Regency ONSC3020 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
LS-D
LS-F
LS-D
Parts :
LS-B
LS-G
LS-A: Back Panel
(28” x 17.25” x 1”)
Quantity: 1
LS-D: Foot Bracket
(19.75”D)
Quantity: 2
LS-C: Top Panel
(28” x 16” x 1”)
Quantity: 1
LS-B: Base Panel
(28” x 19” x 1”)
Quantity: 1
LS-E: Shelf
(28” x 17.75” x 1”)
Quantity: 1
LS-G: Right Side
(19.75” x 17” x 1”)
Quantity: 1
LS-F: Left Side
(19.75” x 17” x 1”)
Quantity: 1
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
Figure 1:
TT-G: Component Top
(29.5” x 19.75” x 1”)
Quantity: 1
Parts List continued on back.
LS-A
LS-E
TT-G
Low Open Storage Cabinet • ONSC3020 • INSTRUCTIONS
CARTONS: TT3020, PSC3020
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
Low Open Storage Cabinet
Page 1

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
K: 1.5” Long Bolts
(38mm)
Quantity: 6
Hardware :
J: Allen Key
Quantity: 1
L: Wood Cam Pins
Quantity: 14
N: 3/4” Wood Screws
(19mm)
Quantity: 6
M: Shelf Pins
Quantity: 4
P: Glides
Quantity: 4
O: Cam Caps
Quantity: 14
Q: Washers
Quantity: 6
R: 1” Top Screws
(25mm)
Quantity: 4
S: Insert Covers
Quantity: 8
Low Open Storage Cabinet • ONSC3020 • INSTRUCTIONS
CARTONS: TT3020, PSC3020
Low Open Storage Cabinet
Page 2
STEP 1 : Insert 2 Wood Cam Pins(L) into Back Panel(LS-A).
Place Back Panel(LS-A) on a at surface with pins facing up.
STEP 3 : Insert 6 Wood Cam Pins(L) into the Left Side(LS-F) and Right Side(LS-G).
L
L
LS-A
STEP 2 : Attach Base Panel(LS-B) and Top Panel(LS-C) to
Back Panel(LS-A) by inserting and locking cams (Figure 1).
Note: The cam locks on the Base Panel face away from Back
Panel and the cam locks on the Top Panel face the interior.
LS-A
LS-C LS-B
LS-F LS-G
LL
L
L
LL L
L
LL
LL

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 4 : Attach the Left Side(LS-F) and Right Side(LS-G) by inserting and locking cams(Figure 1).
LS-F LS-G
Low Open Storage Cabinet • ONSC3020 • INSTRUCTIONS
CARTONS: TT3020, PSC3020
Low Open Storage Cabinet
Page 3
STEP 5A : Insert 2 Glides(P) into both Foot Bracket(LS-D).
STEP 5B : Attach 2 Foot Bracket(LS-D) as shown in Figure 1-A(Left, Right) in the locations shown below.
Figure 1A- Right
N
K
N
K
N
K
Q
Q
Q
Figure 1A- Left
NK
NK
N
K
Q
Q
Q
P
LS-D
P
LS-D LS-D
STEP 6 : Attach Component Top(TT-G) to component with 4 Top Screws(R). Then, insert 4 Shelf Pins(M) at desired height and
place Shelf(LS-E).
TT-G
R(4) MM
M
M
LS-E
STEP 7 : Finish by covering all Cam Locks with Cam Caps(O) and Inserts with Insert Covers(S).