished products.
All the parts of the devices have been designed and produced to guarantee an optimum
performance. In order to keep the high quality level and the long reliabilty of the Rasor®
products, it is recommended using only original spare parts and to contact the head office
for any maintenance work.
Rasor®Elettromeccanica S.r.l. was established in Milan in 1946 by Luigi Spinelli. For more
than sixty years it has been producing automatic cutting systems, cutting units for textile
applications and electric and pneumatic cutters.
Initially considered as a point of reference for cutting systems in the
textile applications, the Rasor®products are nowadays widely used in
other fields: chemical, automotive, nautical and sport sectors and in
furniture manufacturing.
Rasor®can rely on the professional continuity of three generations,
thanks to the precious support of the promoting partner, to his passion, dedication and great
experience of seventy years.
The main characteristic of Rasor®is that each working phase, starting from the manufacturing
of the product up to its packing and delivery is carried out in Rasor®premises by qualified
operators who have professionaly grown up following the spirit of the company and of its
founders. This ensures the high quality which Rasor® has always considered as essential since
the beginning of its activity.
Following the innovative spirit mentioned above, our company is constantly focused on the
improvement of the product quality, on the study and development of new materials and
technologies.

EN
3
1. GENERAL SAFETY RULES
This manual is an integral part of cutting unit SW12SSM and must be carefully
read before using it, since it gives important indications with regards to its safe
installation, use and maintenance. Keep it with care.
Before using cutting unit SW12SSM, carefully read the following general safety
rules.
• PACKAGING.
After taking off the packaging make sure that the cutting unit is intact. In
case of doubt do not use it and contact an authorized service centre. Do not
leave pieces of packaging (plastic bags, foam polystyrene, boxes, etc.) within
the reach of children or disabled persons, since they are potential sources of
danger.
• AVOID DANGEROUS ENVIRONMENTS.
Prevent the cutting unit SW12SSM components from coming in contact with
damp or wet surfaces.
•KEEPCHILDRENAWAY.
Unauthorized persons, in particular children, must be kept away from the working
area.
•FEEDINGCABLE.
Prevent the feeding cable from coming in contact with hot objects, pointed
surfaces or sharp edges. Never pull the feeding cable of the machine. It must
never be replaced by the user. If necessary contact professionally qualified
staff.
• KEEP THE WORKING AREA ALWAYS IN ORDER.
The workplace must always be kept in order and well lightened; liquids or oil
traces must not be present.
• ALWAYS USE CUTTING UNITS SW12SSM PROPERLY.
Use the cutting units only to carry out the works they have been designed
for; do not use them improperly.
• OBSERVE THE USE OF THE TOOLS.
Do not cut excessively thick materials and always check blade conditions.
• AVOID ACCIDENTAL STARTINGS.
Before connecting cutting unit SW12SSM, make sure that everything is installed
properly.
• CLOTHING.
Do not use large clothes or accessories that might get stuck in the moving
parts.
• GOGGLES AND PROTECTIVE METAL MESH GLOVES.
Always use goggles, protective metal mesh gloves approved by Rasor®during
use and maintenance operations (according to UNI EN 388:2004 standard).
•SPAREPARTS.
During maintenance and replacement operations use only original spare parts.
Blade maintenance must be only performed by Rasor®technicians.
• INSTALLATION.
Any installation that is not in conformity with these
specifications could jeopardize your safety and cancels the
warranty.

4
EN
ALL RIGHTS ARE RESERVED ACCORDING TO THE
INTERNATIONAL COPYRIGHT CONVENTIONS,
The reproduction of any part of this manual, in any form, is forbidden without the
prior written authorization of Rasor®Elettromeccanica S.r.l.
The content of this guide can be modified without prior notice. Great care has
been taken in collecting and checking the documentation contained in this
manual to make it as complete and comprehensible as possible.
Nothing contained in this manual can be considered as a warranty, either
expressed or implied - including, not in a restrictive way, the suitability warranty
for any special purpose. Nothing contained in this manual can be interpreted as a
modification or confirmation of the terms of any purchase contract.
Rasor®Elettromeccanica S.r.l. products have not been conceived to work in areas at risk of
explosions and at high risk of fire and they cannot cut wet or damp materials. Moreover, they
cannot work in case of rain.
In case of damage or malfunction, cutting unit SW12SSM must not be used until the Customer
Care Technical Service has repaired them.
The original configuration of the cutting unit must not be changed at all.
On receiving it make sure the supply corresponds to what has been ordered.
In case of non-compliance immediately inform Rasor®.
Also make sure the cutting unit has not been damaged during transport.
Customer Care Technical Service
WARNING
The installer and the maintenance man must know the content of this manual. Although
the main features of the machine described in this manual are not subject to change,
Rasor®Elettromeccanica S.r.l. reserves the right to modify the components, details
and accessories it deems necessary to improve the machine or to meet manufacturing or
commercial requirements at any time and without being obliged to update this manual
immediately.
Informative letter
For any information, please contact
RASOR®ELETTROMECCANICA S.r.l.
Via V. Caldesi, 6; 20161, MILANO (MI) - ITALY
Tel: [phone]; Fax: [phone]
e-mail: [e-mail]
web: www.rasor-cutters.com
WARNING

EN
5
SW12SSM
220 230 50 60 2,5 350
550
JM
___
12
2
3
1
4
2. TRANSPORT AND PACKAGING
The cutting unit is delivered in a suitcase, inside which there are various options. The code of
the ordered product and its serial number are indicated outside the package (see picture 1).
The following accessories are contained in a bag inside the package:
1) Polygonal blade;
2) Wrench for blade nut disassembly.
3) Shuko cable without plug;
4) Drift for blade disassembly.
3. PLATE DATA
The manufacturer's identification and EC STANDARD 2006/42/EC conformity plate (see picture
below) is located on the front part of the cutting unit.
The plate must not be removed at all, even if the machine is resold. Always refer to
the serial number written on the plate when contacting the manufacturer.
Several safety warnings are printed on a card which is applied to the feeding cable of the
cutting unit; such warnings must be strictly followed by everyone dealing with the machine.
The company is not to be held responsible for damage to property or accidents to
people which might occur if the above-mentioned warnings are not observed. In
such a case, the operator is the only person responsible.
Class II double insulation
Serial number
Year of production
Model
Electric data
READ
THE
INSTRUCT IO N
MANUAL
DO NOT
REMOVE
THE
SAFETY
DEVICES
HIGH
VOLTAGE
SHEARING
RISK
USE
METAL
GLOVES
USE
GOGGLES

6
EN
1
2
3
4
7
8
6
5
9
10
11
12
4. PRODUCT DESCRIPTION
The fixture described in this manual is a cutting unit model SW12SSM which can be assembled
on automatic machines (e.g. spreaders, computerized cutting, etc.) by means of proper
holes located in the motor support. SW12SSM can operate continuously and it can cut at
various heights by means of multiple installation. By cutting with the blade and the
counterblade always in contact and thanks to the steel upper quality of the blade supplied,
SW12SSM ensures the clean separation without frayings of the two borders of the cut
material. Thanks to an effective cutting system with polygonal blade, it is possible to use
the cutting unit to cut profiles not only in the textile and tannage sector, but also in several
industrial sectors such as to cut polymers, thermoacoustic insulators, padding, neoprene,
filters, synthetic fabrics and similar fabrics, moquette and internal parts of cars and ships,
glass and carbon fibres. The 220V single-phase motor ensures a high blade surface speed
(280m/min) enabling cuts with high feed and traverse speed. The blade diameter (120mm)
and the motor power (350 Watt) ensure cuts with thickness up to 5 cm. A sharpener
assembled on the cutting unit head allows sharpening the blade at any moment without
disassembling it. After carrying out this operation, it is possible to start cutting again. A high
power motor, perfectly balanced, with a high number of revolutions and totally free of
maintenance, reduces the vibrations to the minimum so that the cutting unit complies with
European Directive No. 2002/44/EC concerning the risks deriving from mechanical vibrations.
The mechanical parts are made of high resistance steel, bronze and aluminium and require
lubrication after several working hours.
1 S wit ch p ro vid ed w it h lig h t 7 M ov ab le f ro nt g uar d
2 Motor cover 8 Aluminium plat form covered
with Teflon®
3 Connector socket 9 Polygonal blade
4 Motor frame 10 Grease nipple
5 Sharpening p ush b ut t on 11 Carbide co unt erb lad e
6 Motor support 12 Structure
Device components

EN
7
7. FIELD OF APPLICATION
6. NOISE LEVEL
NOTE
It is advisable for cutting unit SW12SSM owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree 81/08.
The maximum acoustic pressure level emitted by cutting unit SW12SSM is about 60 dB (A).
Noise tests have been carried out in compliance with Standard UNI EN ISO 11202:2010. The
device noise levels, measured at different distances (without any sound wave filtering system),
vary in the extent of few db (A).
Cutting unit SW12SSM has been designed, manufactured and assembled to cut any kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary polygonal
blades. This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- on wet or damp materials;
- to cut plastic, metal and wooden materials.
It is forbidden to use cutting unit SW12SSM for purposes different from the above-
mentioned ones.
5. TECHNICAL FEATURES
The technical data are only indicative and they can be changed without notice.
120 mm with carbide counterblade
550 rev./min
about 50 mm
Single-phase 220V (110V on
re
q
uest
)
- 350W
2.5 A
3300 g
5500 g
1.5 mt
LUX 200
< 2.5 m/s2
0 ~ 55°C
10 ~ 95% without condensate
Cutting working depth
Motor power
Weight (with feeding cable)
SW12SSM cutting unit features
Blade diameter
Blade speed
Max. absorption
Working temperature
Working humidity
Weight (with package)
Electric cable length
Minimum light for working
o
p
erations
Vibration at the start up
8 side blade Ø 120 mm, in H.S.S. steel
12 side blade Ø 120 mm, in H.S.S. steel
Circular blade Ø120 mm, inH.S.S. steel
8 side blade Ø 120 mm, in H.S.S. steel
covered with TIN
12 side blade Ø 120 mm, in H.S.S. steel
covered with TIN
8 side blade Ø 120 mm, in integral carbide
8 side blade Ø 120 mm, in H.S.S. steel
covered with Teflon®
12SHSSTF
Features of the available blades
12SHSS
12CHSS
12SMD
12DHSSTN
12SHSSTN
12DHSS

8
EN
3
8. USE WARNINGS
We recommend following the indications below in order to always work in safety conditions.
•All the operations must be carried out strictly complying with the safety rules of the
country where the device is to be installed.
•It is STRICTLY FORBIDDEN to smoke during the installation or adjustment operations of
the cutting unit.
•The Customer undertakes to comply with and make his staff observe all the rules and
regulations in force concerning safety, prevention of accidents and health in the work
place. Therefore, the Customer assumes the responsibility to strictly follow all the rules
and regulations in force, as well as the special provisions in force in sport and public
installations the Customer declares to know after receiving all the relevant necessary
information.
•The cutting unit works also without its safety protective device. This
protective device must NEVER be removed.
•Always check the resistance of the material to be cut and the kind of blade which is
being used.
•The Customer shall equip his own personnel with all the individual safety protections
for the execution of the works, as well as with the ones which might be prescribed by
the Manufacturer due to specific danger conditions of the plant or of the area where the
personnel must work.
•Always pay attention to the electric cable position to prevent it from being cut or
damaged by the blade.
•It is allowed to assemble cutting unit SW12SSM on O.E.M. machines on condition that
their original structure is not modified. Otherwise, the intervention must be certified by
Rasor®.
Firstly make sure that the lines and the electrical systems to which SW12SSM will be connected
are able to feed the cutting unit correctly, in compliance with the safety rules (for the
features required see par. 5).
We suggest installing a magnetothermic safety device before the cutting unit and check
that the ground circuit is effective. Before working on the feeding cable pull the plug out.
Check that electrical connections and protections correspond to the
driving force and the plate data values (voltage and current), required
by the different electric circuits. Possible faulty ground connections
make the working conditions unsafe. Possible damages are not to be
charged to Rasor®. By referring to the EC 11-27/1 standard all the
works carried out by means of electric current must be performed by
a staff, who has been provided with all the devices required by the
above-mentioned standard. For the works carried out under voltage,
it is necessary that the employer certifies the suitability of these devices
with formative processes. As the cutting unit SW12SSM is supplied
without plug, the user must use a plug homologated in the country
in which the cutting unit is used. In the European countries a Shuko plug
is required (see picture 3). Never change the length of the cable supplied.
The cutting unit SW12SSM is a class II electric device, therefore it does
not need any grounding cable.
9. ELECTRIC CONNECTION
WARNING

EN
9
45
7
6
8
10. RESIDUAL RISKS
11. INSTALLATION AND USE
Even though the cutting unit is safe, operators must pay attention to preserve their and
other people’s safety.


At the end of the working operations, the metal parts could be very hot.

The cutting blade can work even when the protective devices are disassembled.
To install and use the cutting unit manually, proceed as follows:
1) Fix the cutting unit on level squares or angles by means of four 5MA screws, by inserting
them in the four holes located in the motor lower cover (see pictures 4 and 5).
NOTE
The cutting unit can be installed in any position/angle: vertically, laterally and it can be turned
upside down. It is not compulsory for the aluminium base to touch the machine table.
2) Lay the material to be cut;
3) Connect the cutting unit to the electric power (see picture 6);
4) Put the material on the cutting foot (see picture 7);
5) Adjust the movable front guard according to the thickness of the material to be cut
(see picture 7);
6) Enable the switch; once it has been enabled, it lights up with a green light (see
picture 8);
7) Carry out the cutting operation.
NOTE
Cutting unit SW12SSM can work in a fixed position (the material has to be moved) or it can
move forward while the material is kept in the same position. Make sure the material to be
cut is properly stretched, preventing it from curling.
WARNING
Never use the two bolts which fix the motor to the cutting part to fasten cutting
unit SW12SSM. This operation may cause the motor shaft to break. In this case,
warranty is not valid.

10
EN
12. AFFILATURA DELLA LAMA
12 13
14
4
1
2
10
3
9
11
A
12. BLADE SHARPENING
13. LUBRICATION
Every 3-4 working days, it is necessary to lubricate the
pair of gears. To carry out this operation, remove
protective plug “A” located on the motor support of
the cutting unit and fill it with Rasor®lubricating grease.
Screw plug “A” again few turns. Screw plug “A” some
turns every 2-3 working days (see picture 11).
The blade must never be dirty with grease or oil.
WARNING
After many hours of a continuative use of the cutting
unit or if it is not be able to cut anymore, it is necessary
to sharpen the blade.
To carry out this operation, start the blade and press
sharpener “2” located on it 3-4 seconds (by pressing
push button “1”, as shown in picture 9).
Repeat the operation 2-3 times.
If the sharpening operation is not effective, check the
wear of emery grinding wheel “3” (see picture 10).
If grinding wheel “3” is too worn or dirty, replace it.
14. MOTOR BRUSH REPLACEMENT
Worn motor brushes could cause the cutting unit to work improperly (no starting, intermittent
start, etc.), therefore it should be better to verify their wear periodically.
Open the motor cover by unscrewing 4 screws “4” on the cutting unit head (see picture
12). Remove the metal contacts that close the brushes with a slotted screwdriver (see
picture 13). Remove the brushes and check their wear: if the graphite has a length shorter
than 15 mm or it is uneven, replace it (see picture 14).
Close the metal contacts again by making sure that they adhere well to the metal part of the
brush. Finally close the motor cover again.

EN
11
16
A
B
15
1
2
3
17
E
F
H
1
G
18
D
C
If the blade is no more able to cut (even after repeating
the sharpening operation several times) it is necessary to
replace it. To carry out this operation, use butterfly
wrench “1” and drift “3” locking the blade (shown in
picture 15).
To replace the blade, proceed as follows:
1) Use some protective gloves in compliance with
Italian Legislative Decree 81/08;
2) Remove the fixed rear safety guard “A” (see picture
16) by unscrewing the cross-slotted screws “C”
by means of a screwdriver (not supplied by the
manufacturer) as shown in picture 17.
Remove the movable front safety guard “B” (see
picture 16) by unscrewing pin “D” and by removing
washer “E” as shown in picture 17.
3) Insert drift “3” (see picture 15) into hole “F”, so
as to lock the blade (the hole on the blade must
correspond to the one on the structure).
4) Use butterfly wrench “1” to unscrew nut “G” and
remove blade “H” (see picture 18).
5) Replace the worn blade with the new one “2”,
being careful to center the blade on the shaft in
the correct position; we remind you to assemble
it so that the side with the writing Rasor can be
seen by the operator.
6) Assemble all the components again and carry out
the sharpening.
15. BLADE REPLACEMENT

12
EN
17. SPARE PARTS / EXPLODED VIEW
16. TROUBLESHOOTING


SOLUTION
Make sure that the blade touches the counterblade
Check the kind of fabric
Sharpen the blade
Check the fabric thickness
Check the compatibility between blade and fabric
Make sure that the motor turns correctly
Reduce the feeding speed
Check the counterblade integrity
Carry out the lubrication
residues
Check the wear of the pair of gears
Check the electrical connections
Check the motor brushes
Check the feeding cable
Check for possible electrical problems on the O.E.M. unit
The cutting unit starts slowly, works
intermittently or it does not start

PROBLEM
The cutting unit is noisy
The fabric is not cut or it gets stuck between
the blade and the counterblade
CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
12SHSS 8 SIDE BLADE Ø 120 mm, IN H.S.S.
STEEL SW121301P COMPLETE ROTOR 110 V SW126102 REFERENCE PIN T 100900 BRUSH HOLDER FIXING SCREW
SW1022S MOTOR FRAME WITH MAGNETS,
WITHOUT HANDLE SW1213P COMPLETE ROTOR 220 V S W126103 GEAR RING FIXING SCREW 2,5MA T 101801 ELASTIC PIN
SW1029S ELECTRONIC FEEDING CIRCUIT SW121500 FAN SW126201-
1P GEAR RING T 102001 UPPER CAP FIXING S CREW
SW1037S FEEDING CIRCUIT FASTENING SCREW SW121600 MOTOR BEARING L12 SW126300 RING NUT FIXING THE BLADE T 102100 LOWER CAP FIXING S CREW
SW1076S SPRING WITH DOWEL SW121700 ELASTIC RING SW127201 GEAR BEARING R6 T 102201 PAIR OF PERMANENT MAGNETS
SW107900 SCREW FOR THE COUNTERBLADE
HO LD ER F IX I NG
SW121800-
1P GEAR WORM SCREW SW127500 GEAR BEARING ADJUSTING DEVICE T 102702 CONNECTOR SOCKET - THREE POLES
SW1080S COUNTERBLADE HOLDER SW121801CP
L-1P COMPLETE PAIR OF GEAR SW127501 ADJUSTING DEVICE FIXING THE DOW EL T 1027CPL FEEDING CABLE WITHOUT PLUG
SW1081S CARBIDE COUNTERBLADE SW1219S LOWER MOTOR CAP SW127502 WASHER T 102904L CAP SWITCH WITH LIGHT
SW108200 COUNTERBLADE FIXING S CREW SW122000 UPPER MOTOR CAP SW127600 CLOSING CAP T 104700 GREASER CAP
SW108700 SHARPENER PIN SW1238S LEFT STEEL STRUCTURE Monster
series SW128600 MEDIUM GRAIN EMERY Ø 30x10x6 T 104800 GREASER
SW108800 EMERY SPRING Ø 11 mm SW123900 S TRUCTURE FIXING SCREW SW1286CPL COMPLETE EMERY UNIT T 105200 MOTOR SUPPORT FIXING BOLT
SW108900 SHARPENER BUSH SW124000 STRUCTURE SUPPORT SCREW SW1290MS LEFT BASE WITH BEVEL Monster T 105300 SPLIT WASHER
SW109000 EMERY SPRING Ø 6 mm SW124101 3x10 MA SCREW FOR REAR GUARD
FIXING
SW1290MSC
PL
COMPLETE LEFT BASE WITH BEVEL
Monster T 105400 ANTI-FRICTION BUS H
SW109100 SHARPENER CAP WITH BEARING SW1241S REAR PROTECTION GUARD T 100102 MOTOR COVER T 107500 BLADE ASSEMBLING/DISASSEMBLING
WRENCH
SW109200 SCREW FOR SHARPENER CAP FIXING SW1241SCPL REAR PROTECTION SET T 100200 MOTOR COVER FIXING SCREW T 107600 DRIFT LOCKING THE BLADE
SW109300 WASHER SW1244S FRONT PROTECTION GUARD T 100201 CONNECTOR SOCKET FIXING S CREW T 107900 LUBRICATING GREASE
SW120400 MOTOR BEARING ADJUSTING SCREW SW1244SCPL FRONT PROTECTION S ET T 100300 ADJUSTING DEVICE LOCKING S CREW T864500 FRONT GUARD FIXING S C REW
SW120500 THRUS T BEARING BELLEVILLE
WAS HER SW1255MS COMPLETE MOTOR SUPPORT T 100600 MOTOR BRUSHES T864600 WASHER
SW121000 MOTOR BEARING L9 SW125600 SUB-BLADE RING T 100700 BRUS H HOLDER
SW121200 ANTI-GREASE WAS HER SW126101 BLADEGUIDE PIN T 100800 BRUS H HOLDER CLIP

T107900
T107600
T107500
T1027CPL
SW121800-1P
SW121801CPL-1P
SW126201-1P
T101801
T100600
T102904L
SW120500
T100300
T100900
T100900
SW120400
T100102
T102100
SW1022S
T100700
T102201
T102001
T100800
T100201
T 100200
T102702
SW1219S
SW121700
SW122000
SW121500
SW121600
SW121200
SW121000
SW 1037S
SW 1029S
SW126201-1P
SW126103
12SHSS
SW126101
SW127201
SW126102
SW126300
SW107900
SW1076S
T104800
T104700
SW127201SW127501
SW127500
SW127600
SW127502
SW108200
T105300
T105200
SW124000
SW124101
SW109300
SW109200
SW109000
SW1286CPL
SW109100
SW108800
SW108900
SW108700
SW128600
SW123900
SW1241SCPL
SW1241S
SW1244SCPL
T864600
T864500
SW1244S
SW1255MS
T105400
SW125600
SW1238S
SW1081S
SW1080S
SW1290MS
SW1290MSCPL
SW1213P (220 V, 50-60 Hz) SW121301P (110V, 50-60 Hz)

WARRANTY
Rasor®Elettromeccanica S.r.l. cutting unit has a 12 month warranty from the date indicated
on the last page of this manual, except in case of different written agreements.
The warranty covers all manufacturing and material defects. Replacement and repair operations
are covered only if carried out by our company and at our workshop. If in-warranty goods
need to be repaired, the customer must always send the complete machine to Rasor®.
Single units will not be repaired under warranty.
The material to be repaired must be sent CARRIAGE FREE.
Once the machine has been repaired, it will be sent CARRIAGE FORWARD to the customer.
The warranty covers neither technicians' intervention on site nor the cutting unit disassembly
from the installation place.
If, for practical reasons, one of our technicians is sent to the premises, the customer will be
charged the costs plus the travelling expenses.
The warranty does not include:
failure caused by wrong use or assembly,
failure caused by external agents,
failure caused by lack of maintenance or neglicence;
blades and parts subject to wear.
WARRANTY FORFEITURE:
In case of arrearage or other breaches of contract,
Whenever changes or repairs are carried out on our cutting units without our prior
authorization,
Whenever the serial number is tampered with or cancelled,
Whenever the damage is caused by improper use, bad treatment, bumps, falls and
other causes not due to normal working conditions,
Whenever the unit seems tampered with, dismantled or previously repaired by
unauthorized staff,
In case the cutting units are used for purposes that are different from the ones
described in this manual,
In case non-original spare parts are used.
All repair operations carried out under warranty do not interrupt its duration.
All disputes will be settled in the court of justice of Milan (Italy).
We thank you in advance for the attention you will pay to this manual and we invite you to
inform us of any change you deem necessary to improve it and make it more complete.

RASOR ELETTROMECCANICA SRL
Via Vincenzo Caldesi 6
20161 Milan ∙ Italy
ph. [phone]
fax [phone]
[email protected]
www.rasor-cutters.com
FOLLOW US: