Regency ONBFLF3020 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and a rubber mallet.
TT-G
PED-L
PED-M
PED-L: Lateral
(29.5” x 19.75” x 17.25”)
Quantity: 1
TT-G: Top
(29.5” x 19.75” x 1”)
Quantity: 1
PED-M: Foot Bracket
(19.75”D)
Quantity: 2
D: Allen Key
Quantity: 1
E: Set of Keys
Quantity: 1
Parts :
Hardware :
H: 3/4” Wood Screws
(19mm)
Quantity: 6
I: 1” Top Screws
(25mm)
Quantity: 4
J: 1.5” Long Bolts
(38mm)
Quantity: 6
F: Glides
Quantity: 4
G: Washers
Quantity: 6
Low Box File Lateral • ONBFLF3020 • INSTRUCTIONS
CARTONS: TT3020, PLF3020
K: Handles
Quantity: 4
Low Box File Lateral
Page 1

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 2 : Pull out each drawer and nd the black tabs at the end
of the suspension. Lift one side up and press the other side down
simultaneously and pull the drawer out. This will unlock the
drawer and release it. Repeat this for all drawers.
STEP 1A : Insert 2 Glides(F) into each Foot Bracket(PED-M).
STEP 1B : Attach each Foot Bracket(PED-M) to the Lateral(PED-L) by placing 1 Washer(G) between the base and each wood
screw hole on the Foot Brackets (Figure 1). Then, insert 6 Long Bolts(J) and 6 Wood Screws(H) to attach to Lateral(PED-L).
F
PED-M
H
J
J
J
J
J
J
H
H
H
H
H
PED-L
JH
JH
JH
G
G
G
Figure 1
F
STEP 3 : Attach Top(TT-G) to component with 4 Top
Screws(I). Replace File Drawers and attach Handles(K).
TT-G
E
PED-M
PED-M
Low Box File Lateral • ONBFLF3020 • INSTRUCTIONS
CARTONS: TT3020, PLF3020
Low Box File Lateral
Page 2