Regency ONCSLFBK6020 TT6020 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and a rubber mallet.
Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
CARTONS: TT6020, PLF3020, PSC3020
LS-E
TT-H
PED-L
LS-D
Parts :
PED-M LS-B
LS-A
LS-G
LS-A: Back Panel
(28” x 17.25” x 1”)
Quantity: 1
LS-D: Foot Bracket
(19.75”D)
Quantity: 2
LS-C: Top Panel
(28” x 16” x 1”)
Quantity: 1
LS-B: Base Panel
(28” x 19” x 1”)
Quantity: 1
LS-E: Shelf
(28” x 17.75” x 1”)
Quantity: 1
LS-G: Right Side
(19.75” x 17” x 1”)
Quantity: 1
LS-F: Left Side
(19.75” x 17” x 1”)
Quantity: 1
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
Figure 1:
TT-H: Credenza Top
(59” x 19.75” x 1”)
Quantity: 1
(59” x 19.75” x 1”)
Parts List continued on back.
LS-F
Lateral/ Single Shelf
Low Credenza
Page 1

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
K: 1.5” Medium Bolts
(38mm)
Quantity: 8
T: Handles
Quantity: 4
L: 2.35” Long Bolts
(60mm)
Quantity: 4
U: Connector
Quantity: 2
PED-L: Lateral
(29.5” x 19.75” x 17.25”)
PED-M: Foot Bracket
(19.75”D)
Quantity: 2
Parts continued:
Hardware :
J: Allen Key
Quantity: 1
M: Wood Cam Pins
Quantity: 14
O: 3/4” Wood Screws
(19mm)
Quantity: 12
N: Shelf Pins
Quantity: 4
Q: Glides
Quantity: 8
P: Cam Caps
Quantity: 14
R: Washers
Quantity: 12
S: 1” Top Screws
(25mm)
Quantity: 8
Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
CARTONS: TT6020, PLF3020, PSC3020
Lateral/ Single Shelf
Low Credenza
Page 2
Quantity: 1

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 1 : Insert 2 Wood Cam Pins(M) into Back Panel(LS-A).
Place Back Panel(LS-A) on a at surface with pins facing up.
STEP 3 : Insert 6 Wood Cam Pins(M) into the Left Side(LS-F)
and Right Side(LS-G).
M
M
LS-A
STEP 4 : Attach the Left Side(LS-F) and Right Side(LS-G)
by inserting and locking cams(Figure 1).
STEP 5 : Pull out each drawer on the Lateral(PED-L) and nd the black tabs at the end of the suspension. Lift one side up and press
the other side down simultaneously and pull the drawer out. This will unlock the drawer and release it. Repeat this for all drawers.
STEP 2 : Attach Base Panel(LS-B) and Top Panel(LS-C) to
Back Panel(LS-A) by inserting and locking cams (Figure 1).
Note: The cam locks on the Base Panel face away from Back
Panel and the cam locks on the Top Panel face the interior.
LS-A
LS-C LS-B
LS-F LS-G
MM
M
M
MM M
M
MM
MM
LS-F LS-G
Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
CARTONS: TT6020, PLF3020, PSC3020
Lateral/ Single Shelf
Low Credenza
Page 3

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
NOTE : PRODUCT IS REVERSIBLE.
PLACE COMPONENTS(LOW LATERAL, OPEN SHELF) NEXT TO EACH OTHER
IN THE ORIENTATION THAT YOU CHOOSE.
STEP 6A : Insert 2 Glides(Q) into each Lateral Foot Bracket(PED-M) and Open Storage Foot Bracket(LS-D).
STEP 6B : On a clean, at surface, lay both components on their backs next to one another. Attach 1 Lateral Foot Bracket(PED-M)
and 1 Open Storage Foot Bracket(LS-D) as shown in Figure 1-A(Left, Right) in the locations shown below(Figure 1).
STEP 6C : Connect both components to one another by following Figure 2 and Figure 3 as shown below.
Figure 1A- Right
Figure 2
Figure 3
U
Figure 1
O
K
O
K
O
K
R
R
R
Figure 1A- Left
OK
OK
O
K
R
R
R
R
RR
R
RR
OO
O
O
OO
KK
LL
LL
U
U
Q
PED-M
QQ
LS-D
Q
Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
CARTONS: TT6020, PLF3020, PSC3020
Lateral/ Single Shelf
Low Credenza
Page 4

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 8 : Insert 4 Shelf Pins(N) in Open Storage Component at desired height and place Shelf(LS-E). Replace File Drawers and
attach Handles(T). Finish by covering all Cam Locks with Cam Caps(P).
STEP 7 : Attach Credenza Top(TT-H) to both Components with 8 Top Screws(S).
TT-H
SS
Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
CARTONS: TT6020, PLF3020, PSC3020
Lateral/ Single Shelf
Low Credenza
Page 5